I’m confused! Winkeyer supports RTTY? I just looked at the “Applications that support WinKeyer 3” and MMTTY isn’t on that list. So I suspect Stand Alone use is probably not an option.

Good Afternoon All, Have any of you 590SG users been able to interface the K1EL WKUSB Winkeyer3 with MMTTY for stand alone Use with True FSK RTTY? Now before this opens Pandora's box with FSK / AFSK

I had everything on MMTTY setup on my computer to key my IC7300. I followed steps from YouTube videos. It was working just fine. Then I jumped off for a little bit and got back on. The program would

hey ya'll so this is my setup i have a home-built PC running win 10 and a Icom IC-756 Pro 2 connect to the PC via a USB cable and a audio cable going into a USB sound card with the sound out patched

The FT-891 does do true FSK as well as AFSK RTTY, and of course PSK, FT8, SSTV, FAX or other data modes. Its just a matter of having the correct interface and the radio menu settings correct. The

MMTTY doesn't really use CAT (or CI-V ICOM) commands. And as far as I can tell the FT891 doesn't do true FSK. It's predecessor, the 857 didn't either. Plenty of radios from the 1980s and 90s do. Looks

Hi Paul, my email is joe.dempster@gmail. I could send you some screen shots of my MMTTY setup if needed. MMTY Profile is MMTY default FT-891: MTTY TX does key the 891. AFC is on, but at this time

Hi Joe, I've been away from this reflector for a bit, so may have missed any earlier posts about the FT-891 and MMTTY. I have used my FT-891 with a SCU-17 and also a home brew cable. Can you provide

I can copy FSK31 on another Windows 10 control app. I have been working off and on for a couple of days and have not made any progress. RX of random characters MMTTY will key the FT-891 Has anyone

Good Info on this here ; https://www.g4irn.com/home/articles-information/ftdx101-setup-with-dx4win-wsjt-x and https://www.facebook.com/groups/509872529941852/

Thanks Joe, that was fast. I'll carry on then, can't wait to get back on RTTY.

Entirely normal. If your 7300 is set to the default settings for CI-V Transceive (ON), simply select Icom CI-V (no inquiry). If you have set CI-V Transceive to OFF (for working with another logging

Just installing MMTTY for the first time and got as far as setting up the radio (IC-7300). I will be using the USB on the radio for rig control and audio in/out using AFSK. I selected Icom in the

Thanks Jamie I’ve resolved the issue by changing the alignment frequency for MMTTY in N1MM+ digital mode settings to 1500 Hz rather than the 2125 that it had defaulted to. I understood the

I dont use AFSK, but if its working in FSK and not AFSK, I'm guessing the offset is set incorrectly or differently. with AFSK you need to tune off the carrier freq to properly decode, depending on the

Things have moved on since I sent the earlier email I can now send and receive using FSK using MMTTY (with or without N1MM logger) with the radio in ‘RTTY’ mode. A bonus is having the decode

Jamie I got myself an IC7610 As you mention, you can use the two virtual ports that the 7610 sets up on the USB interface. I have FSK working from MMTTY/EXTFSK – but only if the radio is

I tested N1MM, it is very complicated there are too much « bells and whistles », config for each contest look like a marathon.... In UCX Log nothing to config, only the drive for backup automatic...

To everybody that assisted I got it working, I wanted to get mmty working as a stand alone first. than sue it with another logging program. All of the videos jump

Tnx for the info. I just received my New 7300 yesterday and was planing on setting it up today. I'm sure that you just saved me what little hair I have left on my hear.. Joe K2DS