Date   
Want to buy a locobuffer USB.

lloyd lehrer
 

Reply with price and condition to;

lloydlehrer@...

lloyd lehrer, (310)951-9097

--
lloyd lehrer

HOn3 Locomotives and rolling stock for sale revised list 12

Brinton Jones
 

                                                     

                             ALL BLACKSTONE ARE IN ORIGINAL BOXES

BLACKSTONE LOCOMOTIVES

D&RGW NO 462 K27 2-8-2 Royal Gorge herald green boiler P.N. B310105-S $350.00 Plus shipping

D&RG NO 345 C19 2-8-0 MOVIE SCHEME P.N. B310208-S ORANGE & SILVER, $360.00 Plus shipping

All locos have about two hours run time.

Most Blackstone cars are new never run

30’ BOX CARS

D&RGW 30’ Box car Flying Grande herald NO 3468 P.N. B34018 ORANGE CAR SILVER TOP $55.00 Plus shipping

D&RGW 30’ REEFERS

D&RGW 30’ Reefer Royal Gorge Rout herald NO 43 P.N. 340808 $55.00 Plus shipping

D&RGW 30’ FLAT CAR

D&RGW 30’ Flat car Weathered D&RGW NO 6057 P.N.340310W  $35.00ea Plus shipping

UNBUILT KITS

PRECISION SCALE D&RGW 30’ REEFER Plastic kit w brass trucks $20.00 Plus shipping

GRANDT LINE D&RGW 30’ Flat car Hon3 KIT #5186 $20.00 Plus shipping

Campbell #357Coaling Station $45.00 Plus shipping

Campbell #404 Quincy Traveling crane $20.00 Plus shipping

PHOTOS ON REQUEST

NO PAYPAL

Check or USPS Money Order only

BRINTON JONES    

bmrjones@...

30993 HUNTWOOD AVE # 206

HAYWARD CA 94544-7000

Re: HO EBT Machine Shop Kit Progress Pics

Bruce
 

It is looking GREAT!  I'm very excited to receive my pre-ordered kit but will wait until you have them ready.  

With cinders in your eyes,
Bruce Bowie
419-602-3584
in2trains@...

On Mon, Dec 30, 2019, 12:50 PM NarrowMinded1 <nathan.kline83@...> wrote:
Here are the latest progress pics of the interior framing and exterior tank from the laser cutting company. Enjoy!

Nathan Kline
www.nateslightironhobbies.com
www.broadtopmountainmodels.com

Re: HO EBT Machine Shop Kit Progress Pics

Mark Lewis
 

Wow....massive!  Looks great, so far.

Mark Lewis 



On Mon, Dec 30, 2019, 12:50 PM NarrowMinded1 <nathan.kline83@...> wrote:
Here are the latest progress pics of the interior framing and exterior tank from the laser cutting company. Enjoy!

Nathan Kline
www.nateslightironhobbies.com
www.broadtopmountainmodels.com

Re: Rio Grande Models status?

Mark Lewis
 

If "CLOSED" is not the case at Rio Grande Models, it being printed across the main page of their website,  is ominous...at best. 

Eric might want to send out an explanation. 

Mark Lewis 

On Mon, Dec 30, 2019, 1:05 PM Dusty <Dustburm@q.com> wrote:
I just received an email response to my shipping question from RGM so maybe nothing unusual is going on.

Dusty Burman 
623 261-8707

Re: Rio Grande Models status?

Dusty
 

I just received an email response to my shipping question from RGM so maybe nothing unusual is going on.

Dusty Burman 
623 261-8707

Re: Rio Grande Models status?

tonyk537
 

That is new. Don't know when the CLOSED was posted on his site as I have the information printed out as with the order form. Hope its not permanent.  
Eric filled an order for me that I received 10 days ago.  

HO EBT Machine Shop Kit Progress Pics

NarrowMinded1
 

Here are the latest progress pics of the interior framing and exterior tank from the laser cutting company. Enjoy!

Nathan Kline
www.nateslightironhobbies.com
www.broadtopmountainmodels.com

Re: Rio Grande Models status?

Climax@...
 


Probably closed for the holidays.

-----Original Message-----
From: Dusty
Sent: Dec 30, 2019 10:17 AM
To: HOn3@groups.io
Subject: [HOn3] Rio Grande Models status?

Went to print order form and saw 'CLOSED' in big letters on their home page. Called Coronado and Sheldon said he was at their Web Site yesterday and didn't recall seeing 'CLOSED'. Anyone know what's  happening? Hope all is well.

Dusty Burman 
623 261-8707

Re: Rio Grande Models status?

bassb04011
 

Sad day. Figured at some point Eric would shut down. 
Hope someone can pick up the line and continue his legacy.
Brian 


On Dec 30, 2019, at 10:17 AM, Dusty <dustburm@q.com> wrote:

Went to print order form and saw 'CLOSED' in big letters on their home page. Called Coronado and Sheldon said he was at their Web Site yesterday and didn't recall seeing 'CLOSED'. Anyone know what's  happening? Hope all is well.

Dusty Burman 
623 261-8707

Re: Rio Grande Models status?

Mark Lewis
 

Dusty:

I went on their website, earlier today and saw the same big red CLOSED message.

This is NOT good......

Mark Lewis
narrow gauge modeling in N.C.


