Date   

Walhalla Centenary Photographs Required

John Dennis <jdennis@...>
 

Hi All,

I am writing my regular Narrow Gauge Downunder column on this amazing
event at Walhalla. I was there on the Sunday, in the wet, and my
photographs do not do justice to the day. Although I have made
arrangements with someone to supply some photos, they have not yet
arrived and the deadline is fast approaching.

Does anybody have any high quality photos they are prepared to supply
to me for the magazine, just in case those previously arranged don't
appear? I'm only looking for three or four photos, preferably spread
over both days., and as I said, as a backup.

Please reply off-line if you are able to help.

Cheers,
John
==========================================================
John Dennis jdennis@...
Melbourne,Australia Home of the HOn30 Dutton Bay Tramway
and the Australian Narrow Gauge Web-Exhibition Gallery
Dutton Bay URL: http://members.optusnet.com.au/duttonbay
WebX http://members.optusnet.com.au/jdennis/ng_webex.html


EMB loco drawings

A C Lynn Zelmer
 

Thanks everyone who responded, both on and off line, I think that Steve has information (and potential further contacts) to make his 7/8" loco erection drawings... even if, like many of us, the model doesn't get built as soon as he would like.
:-)

Incidentally, my apologies if individuals didn't get a direct contact... yahoogroups seems to have had a hiccup at some point so that I didn't get some of the group messages via e-mail, and when I checked the web site one of the group messages I did get wasn't listed. Technology!

Happy modelling,
Lynn
--
Lynn Zelmer
Box 1414, Rockhampton QLD 4700 Australia
http://www.zelmeroz.com


Re: Kiama tramway

Terry
 

I was fascinated to read the items about the Kiama blue metal tramway
and thank the several contributors for some very interesting information

As a very young enthusiast in the 1940s I walked the branch line from
the NSWGR yard and the main line from the wharf to the quarry and
although the years have dimmed my memory somewhat I can clearly remember
being fascinated by the sight of a diminutive steam locomotive just
behind a fence but close to the public road and a number of wagons under
the crushers. At that stage the quarry was not operating and lantana had
started to intrude

Being young and in fear of parental or police retribution I resisted the
urge to enter the enclosed area at the quarry although I did walk out
along the tracks above the bins on the wharf - with fear of falling into
the bins. How I wished I could have gone closer to the locomotive and
peeked into the engine shed!

I am intrigued to read remarks about standard guage operations in the
Kiama quarries and even more so about about such a line to a wharf and
hope that someone will write more about the latter and indicate where
the wharf was located

Thanks for enjoyment

Terry


Timbertown Wauchope

John Browning
 

It appears that the new operators of Timbertown have been active in ensuring
that 2ft gauge operations resume soon.


The resumption date is fixed for 15 December.





Apparently they are looking for volunteer involvement, or maybe you would
just like to ride on the first train:





We only ask all volunteers to register their interest or intentions in
coming in 24 hours prior so we can organise ourselves and prepare meal
vouchers, etc.


Many tasks required to complete the railway will be carried out undercover
for obvious reasons. All volunteers are required to sign in and out not only
for insurance reasons but also for our annual reward program.


Finally as part of the re-launch we will run the railway on the 15th of
December to pre booked ticket holders. The railway will operate as a
independent part of the park as a not-for-profit organisation. The very
first run will be limited to 70 persons with some very special guests
invited, everyone will receive a limited edition bottle of port celebrating
the occasion, canapés, food, beer, wine and of course champagne and live
music, entertainment and the list goes on with of course the once in a
lifetime opportunity to take part.


Starting time will be 2.00pm. Train departs at 3.01 pm with the celebrations
concluding at 4.00pm. Very well priced at only $95.00 per person with ALL
PROFIT to be returned to the railway and future work including our planned
2011 ground up restoration of our Hudswell Clarke locomotive.


Public running will commence on Thursday the 16th December..


Huge thank you in advance, park custodians

David & Alison Waite





And here is the announcement about the resumption of operations:





Timbertown - Back on Track!!!!!!


Good evening all. Welcome to all those new subscribers to our November
update.


Very very exciting times ahead in just a few more weeks as we put together
the biggest re-launch in the park’s history, and now I will let all
subscribers in on the big news..................





December 15th 3.01 pm will be the official re-launch of the


TIMBERTOWN HERITAGE RAILWAY


and it has been a long time coming, nearly two years believe it or not, and
the smiles in the park keep getting bigger and bigger!





So far enormous effort has been put in by our staff and volunteers with many
outsiders suggesting we would never have our famous railway running again we
are about to prove them all wrong.


Our fowler locomotive is being lovingly put back together getting a fresh
coat of paint. All machining has been done with lots of painting about to
take place as soon as the rain finds someone else to annoy. The park has
seen some big changes already in the past 5 months since our arrival
starting with a complete new 7¼ inch railway achieved in just 8 days.


WE ARE CALLING ALL VOLUNTEERS TO ACTION. INTERESTED PERSONS CAN ENJOY
WORKING IN THE WORLDS BEST ENVIROMENT IN THE FOLLOWING AREAS. Railway
operations, gardening, landcare, steam sawmill operations, customer
interaction, animals, heavy horses, model engineering and miniature railway
running and many other areas including restoration and running of our
extensive collection of early oil engines. Learn new skills, meet new
people, enjoy a lovely lunch and have FUN.





