Fraser Island.


Dick Holland <rholland@...>
 

Just came back from a jaunt to Fraser Island. In the bar at one of the resorts there is a photograph of a steam loco. It is a boxy looking arrangement, looks like a smaller version of the SMR locos.

The caption said words to the effect that this loco was used on a timber tramway on the island.

Any further information would be appreciated.

Dick Holland
Broken Hill
____________________________________________
Richard Holland

Regional Inspector
Far West - Broken Hill

rholland@rspcansw.org.au
Mobile : 0427 010 184
www.rspcansw.org.au


Frank Stamford
 

Hello Dick,

This was probably an ex-QGR 4D10 class 2-4-4T loco originally built in 1867 as an A10 class 2-4-0 loco. From certain angles (three-quarter rear) this loco looked "boxy".

It worked on an eight mile timber tramway owned by Hyne and Wilson Hart, and worked on Fraser Island from 1906 to 1923.

There were other steam locos and other timber tramways on Fraser Island, but this is probably the one in the photo.

(This information is from the late John Kerr's book "Tall Timber and Tramlines in Queensland" which is to be published early next year.

Regards,

Frank Stamford

At 08:39 AM 10/11/2006, you wrote:


Just came back from a jaunt to Fraser Island. In the bar at one of the resorts there is a photograph of a steam loco. It is a boxy looking arrangement, looks like a smaller version of the SMR locos.

The caption said words to the effect that this loco was used on a timber tramway on the island.

Any further information would be appreciated.

Dick Holland
Broken Hill


Ron Aubrey <kathyanne1@...>
 

Hi Dick,

Yes, Frank is correct. That particular photo is available as a poster.

Ron A., Yandina, Qld.

----- Original Message -----
From: Dick Holland
To: LRRSA@yahoogroups.com.au
Sent: Friday, November 10, 2006 7:39 AM
Subject: [LRRSA] Fraser Island.



Just came back from a jaunt to Fraser Island. In the bar at one of the resorts there is a photograph of a steam loco. It is a boxy looking arrangement, looks like a smaller version of the SMR locos.

The caption said words to the effect that this loco was used on a timber tramway on the island.

Any further information would be appreciated.

Dick Holland
Broken Hill
____________________________________________
Richard Holland

Regional Inspector
Far West - Broken Hill

rholland@rspcansw.org.au
Mobile : 0427 010 184
www.rspcansw.org.au








------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.1/527 - Release Date: 11/9/2006

----------

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.1/527 - Release Date: 11/9/2006


Mark Trainbrain
 

Dick and Frank,
Wasn't there a class A Climax on the island, which would look rather boxy
too? Though that would be easy to distinguish from a conventional loco I
would expect.
Regards,
Mark K
Sydney Aus

-----Original Message-----
From: Frank Stamford
Subject: Re: [LRRSA] Fraser Island.


Hello Dick,

This was probably an ex-QGR 4D10 class 2-4-4T loco originally built in 1867
as an A10 class 2-4-0 loco. From certain angles (three-quarter rear) this
loco looked "boxy".

It worked on an eight mile timber tramway owned by Hyne and Wilson Hart,
and worked on Fraser Island from 1906 to 1923.

There were other steam locos and other timber tramways on Fraser Island,
but this is probably the one in the photo.

(This information is from the late John Kerr's book "Tall Timber and
Tramlines in Queensland" which is to be published early next year.

Regards,

Frank Stamford



At 08:39 AM 10/11/2006, you wrote:


Just came back from a jaunt to Fraser Island. In the bar at one of the
resorts there is a photograph of a steam loco. It is a boxy looking
arrangement, looks like a smaller version of the SMR locos.

The caption said words to the effect that this loco was used on a timber
tramway on the island.

Any further information would be appreciated.

Dick Holland
Broken Hill


Frank Stamford
 

Mark,

Yes there was a A class Climax but it bore very little resemblance to "a smaller version of the SMR locos".

Regards,

Frank

At 01:31 PM 10/11/2006, you wrote:

Dick and Frank,
Wasn't there a class A Climax on the island, which would look rather boxy
too? Though that would be easy to distinguish from a conventional loco I
would expect.
Regards,
Mark K
Sydney Aus

-----Original Message-----
From: Frank Stamford
Subject: Re: [LRRSA] Fraser Island.

Hello Dick,

This was probably an ex-QGR 4D10 class 2-4-4T loco originally built in 1867
as an A10 class 2-4-0 loco. From certain angles (three-quarter rear) this
loco looked "boxy".

It worked on an eight mile timber tramway owned by Hyne and Wilson Hart,
and worked on Fraser Island from 1906 to 1923.

There were other steam locos and other timber tramways on Fraser Island,
but this is probably the one in the photo.

(This information is from the late John Kerr's book "Tall Timber and
Tramlines in Queensland" which is to be published early next year.

Regards,

Frank Stamford

At 08:39 AM 10/11/2006, you wrote:

Just came back from a jaunt to Fraser Island. In the bar at one of the
resorts there is a photograph of a steam loco. It is a boxy looking
arrangement, looks like a smaller version of the SMR locos.

The caption said words to the effect that this loco was used on a timber
tramway on the island.

Any further information would be appreciated.

Dick Holland
Broken Hill