Re: New to Metop

geoffreygee90
 

Ian

Thanks for prompt advice. Copy of rec-channels .ini below. Still no data.

Regards.........Geoffrey

# recv-channels.ini - TelliCast+TelliVision Client channel configuration file
#
# 2-4-3 10-10-2005
#

[EUMETSAT Data Channel 1]
target_directory=C:\received\Data Channel 1

[EUMETSAT Data Channel 4]
target_directory=C:\received\Data Channel 4



[EUMETSAT Data Channel 2]
target_directory=C:\received\Data Channel 2

[EUMETSAT Data Channel 3]
target_directory=C:\received\Data Channel 3

[EPS-10]
target_directory=C:\received\EPS-10

# target_directory: Directory for received files. The target_directory name
# is relative to the current working directory.
# syntax: target_directory=<directory>
# default: received

tmp_directory=receiving/tmp/files
# tmp_directory: If this parameter is given tc-recv will internally
# store/compose all received files within the given directory and
# later move them to the target directory.
# While this option requires an additional move operation it
# guarantees that all files appearing in the target directory are
# fully written to the file system.
# syntax: tmp_directory=<directory>
# default: undefined=off, but default value may be redefined in
# recv.ini




# Section per channel or channel group identified by channel name (wildcard
# "*" allowed at end of name)

#activate_ftp_forwarding=1
# activate_ftp_forwarding: Will activate FTP forwarding for the correctly
# received files according to the recv.ini [ftp_forwarding]
# parameters.
# syntax: activate_ftp_forwarding=<value of range>
# range: 0/1
# default: 0=off

#tmp_directory=receiving/tmp/files
# tmp_directory: If this parameter is given tc-recv will internally
# store/compose all received files within the given directory and
# later move them to the target directory.
# While this option requires an additional move operation it
# guarantees that all files appearing in the target directory are
# fully written to the file system.
# syntax: tmp_directory=<directory>
# default: undefined=off, but default value may be redefined in
# recv.ini

#tmp_prefix=.
# tmp_prefix: Like tmp_directory, but files are composed within the final
# target directories but stored with the given prefix in front of
# the normal filenames until the files are fully written.
# syntax: tmp_prefix=<file name start>
# default: undefined=off, but default value may be redefined in
# recv.ini

#tmp_suffix=.tmp
# tmp_suffix: Like tmp_prefix, but adding a suffix to the normal filenames
# until the files are fully written.
# syntax: tmp_suffix=<file suffix>
# default: undefined=off, but default value may be redefined in
# recv.ini

----- Original Message -----
From: Ian Deans
To: MSG-1@...
Sent: Wednesday, February 16, 2011 5:36 PM
Subject: Re: [MSG-1] New to Metop



Hello Geoffrey

Douglas was correct in getting you to change your first line to [EPS-10] but
your second ( target_directory ) line should requires changing as well.

You have target_directory=C:&#92;received&#92;Data Channel EPS-10. It should be
target_directory=C:&#92;received&#92;EPS-10 for your set-up.

Try that and let me know if it helps.

Regards
Ian.

-----Original Message-----
From: Geoffrey Gee
Sent: Wednesday, February 16, 2011 5:24 PM
To: MSG1 Yahoo Group
Subject: [MSG-1] New to Metop

Douglas

Many thanks. I have carried out your advice. Regret still no data. I have
probably made some silly mistake as I am not very computer programming
savvy.

Regards............Geoffrey






------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.872 / Virus Database: 271.1.1/3446 - Release Date: 02/15/11 20:20:00

Join MSG-1@groups.io to automatically receive all group messages.