I started a blog to capture all the things I learn along the way building DRG #168. First relevant post is on design and fabrication of the frame: https://glenn.pulpitrock.net/blog/posts/2022-05-26_16

Could anyone in the group recommend anyone or another IO group of narrow gauge modelers involved in On3 gauge modeling. I have a small collection of O scale models for sale. I would greatly appreciate

Hi Again! I spoke to soon, before checking my stash of these couplers. It looks like I could only spare a few pairs. But, my offer still stands, except you would have to supply the unassembled coupler

Hello friends, All the Kadee talk has me curious...I switched to Sergent Engineering couplers quite a few years ago and out of the loop on Kadee's. A couple questions: (FYI, I did check the Kadee site

Hi Bob! We've had some eBay dealings in the past, and I've been a big admirer of your craftsmanship, especially the Kemtron C-16's which you have pictured and sold on eBay. I recently bought some 705'

I replied to groups but got failure to deliver mail. I tried the 705 couplers but the the screw hole is too small for the standard 1.4 mm screw (standard for brass imports) reaming the hole seems to i

Anyone out there steady enough to assemble them (the 714s) and sell them-? I've sprung my last spring ! thanks Bob Veefkind ---aching back in Pompano Beach the KD 705s don't work too well

I have a new Blackstone caboose that is lettered for Durango & Silverton. I am not sure why I purchased it as I have no intention in modeling the tourist stuff. Would any one be interested in trading

Good day all, I am helping a member of our club with repairs on his Blackstone K-27 locomotive which has a burned out motor. Does anyone have an old first gen motor that may have had the over-oiled pr

F.S. Weathered code 70 dual gauge track ( New ) bundles of six lengths, $30.00 each bundle interested? Send P.M. for more details George Nefstead

Last time I posted something on my project, I was messing with laser-cut metal frames. Well, I've vectored away from that and am experimenting with resin-printing the frame. Results look promising so

Hey group, I am wanting to add more lights to my Blackstone K-27s marker lights, fire box flicker and cab light. I am sure its been done before. My first question, does the locomotive pick up power fr

This is a reminder for the KCNG meet next month. If you have been putting off your registration, now is the time to get to it! Would like to see you all attend...it's a fun time!

I contacted TCS tech Support and the tech gave me several troubleshooting ideas…… the first was to lower the sound volume. I did and the issue of stalling/ balkiness disappeared. The speaker lost some

Has anyone had an issue with sound with their WOW Sound decoder. On my WSM C16, the engine runs smoothly w/o sound. As soon as I hit “8”, the engine runs erratically and finally will stop. It had been

I posted this on the "repower and regear group; Greetings, I just purchased a $50 GEM EBT locomotive that was sadly listed as a basket case. Based on the photos the biggest issue is that the valve gea

I just subscribed to this group. I did so because I have an unusual problem in my modeling that perhaps may find some relief here. I admit to very little familiarity with HOn3 products, so please forg

I have two Alishan Shay boxes. Not sure why I still had the boxes after selling the Shays from my store. I believe I have had these boxes since e 1978. The box is wood, with a black cardboard sleeve.

Here is a picture of my latest aqusitions. Some Kiso lumber company equipment. HO scale, 9mm track And now, for something completely different! The red coach is the mobile barber car. The speeder runs

Ken 12mm TT-scale track and power trucks are a good way to go... just fractionally under 42-inches in HO. In Europe... this is used to represent meter-gauge prototypes, i.e. HOm... but 3ft-6 is actual