On Mon, Dec 30, 2019 at 10:17 AM Dusty <Dustburm@q.com> wrote:
Went to print order form and saw 'CLOSED' in big letters on their home page. Called Coronado and Sheldon said he was at their Web Site yesterday and didn't recall seeing 'CLOSED'. Anyone know what's  happening? Hope all is well.

Dusty Burman 
623 261-8707

Rio Grande Models status?

Dusty
 

Went to print order form and saw 'CLOSED' in big letters on their home page. Called Coronado and Sheldon said he was at their Web Site yesterday and didn't recall seeing 'CLOSED'. Anyone know what's  happening? Hope all is well.

Dusty Burman 
623 261-8707

Re: DRG Thielsen 4000 Series Box Car Trucks

Dusty
 

I'm going to try to get a couple pairs of Rio Grande 27' trucks ordered today. Even if they aren't convertable to Theilsens they will probably 'do' for stand in work car trucks.

Dusty Burman 

Re: DRG Thielsen 4000 Series Box Car Trucks

Dale Buxton
 

I agree with Tony on the early C- class tender trucks. But these tender trucks are 4’ wheel base. Though, the extra 5” of truck length is hardly noticeable in HO scale while under a car. Unless maybe your truck bolster spacing from the end of the car frame would prohibit these trucks. One again a thin piece of styrene with about a half width hole in it to cover the springs and you’ve got a close facsimile D&RG 20 ton truck side frame.

Dale B.

Lights in the crossing flangeways.....

Brian Kopp
 

So which one of you has added lights to the flangeways in the crossings on their narrow gauge layouts like the Tweetie has? =) Rode #12 with the family tonight for their last Christmas special event. What fun! Here is my cellphone video of #12 making her first entrance of the evening......   
https://youtu.be/c9koZsOVPNA

--
Brian Kopp
Jacksonville, FL

Re: DRG Thielsen 4000 Series Box Car Trucks

tonyk537
 

In HOn3 I would use a Rio Grande Models 20 ton D&RG truck and insert a styrene cover with the hole in it.  Or do the same thing with a PSC old style D&RGW tender truck. The tender truck would be a bit heavy on the 4100 cars that had that style of truck.

3223
D&RG 3'7", 20 ton, 27 foot box cars.
http://www.riograndemodels.com/HO.htm

Tony Kassin
 

Re: HO EBT Machine Shop kit update

Mike Conder
 

Thanks Nathan!

Mike Conder


On Sat, Dec 28, 2019 at 10:48 AM NarrowMinded1 <nathan.kline83@...> wrote:
Hi Mike,

The car shop will be the next kit and ahould be available shortly after the machine shop. I am on vacation and will post pictures of the machine shop progress when I get back by January 3rd.

Nathan

Re: HO EBT Machine Shop kit update

NarrowMinded1
 

Hi Mike,

The car shop will be the next kit and ahould be available shortly after the machine shop. I am on vacation and will post pictures of the machine shop progress when I get back by January 3rd.

Nathan

DRG Thielsen 4000 Series Box Car Trucks

Dusty
 

Based on photos in Steve Swanson's work equipment book and Robert Grandt's Numbered work equipment book I am compelled to ( attempt to) put Thielsen trucks under at least one 4000 car. I have played the Google Game to the best of my ability to find a suitable truck in Hon3 with no success. This truck is flatter across the top than the SP Thielsen. A distinctive feature is a hole in the end of the bolster(?). I saw a photo with the caption containing 'cast transom'. Ozark minitures appears to have the truck I am looking for but 4 times the size. Anyone have a solution for the correct truck or a suitable modification for a 'stand in'? I'm not looking for a Smithsonian stand in, more like a bit of visual deception.

Dusty Burman
623 261-8707 

Re: PCMRC lost its room - DCC and NWSL items for sale

Russ Norris
 

Bruce, what locomotives do you have?  Any Pennsy equipment?


On Fri, Dec 27, 2019, 7:38 PM Bruce Petrarca via Groups.Io <bfpetrarca=icloud.com@groups.io> wrote:
I’m sending this to private model railroading lists that I have and groups on Groups.IO that allow “for sale” postings. Please forgive me if you get multiple copies. I’m trying to do the best job I can for our members and get the word shared as quickly and as widely as possible.

The PebbleCreek Model Railroad Club (PCMRC.ORG) has lost its room and must liquidate all its assets as quickly as possible. We have sold a lot of buildings, rolling stock, etc. at local swap meets. However, we still have some DCC equipment (used) and a bunch of HO NWSL wheels and gears (brand new) for sale.

Attached is the current list in PDF format.

On my website (http://mrdccu.com/for-sale.html) is a link to the PDF file, which will be updated from time to time, as things sell.

We also have some HO locomotives, many with sound, and freight cars for sale that are not listed in the PDF. Also, we have two garden loco cars (USA Trains: UP wood chip with load and a Garden Railroad convention tank; both with Kadee body mount couplers) that are not listed. Contact me for more information on these.

The first page of the PDF has the terms and conditions and methodologies for this sale.
Bruce Petrarca
mrdccu@... is the eMail address for this sale.



--
Russ Norris, MMR
Cape Cod, Massachusetts
http://blacklogvalleyrailroad.blogspot.com/