Ric, Are you looking to print a similar truck using them as a guide, or just want some to go with the printed cars? Bruce Bowie

Some to mount Ric Case EBT Modeler Hamilton Ohio 1-513-375-7694

Hi Guys. I asked the crew at MRH to ask about the K-36 and K-28 project. Below is the response from that post. ======== Sun, 2019-07-14 19:22 — JeffShultz I got the distinct feeling that the

What about new Kadee #726 Vulcan trucks? Saw in Gazette. Bruce Dunlevy

David; I politely beg to differ. The 714 box is not 20/64. it is 5/32 + 15/64 = 25/64. And it may be longer as the measurement seems to be on the contact surface rather than the face of the

Blackstone said they expect to have the 2nd run Reefers in the warehouse by the end of August. Chris Lane - Editor HOn3 Annual chrislaneon30@...

Bruce Ihave ten pair, Ian pleased with the looks but using them cut my train length by 1 to 2 cars depending on the caboose on the tail end. I am running black stone C-19s for road power ! My normal

I believe the best way to address this is when they become available I will need to purchase and install them on a few cars then mix them up and review the facts in real time. Ric Ric Case EBT

Ric: Kadee 705's are available now, from Kadee....I placed an order Friday, and they should be delivered in a couple of days. Mark Lewis

Mark yes I ordered ten pair on Monday myself. Ric Case EBT Modeler Hamilton Ohio 1-513-375-7694

Mark with 200 cars on the railroad it will be curious to see how much trouble will show up during operation sessions. Ric Case EBT Modeler Hamilton Ohio 1-513-375-7694

When I first heard about the 705 I figured it would be the standard guage coupler with a short pin. This appears to be 1/32 shorter. Dusty Burman

Travis Handshug (sp?) already had some and posted on one of the HOn3 Facebook lists. Apparently, (1) they drop right into Blackstone cars, (2) they extend out a bit more than 714's, (3) they couple

Dale, You're right. It is a Blackstone car but the trucks! The trucks threw me as they are of extraterrestial origin. No brakes, arches are thicker and the mounting screws are interesting. For an

Mike all very well BUT do they bounce..... Mark K

Dammit, for extraterrestial read KaDee trucks. Mark K

Mark, The trucks are one of the 6 new types of trucks that Kadee released last year. They are all scaled down versions of standard gauge trucks made of a high density injection molded plastic. The

How many here still know the wag of that tale? Dale B

Excellent Dale. Yes I suddenly came out of my age induced stupor and realised what they were. I also suddenly remembered that my good friend Mike Conder had slipped me a set which I had forgotten

Just as reference, I put "Bullfrog Snot" on the rear set of drivers only. Thinned it out for "N" gauge use and went at it. Vastly improved tonnage ratings for the C-19's. Went from barely pulling