Gone are the days of de-sprued brake wheels. I bet PSC used to have a punch to free these little, fragile parts. Here's my current method. I securely and carefully hold the part in my soft jawed vise.

I've been setting my grab irons out from the box car car sides using .030 x .060 styrene strip in various lengths for spacers. According to the chart on the Evergreen package that's 2 5/8 ". Does that

Hi Guys , I was heavily invested in PBL Sn3 when the DP HOn3 K-27's came out and didn't pay much attention to which versions they did at the time so I'm only aware of ones I saw for sale in the afterm

Hi! Burning Rio, a newbie here, looking for a Kemton C-16 Original kit. Over 40 years ago, I was building this kit, when I was offered a job at Precision Scale Company as a brass caster. I gave all my

I’m working thru a production run of Sn2 freight and passenger trucks using my Form3 SLA 3D printing system and was wondering if there is “market demand” for HOn3 printed trucks, primarily aimed at Ea

BLACKSTONE ENGINES W/Sound FOR SALE C-19s—non-weathered 343 Royal Gorge 346 Royal Gorge 347 Royal Gorge (green boiler) Unlettered $395.00 for the lettered, $375.00 for the unlettered. All have sound S

Good day gentlemen Looks like Grandt line brake parts for hon3 freight cars and tanks are no later available-or are they ? The tichy parts are okay but wish they were cast in black instead of grey. Th

I already have one of these weathered w new 705 couplers, so this one is surplus to my needs. Almost-new, test-run-only Blackstone C19 #345 in "Bumblebee"/ movie scheme paint, DCC w/ factory sound. Te

I have been making and using similar tools for about 30 years now, but using a lathe and mill to do so. Ric's photo shows a way forward for those of us who do not have lathes. Apologies for the length

I have only 12" between my middle and upper deck. The center shelf is 15" deep, while the upper shelf is 22" deep. With a 3" fascia, I can see the bottom half of two tortoise machines located near the

Turned this one from 3/16 “ brass stock. Cut the groove with my dremel cutoff wheel! I used the wheel set to determine the length! The one I purchased is way too long for the cbt truck frame! It is fi

The reboxx instructions says it stops cutting when its removed the excess material and arrived at the proper angle. So there must be something in the shape that stops the cutting. If it was just a dri

Does anyone have one or two LaBelle Florence and Cripple Creek coaches for sale or for trade for F&CC combines? Cliff Mestel

if so What did you use and what if your success like when using it. I am thinking of cutting down a micromark one from SG to NG lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097 -- lloyd lehrer

Hey Guys , Anyone have a DP Rio Grande 0540 in Flying Grande that might be excess to your needs ? If so , please drop a line - would like to buy one . Thanks, Bryan

This fine model is drilled for sound but I don't see a way to take the tender apart. Are my eyes that bad ?

That email address should include yahoo.com

Hey All.... I need to thin out my collection For Sale.... C&BT east broad top steel hoppers $30 each ...7 available Rail line D&RGW idler flats $15 each ....3 available F&C EBT 800 series Hoppers $20

After many years I am getting back into HOn3 and once settled into my new house, I can start on my first layout in over 30 years. The layout will be a one-man operation, with one train running at a ti

I Have the following HOn3 items for sale... Nathan Kline - HOn3 Model Trains For Sale: 9/20/20 Mfg. Type Description Qty. Price Ea. BSM C-19 NIB B310207-S Painted, Unlettered C-19, Later Version Flare