Re: Getting MRTG to work

Ulrich G. Kliegis
 

Giuseppe,
I un-commented the ethernet-IF part of the cfg file now too, which appears
as windbuedel-3 (cfgmaker-generated).
The error message(s) indivated that I seem to have missed so far to give
rateup correct directions of where to look and where to act.

Here is the reponse from the DOS-Box:

C:\mrtg2171\bin>perl mrtg mrtg.cfg
C:/mrtg2171/bin\rateup: File exists
2011-02-26 12:24:12, Rateup Error: Can't rename
e:\mrtg_data\html\windbuedel_3-d
ay.png.tmp to e:\mrtg_data\html\windbuedel_3-day.png
2011-02-26 12:24:12: WARNING: rateup died from Signal 0
with Exit Value 1 when doing router 'windbuedel_3'
Signal was 0, Returncode was 1
C:/mrtg2171/bin\rateup: File exists
2011-02-26 11:24:12, Rateup Error: Can't rename
e:\mrtg_data\html\windbuedel_dvb
-day.png.tmp to e:\mrtg_data\html\windbuedel_dvb-day.png
2011-02-26 12:24:12: ERROR: Skipping webupdates because rateup did
not return an
ything sensible
2011-02-26 12:24:12: WARNING: rateup died from Signal 0
with Exit Value 1 when doing router 'windbuedel_dvb'
Signal was 0, Returncode was 1

C:\mrtg2171\bin>



And here, sorry for the size, once the complete present mrtg.cfg

# Created by
# cfgmaker public@windbuedel


### Global Config Options

# or for NT
# WorkDir: c:\mrtgdata

WorkDir: e:\mrtg_data\html

### Global Defaults

# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no

#############################################################
#########
# System: WINDBUEDEL
# Description: Hardware: x86 Family 15 Model 31 Stepping 0 AT/AT
COMPATIBLE - Software: Windows 2000 Version 5.1 (Build 2600
Uniprocessor Free)
# Contact:
# Location:
#############################################################
#########


### Interface 1 >> Descr: 'MS-TCP-Loopback-interface' | Name: '' | Ip:
'127.0.0.1' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
#
# Target[windbuedel_1]: 1:public@windbuedel:
# SetEnv[windbuedel_1]: MRTG_INT_IP="127.0.0.1"
MRTG_INT_DESCR="MS-TCP-Loopback-interface"
# MaxBytes[windbuedel_1]: 1250000
# Title[windbuedel_1]: Traffic Analysis for 1 -- WINDBUEDEL
# PageTop[windbuedel_1]: <h1>Traffic Analysis for 1 --
WINDBUEDEL</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>WINDBUEDEL in </td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td></td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>MS-TCP-Loopback-interface
</td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>softwareLoopback (24)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td></td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>1250.0 kBytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>127.0.0.1 (localhost)</td>
# </tr>
# </table>
# </div>


### Interface 3 >> Descr: 'Marvell-Yukon-88E8001/8003/8010-PCI-Gigabit-
Ethernet-Controller---Paketplaner-Miniport' | Name: '' | Ip: '192.168.1.67' |
Eth: '00-13-d4-dc-7b-0c' ###

Target[windbuedel_3]: 3:public@windbuedel:
SetEnv[windbuedel_3]: MRTG_INT_IP="192.168.1.67"
MRTG_INT_DESCR="Marvell-Yukon-88E8001/8003/8010-PCI-Gigabit-
Ethernet-Controller---Paketplaner-Miniport"

Options[windbuedel_3]: growright, bits, noo, unknaszero
MaxBytes[windbuedel_3]: 12500000
Title[windbuedel_3]: Traffic Analysis for 3 -- WINDBUEDEL
PageTop[windbuedel_3]: <h1>Traffic Analysis for 3 -- WINDBUEDEL</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>WINDBUEDEL in Heikendorf /
Germany </td>
</tr>
<tr>
<td>Maintainer: Ulli Kliegis</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>Marvell-Yukon-
88E8001/8003/8010-PCI-Gigabit-Ethernet-Controller---Paketplaner-Miniport
</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.1.67
(windbuedel)</td>
</tr>
</table>
</div>


### Interface 131074 >> Descr: 'TechniSat-DVB-PC-TV-Star-PCI' | Name: ''
| Ip: '192.168.238.238' | Eth: '00-d0-d7-0f-ee-a5' ###


Target[windbuedel_DVB]: /192.168.238.238:public@windbuedel:
SetEnv[windbuedel_DVB]: MRTG_INT_IP="192.168.238.238"
MRTG_INT_DESCR="TechniSat-DVB-PC-TV-Star-PCI"
MaxBytes[windbuedel_DVB]: 12500000

Timezone[windbuedel_DVB]: GMT

YTics[windbuedel_DVB]: 3
Unscaled[windbuedel_DVB]: dwmy
WithPeak[windbuedel_DVB]: ymw
Options[windbuedel_DVB]: growright, bits, noo, unknaszero
YLegend[windbuedel_DVB]: Bits per Second
ShortLegend[windbuedel_DVB]: bps
LegendI[windbuedel_DVB]: bps:&nbsp;
LegendO[windbuedel_DVB]:
Legend1[windbuedel_DVB]: Bits per second
Legend2[windbuedel_DVB]:
Legend3[windbuedel_DVB]: Max. 5 Minute Bits per second
Legend4[windbuedel_DVB]:

Title[windbuedel_DVB]: Traffic Analysis for DVB -- WINDBUEDEL
PageTop[windbuedel_DVB]: <h1>Traffic Analysis for DVB --
WINDBUEDEL</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:Eumetcast-Reception
via </td>
<td>WINDBUEDEL in Heikendorf /
Germany</td>
</tr>
<tr>
<td>Maintainer: Ulli Kliegis</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>TechniSat-DVB-PC-TV-Star-
PCI </td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
</table>
</div>




(EOF)

The temporary DVB- .png image looked correct when I cleared the one that
reatup could not remove and renamed the .tmp one.

That's why I suspect a problem in the environment of rateup.

Thanks for your patience!

Cheers,

U.

Join MSG-1@groups.io to automatically receive all group messages.