Date   
Re: priming F.U.D.

Mike Conder
 

I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder

On Mon, Jan 14, 2019 at 3:56 PM kevin b via Groups.Io <arcatruck13=yahoo.com@groups.io> wrote:
to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: priming F.U.D.

Mike Conder
 

I meant, " ... painting a red boxcar or something..."

Darn autocorrect.

Mike Conder

On Mon, Jan 14, 2019 at 7:57 PM Mike Conder <vulturenest1@...> wrote:
I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder

On Mon, Jan 14, 2019 at 3:56 PM kevin b via Groups.Io <arcatruck13=yahoo.com@groups.io> wrote:
to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: priming F.U.D.

kevin b
 

thank you sir.
that's exactly what I needed to know.

have a happy day.
Kevin.


 

I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder


Re: NG truck identification

Mike Conder
 

Thanks Sam, I knew I read wrong but just couldn't come up with the name and knew you'd eventually help me get it right!

Mike Conder

On Mon, Jan 14, 2019 at 5:24 PM James Bass <tinticng2@...> wrote:
Eureka Hill RR, Mike.

Sam Bass

Re: C&NW NG truck identification

roundbell@...
 

There is a C & NW (Wisconsin ) N G box car on display in a S G gon at the Duluth RR Mus. (Quite nice with a Mc Giffert log loader as a bonus. Didn't look to see if it had trucks.    Wayne Weiss



-----Original Message-----
From: tonyk537 via Groups.Io <Tonyk375@...>
To: HOn3 <HOn3@groups.io>
Sent: Wed, Jan 9, 2019 2:42 am
Subject: Re: [HOn3] NG truck identification

On Mon, Jan 7, 2019 at 09:32 PM, Randy Hees wrote:
Was going to ask if the A&NM 2nd hand flat cars from the C&NW lines in the Black hills or Wisconsin.  But doubled checked the Narrow Gauge discussion group and a 2009 posting from Dave Grandt said they were most likely from Wisconsin.

Re: C&NW NG truck identification

Ken Martin
 


On Jan 14, 2019, at 9:43 PM, roundbell via Groups.Io <roundbell@...> wrote:

There is a C & NW (Wisconsin ) N G box car on display in a S G gon at the Duluth RR Mus. (Quite nice with a Mc Giffert log loader as a bonus. Didn't look to see if it had trucks.    Wayne Weiss



That is a Milwaukee car, I was told the name of the Original road but have forgotten it

There is a C&NW ng boxcar #10 at the Mid-Continent RR museum near Baraboo, WI. However it sits on Belvue and Cascade trucks.

Ken Martin

Re: C&NW NG truck identification

Mike Conder
 

Thanks for the info.

But after reading the RR of Az Vol 3 book (per the earlier recommendation) I think I need info on a Lichtfield car design circa 1883 or so.  (Amazing how much one forgets about a book read cover-to-conver over 30 years ago!).

Haven't checked out the Gazette or other magazine indices, that's the next step.

Mike Conder

On Mon, Jan 14, 2019 at 11:15 PM Ken Martin <kmartin537@...> wrote:

On Jan 14, 2019, at 9:43 PM, roundbell via Groups.Io <roundbell@...> wrote:

There is a C & NW (Wisconsin ) N G box car on display in a S G gon at the Duluth RR Mus. (Quite nice with a Mc Giffert log loader as a bonus. Didn't look to see if it had trucks.    Wayne Weiss



That is a Milwaukee car, I was told the name of the Original road but have forgotten it

There is a C&NW ng boxcar #10 at the Mid-Continent RR museum near Baraboo, WI. However it sits on Belvue and Cascade trucks.

Ken Martin

No luck at all lately

Paul Sturtz
 

My sweet running Westside Models HOn3 Heisler #3 quit running all of a sudden.  Some wires connecting the commutator to the windings broke  (have I got that right?).  Checked Loco Doc, nothing listed for this model.  Any suggestions?
Paul

Re: No luck at all lately

Richard Johnson
 

The shay fixer replaced my motor with a can and a new bracket and used fuel line tubing.
Ran great afterward.  I have not run it in a decade.
Rich Johnson

www.RichardSJohnson.net

"Those who enjoy freedom must endeavor to preserve it."


"No free man shall ever be debarred the use of arms"
Thomas Jefferson


From: HOn3@groups.io <HOn3@groups.io> on behalf of Paul Sturtz <apa_208@...>
Sent: Tuesday, January 15, 2019 1:23:36 PM
To: HOn3@groups.io
Subject: [HOn3] No luck at all lately
 
My sweet running Westside Models HOn3 Heisler #3 quit running all of a sudden.  Some wires connecting the commutator to the windings broke  (have I got that right?).  Checked Loco Doc, nothing listed for this model.  Any suggestions?
Paul

Re: No luck at all lately

kevin b
 


 

My sweet running Westside Models HOn3 Heisler #3 quit running all of a sudden.  Some wires connecting the commutator to the windings broke  (have I got that right?).  Checked Loco Doc, nothing listed for this model.  Any suggestions?
Paul

sounds to me like at least 1 of the wires (windings) on one of the poles of the armature has either broken or come unsoldered.
this is a fairly simple fix, IF you can get to it.
you may have to remove the motor etc.ect.ect.
if there is enough wire to re-solder it to it's proper place, you're done already.
if it's broken, unwind 1 "wind" of the wire, then solder it back to it's proper place.
done.

when i was a kid, I was forever rewinding the armatures (commutators) on my slot cars.
fewer wraps of wire meant they'd run faster...….