John







logo



John Browning

PO Box 99

Annerley 4103

Queensland

Australia









Phone +61 (0)7 3255 9084

Mobile 0407 069 199







[Non-text portions of this message have been removed]


Re: Kiama tramway

bjr2105
 

From information that I have, all three steam tram motors were scrapped in
1938, but I have no idea in which month(s).



Tram motor 11A was sent to Railways Bombo Quarry, ex-Newcastle, in December
1926

Tram motor 53A was sent to Railways Bombo Quarry, ex-Newcastle, in May 1927

Tram motor 118A was sent to Railways Bombo Quarry, ex-Newcastle, in November
1926



It is interesting to note that these would have steamed from Newcastle to
Sydney to Bombo under their own power, but the usual maximum speed was 4
m.p.h., especially through points and crossings due to the tramway profile
wheels, which would have made for a VERY long travel time indeed…!



From my knowledge of the Weekly Notices, there is nothing in them for the
periods in question, as they stopped giving transfer info for steam trams in
them around 1917.



As you say, more for the bigger picture.



Bruce Rankin



From: LRRSA@... [mailto:LRRSA@...] On Behalf
Of saundersbruce78
Sent: Friday, November 19, 2010 9:16 PM
To: LRRSA@...
Subject: [LRRSA] Re: Kiama tramway





Further to the comments on Bombo Railway Quarry I can confirm that the three
steam trams were in service at Bombo by a document containing fusible plug
change records being boiler numbers 11A, 53A,118A. The dates in service(at
least the fusible plugs were being changed was from April 1927 till August
1929 then shows out of service from then till the document finishes December
1935.

Also Vulcan locomotive 1022 was on loan to Bombo November/December 1927.Then
to Enfield Then back to Bombo Quarry May 1931 till December 1931.

Vulcan Locomotive 1023 from January 1928 till August 1928 then out of
service at Bombo before being transferred back to Thirroul as spare.Then to
Enfield before back to Bombo for April 1931 only.

It would be interesting to know if there are any documents showing
locomotive transfers or weekly notices etc for this time period.It would
also be interesting to find out when these steam trams were eventually
scrapped. It all adds to the bigger picture.
Regards
Bruce Saunders

--- In LRRSA@... <mailto:LRRSA%40yahoogroups.com.au> ,
richard horne <rthorne475@...> wrote:

Further to my previous comments on the Kiama quarry's internal combustion
locos, I've now spoken to Bruce Macdonald. He confirms that on a visit to
the quarry c1947, there were traces of standard gauge track in the upper
quarry (further along Terralong Street, to the west of the quarry in which
the 2'0" gauge locos worked). It was several hundred yards from the quarry
face to the crusher so he felt it was quite plausible that a (standard
gauge) loco was used,

Bruce said that there were two standard gauge Purcell/Caldwell Vale i.c.
locos used at Minnamurra Quarry on the South Coast, so one could conceivably
have ended up at Kiama. Bruce discovered one of this pair 'quite recently'
(i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary
Bros., Bombo.

Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram
locos, that Mark refers to, there were in fact two such operations. They
were not actually in Kiama, but just to the north at Bombo. The Bombo Old
State Quarry used ex NSWGT motors 51A and 54A. The Bombo Railway Quarry
used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as
NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).

Although Bruce has some works photographs and other information on Gibson
Battle, he has no record of all the i.c. locos produced, nor knowledge of
where or if any company records survive.

Richard Horne.

--- On Wed, 17/11/10, Mark Kendrick <trainbrain@...> wrote:

From: Mark Kendrick <trainbrain@...>
Subject: Re: [LRRSA] Kiama tramway
To: LRRSA@... <mailto:LRRSA%40yahoogroups.com.au>
Date: Wednesday, 17 November, 2010, 10:28







Â









Hi,

Just further to the original query, in case this detail was missed,

there was more than one tramway in the Kiama area. Aside from the well

known ~2' gauge tram, one was standard gauge between another quarry and

wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge

was used at Avon Dam?

Cheers,

Mark K



On 13/11/2010 4:16 PM, Neville Conder wrote:

Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time
they were there. A interesting one was as follows: 1927, Gibson Battle,
petrol electric Ex Avon Dam, built in April 1921.

I thought I knew a lot about the tramway but this a new one for me. Does
anyone have any information on this loco. Did it actual work on the tramway.

Any information would be appreciated.
Neville
[Non-text portions of this message have been removed]






















[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]


Re: Kiama tramway

saundersbruce78 <bjsaunders1@...>
 

Further to the comments on Bombo Railway Quarry I can confirm that the three steam trams were in service at Bombo by a document containing fusible plug change records being boiler numbers 11A, 53A,118A. The dates in service(at least the fusible plugs were being changed was from April 1927 till August 1929 then shows out of service from then till the document finishes December 1935.

Also Vulcan locomotive 1022 was on loan to Bombo November/December 1927.Then to Enfield Then back to Bombo Quarry May 1931 till December 1931.

Vulcan Locomotive 1023 from January 1928 till August 1928 then out of service at Bombo before being transferred back to Thirroul as spare.Then to Enfield before back to Bombo for April 1931 only.

