Date
1 - 20 of 25
San Juan Model Co. CONOCO tank cars
|
John Cytron
I got earlier this evening an email from San Juan Models as a pre-order customer that their Conoco HOn3 (and O Scale) tank cars were in. The public will get the notice in early November, so ordering now makes sure I get the tank cars I wanted. They are $89.95 apiece--yes expensive but as shown some weeks ago on Ken Patterson's What's Neat This Week video show, stunningly well made and decorated. Of course the real proof is in the pudding and I will see if the production models are as beautiful as the pre-production models. I should get mine in a couple of weeks. Web page is: https://sanjuanmodelco.com
John
|
|
|
|
dropframe46
Still less expensive than brass tank cars.
toggle quoted messageShow quoted text
Larry Olsen
On Oct 29, 2021, at 7:17 PM, John Cytron <rgsjohnny@...> wrote:
|
|
|
|
Got mine on order about 5 minutes after the email.
toggle quoted messageShow quoted text
Craig
On Oct 29, 2021, at 8:33 PM, dropframe46 <dd830tm2@...> wrote:
|
|
|
|
Mike Chamberlain
Ordered 4 last night , still cheaper than Blackstone ! Never thought I would pay this much for a car though . I shudder to think what the BS K28 and K36 will cost .
|
|
|
|
If we ever see them Mike.
toggle quoted messageShow quoted text
I sure hope I am wrong…but every time I discuss the engines/reruns with them…they keep saying they need to go over and inspect the molds. And with Covid they indicated it would be a while. Back on the San Juan cars..they look great. I’m OK paying a bit more for higher quality. Has anyone heard of they will be offering kit form? Craig
On Oct 30, 2021, at 8:28 AM, Mike Chamberlain <mikec6201@...> wrote:
|
|
|
|
Ric Case
Does anyone know what the rolling quality of the trucks might be!
toggle quoted messageShow quoted text
I am spoiled with the Blackstone trucks! Ric Case EBT Modeler Hamilton Ohio 1-513-375-7694
On Oct 30, 2021, at 10:46 AM, Craig Linn <drgw346@...> wrote:
|
|
|
|
Bill M
Hi All
toggle quoted messageShow quoted text
I can chime in here on this. They are most definitely in Denver. Seen the pix and Doug is a best friend. As for kits thereof, no plans at this time. Lastly, I can also attest to the amazing quality of the cars. The castings are superb. Bill
|
|
|
|
Dale Buxton <dbtuathaddana@...>
The sample I saw two years ago rolled very freely. F.Y.I. The story goes that the trucks these cars rode on came from the scrapped Ingoldsby Coal gons. The story also goes that Kadee 4' 8" trucks were based on the Ingoldsby cars trucks. All of my Division Point CONOCO Tall Dome Tank Cars ride on these trucks and they roll GREAT! So if you decide you don't like the San Juan trucks (which I totally doubt you will), you have a second excellent choice to go to. Dale
On Sat, Oct 30, 2021 at 8:50 AM Ric Case <ebtmodeler@...> wrote:
|
|
|
|
Dale Buxton <dbtuathaddana@...>
My information was 30 days old and my email notice from San Juan arrived late last night. My cars are ordered now though. Dale
Hi All
|
|
|
|
bassb04011
These things are beautiful. SJ really did a good job.
toggle quoted messageShow quoted text
I grabbed two On3 and one HOn3. Can’t wait to get them in hand.
Brian
On Oct 30, 2021, at 11:32 AM, Dale Buxton <dbtuathaddana@...> wrote:
|
|
|
|
martin feldwick
These will be way too expensive for me over here in the UK but they look fine models .The Blackstone locos look like they are made by Kader so maybe they will take it all over like in the UK where Bachmann who are noted for good quality scale models in the UK,not lower end stuff, released previously private commisions under the EFE label .I probably wont be able to afford them but I do have brass to while away the hours and lots of kits to keep me quiet . Martin
|
|
|
|
Mark Lewis
All: I saw production samples of the HOn3 CONOCO Tank Cars, at the 2021 NNGC in Hickory, NC, back in early September. They looked amazing! Looking forward to receiving my order of Tank Cars. Mark Lewis Narrow gauge modeling in N.C.
On Sat, Oct 30, 2021 at 11:46 AM bassb04011 <fishingmaine@...> wrote:
|
|
|
|
Rio Grande
I did pre order some as well, but unfortunately they are not in my current budget. They do look great tho.
|
|
|
|
Mike Chamberlain
I just paid for my 4 yesterday . Guessing I will have them next week .......Mike
|
|
|
|
At this point, though, I would rather pay quite a bit more than not having those models at all.
Robert Furrer
Von: HOn3@groups.io <HOn3@groups.io> im Auftrag von Mike Chamberlain <mikec6201@...>
Gesendet: Samstag, 30. Oktober 2021 14:28 An: HOn3@groups.io <HOn3@groups.io> Betreff: Re: [HOn3] San Juan Model Co. CONOCO tank cars .... , still cheaper than Blackstone ! Never thought I would pay this much for a car though . I shudder to think what the BS K28 and K36 will cost .
|
|
|
|
Overseas postage definitely is very steep. I ordered mine to be shipped to Chicago. Means I will have to wait till summer though when my son comes for a visit.
Robert
Von: HOn3@groups.io <HOn3@groups.io> im Auftrag von martin feldwick <trackpass@...>
Gesendet: Samstag, 30. Oktober 2021 15:51 An: HOn3@groups.io <HOn3@groups.io> Betreff: Re: [HOn3] San Juan Model Co. CONOCO tank cars These will be way too expensive for me over here in the UK but they look fine models .....................
Martin
|
|
|
|
Yeah I had to send mine through my mail-forwarding service in Florida. (It’s not cheap either, but about 1/3 of what UPS was charging.)
|
|
|
|
alsands@...
Approx $au166.00 each, a tad too expensive, poor exchange rate and overpriced postage
|
|
|
|
Mike Conder
I assume you are calculating AU$120 for the model and AU$46 for shipping? That sounds about right, unfortunately. But maybe a bunch of you could join together and get several models all shipped together, that should cut down on shipping cost per model. Mike Conder
On Sat, Oct 30, 2021 at 6:12 PM <alsands@...> wrote: Approx $au166.00 each, a tad too expensive, poor exchange rate and overpriced postage --
Mike Conder
|
|
|
|
alsands@...
Mike, not too many HOn3 modelers in Western Australia, don't even have ant full service Train Stores
|
|
|