Kevin.


Re: No luck at all lately

Climax@...
 

I can vouch for him too.  He does excellent work but you get the best and pay for it too.

-----Original Message-----
From: Richard Johnson
Sent: Jan 15, 2019 4:51 PM
To: "HOn3@groups.io"
Subject: Re: [HOn3] No luck at all lately

The shay fixer replaced my motor with a can and a new bracket and used fuel line tubing.
Ran great afterward.  I have not run it in a decade.
Rich Johnson

www.RichardSJohnson.net

"Those who enjoy freedom must endeavor to preserve it."


"No free man shall ever be debarred the use of arms"
Thomas Jefferson

From: HOn3@groups.io <HOn3@groups.io> on behalf of Paul Sturtz <apa_208@...>
Sent: Tuesday, January 15, 2019 1:23:36 PM
To: HOn3@groups.io
Subject: [HOn3] No luck at all lately
 
My sweet running Westside Models HOn3 Heisler #3 quit running all of a sudden.  Some wires connecting the commutator to the windings broke  (have I got that right?).  Checked Loco Doc, nothing listed for this model.  Any suggestions?
Paul

Gunnison Parlor Car Project

Dusty
 

Mounted Blackstone trucks at 'base' height. No filing or washers. Determined from the Grandt book that top of coupler is SLIGHTLY below the end beam/buffer plate. Using .040 styrene on top of the 714 box I matched Kadee Gauge height and positioned the coupler in good relationship to the end beam. I'm going to assemble and mount the box on the shim upside down to expose the tabs for 'melt' welding later. My OCD kicked in so I decided to drill a hole in the shim for a piece of styrene rod that fits the hole in the 714 box. I use the 714 box as an alignment gluing guide because it won't adhere to the Dichloroethane, I hope.

While they are hardening I'll try to figure out how to add the buffer plate.

Dusty Burman 

39th and last!

Paul Sturtz
 

Just finished my 39th HOn3 diesel conversion, a GE demonstrator that can fit any narrow gauge layout from 1946 on.
Paul

Re: 39th and last!

Russ Norris
 

Nice.  Do you use them all or sell them?

Russ Norris

On Wed, Jan 16, 2019 at 8:10 PM Paul Sturtz <apa_208@...> wrote:
Just finished my 39th HOn3 diesel conversion, a GE demonstrator that can fit any narrow gauge layout from 1946 on.
Paul

Re: Gunnison Parlor Car Project

Dusty
 




 I ACC'd 714 box to styrene shim. I assembled the 714 coupler. I 'welded' the virtually unglueable engineering plastic with an Opthalmolic Cautery tool. Similar tools are fly tying line cutters, veterinary cautery, skin care cautery and wax carver pens. Probably others?

I still haven't finalized the buffer plate/diaphragm thing to resolve coupler location.

Forgive the murky image. Color, lighting and phone camera aren't the optimal combination for my limited image capture skill set.

Dusty Burman

Re: 39th and last!

Paul Sturtz
 

Sold 36, regularly use two sound equipped and am considering adding sound to the new one.  Old beat-up industrial boxcab #18 is regular power on log trains.

Re: 39th and last!

Mark Lewis
 

Paul:

Love the box cab! 

Mark Lewis 
Stony Point, NC 

Crossing Pogue Bridge

Russ Norris
 

A mile south of Orbisonia, the East Broad Top crosses Aughwick Creek on its longest bridge.  The bridge is composed of a pair of 105 foot Pratt deck girder truss sections and a deck girder bridge.  It still stands, although today the track and ties have all been removed and the stone piers supporting it are in dire condition.  But in the summer of 1950 Hallmark brass 2-8-2 number 18 hauls a string of empty hoppers south to the coal mines beyond Robertsdale.  I build the bridge from two Walthers Pratt deck truss kits and a Micro Engineering deck girder bridge.  You can see the train rumble over the bridge above some fly fishermen looking for trout in the Aughwick at this site:

https://youtu.be/KY5kbxaZ1K4

Russ Norris

Re: 39th and last!

tonyk537
 

They look great Paul !

How I Built the Bridge

Russ Norris
 

Just finished a post on my blog detailing how I built and scenicked the EBT's Pogue bridge.  Complete post is available at this link:  http://blacklogvalleyrailroad.blogspot.com/

Russ Norris