It would be interesting to know if there are any documents showing locomotive transfers or weekly notices etc for this time period.It would also be interesting to find out when these steam trams were eventually scrapped. It all adds to the bigger picture.
Regards
Bruce Saunders

--- In LRRSA@..., richard horne <rthorne475@...> wrote:

Further to my previous comments on the Kiama quarry's internal combustion locos, I've now spoken to Bruce Macdonald.  He confirms that on a visit to the quarry c1947, there were traces of standard gauge track in the upper quarry (further along Terralong Street, to the west of the quarry in which the 2'0" gauge locos worked).  It was several hundred yards from the quarry face to the crusher so he felt it was quite plausible that a (standard gauge) loco was used,

Bruce said that there were two standard gauge Purcell/Caldwell Vale i.c. locos used at Minnamurra Quarry on the South Coast, so one could conceivably have ended up at Kiama.  Bruce discovered one of this pair 'quite recently' (i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary Bros., Bombo.

Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram locos, that Mark refers to, there were in fact two such operations.  They were not actually in Kiama, but just to the north at Bombo.  The Bombo Old State Quarry used ex NSWGT motors 51A and 54A.  The Bombo Railway Quarry used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).

Although Bruce has some works photographs and other information on Gibson Battle, he has no record of all the i.c. locos produced, nor knowledge of where or if any company records survive.

Richard Horne.

--- On Wed, 17/11/10, Mark Kendrick <trainbrain@...> wrote:

From: Mark Kendrick <trainbrain@...>
Subject: Re: [LRRSA] Kiama tramway
To: LRRSA@...
Date: Wednesday, 17 November, 2010, 10:28







 









Hi,

Just further to the original query, in case this detail was missed,

there was more than one tramway in the Kiama area. Aside from the well

known ~2' gauge tram, one was standard gauge between another quarry and

wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge

was used at Avon Dam?

Cheers,

Mark K



On 13/11/2010 4:16 PM, Neville Conder wrote:

Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
Any information would be appreciated.
Neville
[Non-text portions of this message have been removed]






















[Non-text portions of this message have been removed]


EMB DH loco erection drawings

A C Lynn Zelmer
 

G'day

I have a US modelling colleague who is thinking of building a Baldwin DH such as Coolum in 7/8" scale and is looking for the equivalent of erection drawings... particularly drawings of the bogies as they aren't terribly visible in most photos.

Any suggestions? Or good photos with some field dimensions?

Ta, Lynn
--
Lynn Zelmer
Box 1414, Rockhampton QLD 4700 Australia
http://www.zelmeroz.com


Re: Kiama tramway

neville conder
 

Hi Mike
Looking on the NLA website one of the articles was about the shays for the Wolgan Valley been erected at Everley workshops for Gibson Battle.
Neville

----- Original Message -----
From: The Bickfords
To: LRRSA@...
Sent: Thursday, November 18, 2010 10:45 PM
Subject: Re: [LRRSA] Kiama tramway



Hi Neville,

Gibson Battle were the agents for the Shay locomotive in Australia.

There was series of articles about the Kiama Tramway by Ken McCarthy in
Trolley Wire, issues 166,167 & 168 in 1976.
It refers to the Gibson Battle petrol electric loco and includes a photo of
the remains in the late 1950's
The loco was originally supplied in 1921 for the construction of Avon dam
and came to Kiama in 1927.

The ARHS Bulletin for October 1989 has an article by John Newland about the
various locos tendered for use at Wyangala Dam.
Included in the large list of locos offered is a Gibson Battle petrol
electric, so they must have supplied a few locos over the years.

cheers,
Mike Bickford

----- Original Message -----
From: "neville conder" <nconder@...>
To: <LRRSA@...>
Sent: Thursday, November 18, 2010 10:57 AM
Subject: Re: [LRRSA] Kiama tramway

