I think an On30 "Little Yarra" is a minor offence against the laws of nature. "Little Yarra" was quite a small loco and Baldwin certainly constructed inside framed locos of around this size for 2'6" gauge, although admittedly most that come to my mind were built a few decades before "Little Yarra".
toggle quoted messageShow quoted text
Reality is that an On30 model is most commercially viable, as this is by far the most popular scale/gauge combination for Aussie narrow gauge modelers. However a benelvent manufacturer would design his product to allow correct 3/4" gauge wheelsets if desired by the modeler.
Anyway, I would be fascinated to see photos of 6-14-C class locos in 2'6" guage if they ever do come to light.
----- Original Message -----
From: David Halfpenny [mailto:email@example.com]
Sent: 27/05/2008 6:50:09 PM
Subject: Re: [LRRSA] Re: Little Yarra
From: "Frank Stamford" <firstname.lastname@example.org>
Sent: Tuesday, May 27, 2008 4:58 AM
Subject: [LRRSA] Re: Little Yarra
Hello David,Thanks, Frank, that's what I guessed on all fronts.
Yes Brian is aware of the articles and drawings in the April "Narrow
Gauge Downunder" and "Light Railways". He actually approached us for
information in January, and he probably wrote to "Narrow Gauge and
Short Lines Gazette" at the same time.
Changing "Little Yarra" to 2 ft 6 in gauge is quite a radical
divergence from the prototype I think. Baldwin would probably have
used outside frames for 2 ft 6in gauge, though my efforts to find
photographs of any of the three 2 ft 6 in gauge 6-14-C class locos
have so far proved fruitless.
I think On30 is a hard disease to cure, simply because it is so expedient -
easy track, easy scenics, and with outside framed gear and wide treads,
nobody notices that the flanges are pushed in a whisker too far.
I'm feeling queasy about an On30 Little Yarra, but then it's not my scale.
Brian in his Gazette letter mentions "the Australian market" which implies
big ideas. It will be interesting to see how Australians vote with their