> Hi all
> Thanks for the information on the Kiama tramway. At the museum it gave a
> timeline of all the locomotives that worked on the tramway to Pikes Hill
> down Terralong Street to the harbour and to the railway yard. I'll have to
> contact the museum to see where the information came from as it was not
> there 5 or 6 years ago when I last went there. I might have to go this
> lunchtime to see what I can find out.
> The steam shovel I suspect it might be in one of the quarries at Bombo.
> Even though Terralong Tracks was an interesting book it was a bit short on
> detail but at least it brought my attention to the tramway. Don Cottee one
> of the authors when he moved from Kiama in the 90's I had to remove wheel
> sets from under his house for the new owner. But I didn't think they came
> from Kiama as the gauge was around 2' 4" so I suspect they came from a
> factory somewhere.
> On another query in the National Library photos there are photos of the
> Nestles factory at Abbortford with a tramway running to wharf on the
> Parramatta River.
> Thats enough for today I better get back to work
> Neville
> ----- Original Message -----
> From: Mark Kendrick
> To: LRRSA@...
> Sent: Thursday, November 18, 2010 9:51 AM
> Subject: Re: [LRRSA] Kiama tramway
>
>
>
> Hi Richard, all,
> The standard gauge higher up in the quarry wouldn't have been for a
> rail mounted steam navvy, would it? In the Terralong Tracks book there
> is a photo of a tracked steam navvy simply credited as being at Kiama.
> The same book has views of the Pikes Hill quarry, with 2' gauge lines
> running to the upper level of the quarry, though no steam navvies are
> visible in the photos of the quarry itself. A diagram shows extensive 2'
> gauge access to the quarry face, including wagon turntables, so would
> likely have been animal or hand worked at that level.
> -Mark
>
> On 18/11/2010 6:01 AM, richard horne wrote:
> > Further to my previous comments on the Kiama quarry's internal
> combustion locos, I've now spoken to Bruce Macdonald. He confirms that on
> a visit to the quarry c1947, there were traces of standard gauge track in
> the upper quarry (further along Terralong Street, to the west of the
> quarry in which the 2'0" gauge locos worked). It was several hundred yards
> from the quarry face to the crusher so he felt it was quite plausible that
> a (standard gauge) loco was used,
> >
> > Bruce said that there were two standard gauge Purcell/Caldwell Vale
> i.c. locos used at Minnamurra Quarry on the South Coast, so one could
> conceivably have ended up at Kiama. Bruce discovered one of this pair
> 'quite recently' (i.e. about 40 years ago!) among the junk in the
> quarryman's yard of Cleary Bros., Bombo.
> >
> > Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram
> locos, that Mark refers to, there were in fact two such operations. They
> were not actually in Kiama, but just to the north at Bombo. The Bombo Old
> State Quarry used ex NSWGT motors 51A and 54A. The Bombo Railway Quarry
> used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well
> as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).
> >
> > Although Bruce has some works photographs and other information on
> Gibson Battle, he has no record of all the i.c. locos produced, nor
> knowledge of where or if any company records survive.
> >
> > Richard Horne.
> >
> > --- On Wed, 17/11/10, Mark Kendrick<trainbrain@...> wrote:
> >
> > From: Mark Kendrick<trainbrain@...>
> > Subject: Re: [LRRSA] Kiama tramway
> > To: LRRSA@...
> > Date: Wednesday, 17 November, 2010, 10:28
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hi,
> >
> > Just further to the original query, in case this detail was missed,
> >
> > there was more than one tramway in the Kiama area. Aside from the well
> >
> > known ~2' gauge tram, one was standard gauge between another quarry and
> >
> > wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge
> >
> > was used at Avon Dam?
> >
> > Cheers,
> >
> > Mark K
> >
> >
> >
> > On 13/11/2010 4:16 PM, Neville Conder wrote:
> >
> >> Afternoon all
> >> Been visiting the local museum in Kiama today and have a query.
> >> It had a list of locomotives that worked on the tramway and the time
> they were there. A interesting one was as follows: 1927, Gibson Battle,
> petrol electric Ex Avon Dam, built in April 1921.
> >> I thought I knew a lot about the tramway but this a new one for me.
> Does anyone have any information on this loco. Did it actual work on the
> tramway.
> >> Any information would be appreciated.
> >> Neville
> >> [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Material posted on this group may be adapted by the editors of LRRSA
> publications for use in those publications, including Light Railways and
> the LRRSA web-site www.lrrsa.org.au
> >
> > This group is for members who share common interests with the members
> of the LRRSA, but the contents of postings are those of their authors and
> opinions expressed do not necessarily conform with those of any LRRSA
> member nor of the LRRSA Council of Management"
> > Yahoo!7 Groups Links
> >
> >
> >
> >
> >
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Material posted on this group may be adapted by the editors of LRRSA
> publications for use in those publications, including Light Railways and
> the LRRSA web-site www.lrrsa.org.au
>
> This group is for members who share common interests with the members of
> the LRRSA, but the contents of postings are those of their authors and
> opinions expressed do not necessarily conform with those of any LRRSA
> member nor of the LRRSA Council of Management"
> Yahoo!7 Groups Links
>
>
>





[Non-text portions of this message have been removed]


Re: Kiama tramway

The Bickfords <womloc4@...>
 

Hi Neville,

Gibson Battle were the agents for the Shay locomotive in Australia.

There was series of articles about the Kiama Tramway by Ken McCarthy in Trolley Wire, issues 166,167 & 168 in 1976.
It refers to the Gibson Battle petrol electric loco and includes a photo of the remains in the late 1950's
The loco was originally supplied in 1921 for the construction of Avon dam and came to Kiama in 1927.

The ARHS Bulletin for October 1989 has an article by John Newland about the various locos tendered for use at Wyangala Dam.
Included in the large list of locos offered is a Gibson Battle petrol electric, so they must have supplied a few locos over the years.

cheers,
Mike Bickford

----- Original Message -----
From: "neville conder" <nconder@...>
To: <LRRSA@...>
Sent: Thursday, November 18, 2010 10:57 AM
Subject: Re: [LRRSA] Kiama tramway


Hi all
Thanks for the information on the Kiama tramway. At the museum it gave a timeline of all the locomotives that worked on the tramway to Pikes Hill down Terralong Street to the harbour and to the railway yard. I'll have to contact the museum to see where the information came from as it was not there 5 or 6 years ago when I last went there. I might have to go this lunchtime to see what I can find out.
The steam shovel I suspect it might be in one of the quarries at Bombo. Even though Terralong Tracks was an interesting book it was a bit short on detail but at least it brought my attention to the tramway. Don Cottee one of the authors when he moved from Kiama in the 90's I had to remove wheel sets from under his house for the new owner. But I didn't think they came from Kiama as the gauge was around 2' 4" so I suspect they came from a factory somewhere.
On another query in the National Library photos there are photos of the Nestles factory at Abbortford with a tramway running to wharf on the Parramatta River.
Thats enough for today I better get back to work
Neville
----- Original Message -----
From: Mark Kendrick
To: LRRSA@...
Sent: Thursday, November 18, 2010 9:51 AM
Subject: Re: [LRRSA] Kiama tramway



Hi Richard, all,
The standard gauge higher up in the quarry wouldn't have been for a
rail mounted steam navvy, would it? In the Terralong Tracks book there
is a photo of a tracked steam navvy simply credited as being at Kiama.
The same book has views of the Pikes Hill quarry, with 2' gauge lines
running to the upper level of the quarry, though no steam navvies are
visible in the photos of the quarry itself. A diagram shows extensive 2'
gauge access to the quarry face, including wagon turntables, so would
likely have been animal or hand worked at that level.
-Mark

On 18/11/2010 6:01 AM, richard horne wrote:
> Further to my previous comments on the Kiama quarry's internal
combustion locos, I've now spoken to Bruce Macdonald. He confirms that on a visit to the quarry c1947, there were traces of standard gauge track in the upper quarry (further along Terralong Street, to the west of the quarry in which the 2'0" gauge locos worked). It was several hundred yards from the quarry face to the crusher so he felt it was quite plausible that a (standard gauge) loco was used,
>
> Bruce said that there were two standard gauge Purcell/Caldwell Vale
i.c. locos used at Minnamurra Quarry on the South Coast, so one could conceivably have ended up at Kiama. Bruce discovered one of this pair 'quite recently' (i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary Bros., Bombo.
>
> Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram
locos, that Mark refers to, there were in fact two such operations. They were not actually in Kiama, but just to the north at Bombo. The Bombo Old State Quarry used ex NSWGT motors 51A and 54A. The Bombo Railway Quarry used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).
>
> Although Bruce has some works photographs and other information on
Gibson Battle, he has no record of all the i.c. locos produced, nor knowledge of where or if any company records survive.
>
> Richard Horne.
>
> --- On Wed, 17/11/10, Mark Kendrick<trainbrain@...> wrote:
>
> From: Mark Kendrick<trainbrain@...>
> Subject: Re: [LRRSA] Kiama tramway
> To: LRRSA@...
> Date: Wednesday, 17 November, 2010, 10:28
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi,
>
> Just further to the original query, in case this detail was missed,
>
> there was more than one tramway in the Kiama area. Aside from the well
>
> known ~2' gauge tram, one was standard gauge between another quarry and
>
> wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge
>
> was used at Avon Dam?
>
> Cheers,
>
> Mark K
>
>
>
> On 13/11/2010 4:16 PM, Neville Conder wrote:
>
>> Afternoon all
>> Been visiting the local museum in Kiama today and have a query.
>> It had a list of locomotives that worked on the tramway and the time
they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
>> I thought I knew a lot about the tramway but this a new one for me.
Does anyone have any information on this loco. Did it actual work on the tramway.
>> Any information would be appreciated.
>> Neville
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Material posted on this group may be adapted by the editors of LRRSA
publications for use in those publications, including Light Railways and the LRRSA web-site www.lrrsa.org.au
>
> This group is for members who share common interests with the members
of the LRRSA, but the contents of postings are those of their authors and opinions expressed do not necessarily conform with those of any LRRSA member nor of the LRRSA Council of Management"
> Yahoo!7 Groups Links
>
>
>
>
>







------------------------------------

Material posted on this group may be adapted by the editors of LRRSA publications for use in those publications, including Light Railways and the LRRSA web-site www.lrrsa.org.au

This group is for members who share common interests with the members of the LRRSA, but the contents of postings are those of their authors and opinions expressed do not necessarily conform with those of any LRRSA member nor of the LRRSA Council of Management"
Yahoo!7 Groups Links



Re: Kiama tramway

neville conder
 

Hi all
Thanks for the information on the Kiama tramway. At the museum it gave a timeline of all the locomotives that worked on the tramway to Pikes Hill down Terralong Street to the harbour and to the railway yard. I'll have to contact the museum to see where the information came from as it was not there 5 or 6 years ago when I last went there. I might have to go this lunchtime to see what I can find out.
The steam shovel I suspect it might be in one of the quarries at Bombo. Even though Terralong Tracks was an interesting book it was a bit short on detail but at least it brought my attention to the tramway. Don Cottee one of the authors when he moved from Kiama in the 90's I had to remove wheel sets from under his house for the new owner. But I didn't think they came from Kiama as the gauge was around 2' 4" so I suspect they came from a factory somewhere.
On another query in the National Library photos there are photos of the Nestles factory at Abbortford with a tramway running to wharf on the Parramatta River.
Thats enough for today I better get back to work
Neville

----- Original Message -----
From: Mark Kendrick
To: LRRSA@...
Sent: Thursday, November 18, 2010 9:51 AM
Subject: Re: [LRRSA] Kiama tramway



Hi Richard, all,
The standard gauge higher up in the quarry wouldn't have been for a
rail mounted steam navvy, would it? In the Terralong Tracks book there
is a photo of a tracked steam navvy simply credited as being at Kiama.
The same book has views of the Pikes Hill quarry, with 2' gauge lines
running to the upper level of the quarry, though no steam navvies are
visible in the photos of the quarry itself. A diagram shows extensive 2'
gauge access to the quarry face, including wagon turntables, so would
likely have been animal or hand worked at that level.
-Mark

On 18/11/2010 6:01 AM, richard horne wrote:
> Further to my previous comments on the Kiama quarry's internal combustion locos, I've now spoken to Bruce Macdonald. He confirms that on a visit to the quarry c1947, there were traces of standard gauge track in the upper quarry (further along Terralong Street, to the west of the quarry in which the 2'0" gauge locos worked). It was several hundred yards from the quarry face to the crusher so he felt it was quite plausible that a (standard gauge) loco was used,
>
> Bruce said that there were two standard gauge Purcell/Caldwell Vale i.c. locos used at Minnamurra Quarry on the South Coast, so one could conceivably have ended up at Kiama. Bruce discovered one of this pair 'quite recently' (i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary Bros., Bombo.
>
> Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram locos, that Mark refers to, there were in fact two such operations. They were not actually in Kiama, but just to the north at Bombo. The Bombo Old State Quarry used ex NSWGT motors 51A and 54A. The Bombo Railway Quarry used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).
>
> Although Bruce has some works photographs and other information on Gibson Battle, he has no record of all the i.c. locos produced, nor knowledge of where or if any company records survive.
>
> Richard Horne.
>
> --- On Wed, 17/11/10, Mark Kendrick<trainbrain@...> wrote:
>
> From: Mark Kendrick<trainbrain@...>
> Subject: Re: [LRRSA] Kiama tramway
> To: LRRSA@...
> Date: Wednesday, 17 November, 2010, 10:28
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi,
>
> Just further to the original query, in case this detail was missed,
>
> there was more than one tramway in the Kiama area. Aside from the well
>
> known ~2' gauge tram, one was standard gauge between another quarry and
>
> wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge
>
> was used at Avon Dam?
>
> Cheers,
>
> Mark K
>
>
>
> On 13/11/2010 4:16 PM, Neville Conder wrote:
>
>> Afternoon all
>> Been visiting the local museum in Kiama today and have a query.
>> It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
>> I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
>> Any information would be appreciated.
>> Neville
>> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Material posted on this group may be adapted by the editors of LRRSA publications for use in those publications, including Light Railways and the LRRSA web-site www.lrrsa.org.au
>
> This group is for members who share common interests with the members of the LRRSA, but the contents of postings are those of their authors and opinions expressed do not necessarily conform with those of any LRRSA member nor of the LRRSA Council of Management"
> Yahoo!7 Groups Links
>
>
>
>
>




[Non-text portions of this message have been removed]


Re: Kiama tramway

Mark Trainbrain
 

Hi Richard, all,
The standard gauge higher up in the quarry wouldn't have been for a rail mounted steam navvy, would it? In the Terralong Tracks book there is a photo of a tracked steam navvy simply credited as being at Kiama. The same book has views of the Pikes Hill quarry, with 2' gauge lines running to the upper level of the quarry, though no steam navvies are visible in the photos of the quarry itself. A diagram shows extensive 2' gauge access to the quarry face, including wagon turntables, so would likely have been animal or hand worked at that level.
-Mark

On 18/11/2010 6:01 AM, richard horne wrote:
Further to my previous comments on the Kiama quarry's internal combustion locos, I've now spoken to Bruce Macdonald. He confirms that on a visit to the quarry c1947, there were traces of standard gauge track in the upper quarry (further along Terralong Street, to the west of the quarry in which the 2'0" gauge locos worked). It was several hundred yards from the quarry face to the crusher so he felt it was quite plausible that a (standard gauge) loco was used,

Bruce said that there were two standard gauge Purcell/Caldwell Vale i.c. locos used at Minnamurra Quarry on the South Coast, so one could conceivably have ended up at Kiama. Bruce discovered one of this pair 'quite recently' (i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary Bros., Bombo.

Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram locos, that Mark refers to, there were in fact two such operations. They were not actually in Kiama, but just to the north at Bombo. The Bombo Old State Quarry used ex NSWGT motors 51A and 54A. The Bombo Railway Quarry used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).

Although Bruce has some works photographs and other information on Gibson Battle, he has no record of all the i.c. locos produced, nor knowledge of where or if any company records survive.

Richard Horne.

--- On Wed, 17/11/10, Mark Kendrick<trainbrain@...> wrote:

From: Mark Kendrick<trainbrain@...>
Subject: Re: [LRRSA] Kiama tramway
To: LRRSA@...
Date: Wednesday, 17 November, 2010, 10:28
















Hi,

Just further to the original query, in case this detail was missed,

there was more than one tramway in the Kiama area. Aside from the well

known ~2' gauge tram, one was standard gauge between another quarry and

wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge

was used at Avon Dam?

Cheers,

Mark K



On 13/11/2010 4:16 PM, Neville Conder wrote:

Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
Any information would be appreciated.
Neville
























------------------------------------

Material posted on this group may be adapted by the editors of LRRSA publications for use in those publications, including Light Railways and the LRRSA web-site www.lrrsa.org.au

This group is for members who share common interests with the members of the LRRSA, but the contents of postings are those of their authors and opinions expressed do not necessarily conform with those of any LRRSA member nor of the LRRSA Council of Management"
Yahoo!7 Groups Links





Re: Kiama tramway

rthorne475
 

Further to my previous comments on the Kiama quarry's internal combustion locos, I've now spoken to Bruce Macdonald.  He confirms that on a visit to the quarry c1947, there were traces of standard gauge track in the upper quarry (further along Terralong Street, to the west of the quarry in which the 2'0" gauge locos worked).  It was several hundred yards from the quarry face to the crusher so he felt it was quite plausible that a (standard gauge) loco was used,

Bruce said that there were two standard gauge Purcell/Caldwell Vale i.c. locos used at Minnamurra Quarry on the South Coast, so one could conceivably have ended up at Kiama.  Bruce discovered one of this pair 'quite recently' (i.e. about 40 years ago!) among the junk in the quarryman's yard of Cleary Bros., Bombo.

Re the standard gauge quarry line at Kiama, using ex NSWGT steam tram locos, that Mark refers to, there were in fact two such operations.  They were not actually in Kiama, but just to the north at Bombo.  The Bombo Old State Quarry used ex NSWGT motors 51A and 54A.  The Bombo Railway Quarry used ex NSWGT motors 11A, 53A and 118A (originally 17, then N20), as well as NSWGR Vulcan Iron Works 0-4-0ST 1218 (later 1023).

Although Bruce has some works photographs and other information on Gibson Battle, he has no record of all the i.c. locos produced, nor knowledge of where or if any company records survive.

Richard Horne.

--- On Wed, 17/11/10, Mark Kendrick <trainbrain@...> wrote:

From: Mark Kendrick <trainbrain@...>
Subject: Re: [LRRSA] Kiama tramway
To: LRRSA@...
Date: Wednesday, 17 November, 2010, 10:28







 









Hi,

Just further to the original query, in case this detail was missed,

there was more than one tramway in the Kiama area. Aside from the well

known ~2' gauge tram, one was standard gauge between another quarry and

wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge

was used at Avon Dam?

Cheers,

Mark K



On 13/11/2010 4:16 PM, Neville Conder wrote:

Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
Any information would be appreciated.
Neville
[Non-text portions of this message have been removed]


Re: Kiama tramway

Mark Trainbrain
 

Hi,
Just further to the original query, in case this detail was missed, there was more than one tramway in the Kiama area. Aside from the well known ~2' gauge tram, one was standard gauge between another quarry and wharf and used an ex NSWGT steam tram motor, perhaps others. What gauge was used at Avon Dam?
Cheers,
Mark K

On 13/11/2010 4:16 PM, Neville Conder wrote:
Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
Any information would be appreciated.
Neville




Re: Kiama tramway

bjr2105
 

Neville,



Gibson Battle were a well known general machinery merchant and I remember their catalogue was a very well used document in the Babcock & Wilcox drawing office where I worked many years ago.



Have you tried searching on the NLA website? There are more than 10,000 entries for Gibson Battle there. Try the following weblink:



http://trove.nla.gov.au/newspaper/result?q= <http://trove.nla.gov.au/newspaper/result?q=&exactPhrase=gibson+battle&anyWords=&notWords=&l-textSearchScope=*ignore*%7C*ignore*&fromdd=&frommm=&fromyyyy=&todd=&tomm=&toyyyy=&l-word=*ignore*%7C*ignore*&sortby> &exactPhrase=gibson+battle&anyWords=&notWords=&l-textSearchScope=*ignore*%7C*ignore*&fromdd=&frommm=&fromyyyy=&todd=&tomm=&toyyyy=&l-word=*ignore*%7C*ignore*&sortby=



or, if that’s too hard to copy and paste, try the abbreviated version that takes you to exactly the same place:



http://tinyurl.com/35g2fkx



Happy hunting…!



Bruce Rankin



From: LRRSA@... [mailto:LRRSA@...] On Behalf Of neville conder
Sent: Wednesday, November 17, 2010 12:42 PM
To: LRRSA@...
Subject: Re: [LRRSA] Kiama tramway





Thanks Richard for your reply on my query.
I have been searching the web about Gibson Battle to see if they were manufacturers or just suppliers/agents. There is a photo of there factory in Sydney in 1920s and that they were taken over by Tutt Bryant in 1961. Any more information on this company and there products (possibly photos) would be appreciated.
Neville
----- Original Message -----
From: richard horne
To: LRRSA@... <mailto:LRRSA%40yahoogroups.com.au>
Sent: Monday, November 15, 2010 5:39 AM
Subject: Re: [LRRSA] Kiama tramway

I have a note that this loco was in use at Kiama ex Avon Dam in1938 and derelict there in 1956. I also have a note that there was a standard gauge Gibson Battle loco of 1927, used on the quarry floor, derelict by 1936 and also extant in 1956.

I do not now know the source of this information, so advise that it be treated with a degree of caution, particularly the standard gauge loco and the dates associated with it. Corroboration or otherwise welcomed.

Richard Horne

--- On Sat, 13/11/10, Neville Conder <nconder@... <mailto:nconder%40internode.on.net> > wrote:

From: Neville Conder <nconder@... <mailto:nconder%40internode.on.net> >
Subject: [LRRSA] Kiama tramway
To: LRRSA@... <mailto:LRRSA%40yahoogroups.com.au>
Cc: LocoShed@... <mailto:LocoShed%40yahoogroups.com>
Date: Saturday, 13 November, 2010, 5:16

Afternoon all

Been visiting the local museum in Kiama today and have a query.

It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.

I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.

Any information would be appreciated.

Neville

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]


Re: Kiama tramway

neville conder
 

Thanks Richard for your reply on my query.
I have been searching the web about Gibson Battle to see if they were manufacturers or just suppliers/agents. There is a photo of there factory in Sydney in 1920s and that they were taken over by Tutt Bryant in 1961. Any more information on this company and there products (possibly photos) would be appreciated.
Neville

----- Original Message -----
From: richard horne
To: LRRSA@...
Sent: Monday, November 15, 2010 5:39 AM
Subject: Re: [LRRSA] Kiama tramway



I have a note that this loco was in use at Kiama ex Avon Dam in1938 and derelict there in 1956. I also have a note that there was a standard gauge Gibson Battle loco of 1927, used on the quarry floor, derelict by 1936 and also extant in 1956.

I do not now know the source of this information, so advise that it be treated with a degree of caution, particularly the standard gauge loco and the dates associated with it. Corroboration or otherwise welcomed.

Richard Horne

--- On Sat, 13/11/10, Neville Conder <nconder@...> wrote:

From: Neville Conder <nconder@...>
Subject: [LRRSA] Kiama tramway
To: LRRSA@...
Cc: LocoShed@...
Date: Saturday, 13 November, 2010, 5:16



Afternoon all

Been visiting the local museum in Kiama today and have a query.

It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.

I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.

Any information would be appreciated.

Neville

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


Re: ILRMS Tongarra Trainfest

Hunslet
 

I spent most of the day down there, in rather hot and humid conditions.

It was a most popular attraction with the general public, all internal parking having been taken by 1030 hours. A single entrance fee gave unlimited train rides throughout the day, with all three bogie passengers carriages in use.

As well as the Society's operating (2-ft-gauge and miniature) railway and stationary engine display, . there were displays from the NSW Police and State Emergency Services, Rural Fire Service, vintage cars, together with petrol and kerosene engines. The Society now has a separate "Ken McCarthy" shed containing historical displays and an operating narrow gauge model railway. The Railway Band made a special trip down from Sydney and performed frequently throughout the day.

Four 2-ft gauge locomotives were in steam and operating at various times throughout the day, with even the minute 0-4-0 box tank "Burra" running a demonstration train of four wheel skip wagons. Diesel locomotives were conspicuous by their absence, although the Simplex was on stand-by with the fire train.

I understand that this may be the last time that the "Perry" is steamed for a while as some repairs are needed to the smokebox area owing to rusting.

Very few railway "enthusiasts" made it to the site. The Museum had made special arrangements for any attending to be conducted to non-public areas in the bush in order to obtain photographs etc., away from the public - which was greatly appreciated by those who took advantage of this. During the morning, include when "Burra" made its demonstration runs, there were only two photographers; my mid afternoon, this had grown to no more than half a dozen, one of whom had made the journey from Stawell in Victoria.

My congratulations are extended to the Illawarra Light Railway Museum Society for an excellent Tongarra Trainfest - the first, so I understand for some five or six years.

Hunslet.


Re: Kiama tramway

rthorne475
 

I have a note that this loco was in use at Kiama ex Avon Dam in1938 and derelict there in 1956.  I also have a note that there was a standard gauge Gibson Battle loco of 1927, used on the quarry floor, derelict by 1936 and also extant in 1956.

I do not now know the source of this information, so advise that it be treated with a degree of caution, particularly the standard gauge loco and the dates associated with it.  Corroboration or otherwise welcomed.

Richard Horne

--- On Sat, 13/11/10, Neville Conder <nconder@...> wrote:

From: Neville Conder <nconder@...>
Subject: [LRRSA] Kiama tramway
To: LRRSA@...
Cc: LocoShed@...
Date: Saturday, 13 November, 2010, 5:16







 









Afternoon all

Been visiting the local museum in Kiama today and have a query.

It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.

I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.

Any information would be appreciated.

Neville



[Non-text portions of this message have been removed]


Re: ILRMS Tongarra Trainfest

halfpilotstaff
 

I had to miss it, as I was playing with CityRail trains.... :-(

--- In LRRSA@..., "Chris Stratton" <gm4201@...> wrote:

-----Original Message-----
From: LRRSA@... [mailto:LRRSA@...]
On Behalf Of oztrainz
Sent: Saturday, 13 November 2010 10:20 AM
To: LRRSA@...
Subject: [LRRSA] ILRMS Tongarra Trainfest

Hi all,
A reminder that the Illawarra Light Railway Museum Society will be holding
its
"Tongarra Trainfest" tommorrow, Sunday 14th November.
The day will feature all 4 of our operational steam locos on display in
steam &
in action hauling trains.
Unfortunately I won't be able to make it this year, it's my wife's birthday,
my daughter has a rehearsal for her end of year dance concert, and the
Wollongong Hawks are playing.

Regards,
CS


Kiama tramway

neville conder
 

Afternoon all
Been visiting the local museum in Kiama today and have a query.
It had a list of locomotives that worked on the tramway and the time they were there. A interesting one was as follows: 1927, Gibson Battle, petrol electric Ex Avon Dam, built in April 1921.
I thought I knew a lot about the tramway but this a new one for me. Does anyone have any information on this loco. Did it actual work on the tramway.
Any information would be appreciated.
Neville


Re: ILRMS Tongarra Trainfest

Chris Stratton
 

-----Original Message-----
From: LRRSA@... [mailto:LRRSA@...]
On Behalf Of oztrainz
Sent: Saturday, 13 November 2010 10:20 AM
To: LRRSA@...
Subject: [LRRSA] ILRMS Tongarra Trainfest

Hi all,
A reminder that the Illawarra Light Railway Museum Society will be holding
its
"Tongarra Trainfest" tommorrow, Sunday 14th November.
The day will feature all 4 of our operational steam locos on display in
steam &
in action hauling trains.
Unfortunately I won't be able to make it this year, it's my wife's birthday,
my daughter has a rehearsal for her end of year dance concert, and the
Wollongong Hawks are playing.

Regards,
CS