Mark, Steam era 1920s - early 40s would work for me. BTW are you going to the convention in Charlotte? Thank you Eric

Fairly new are these figures from the UK https://www.modelu3d.co.uk/product-category/north-american/ Might be too modern though Greetings Martin

Eric, What era/time period of 1:87 figures are you looking for? Mark Lewis Narrow gauge modeling in N.C.

Likely a little too uniquely Australian … but the HO figure selection at Andian Models are pretty good. And the Aussie Dollar cheap. https://www.andianmodels.com/ho-figures-selection-page Phil

Good Morning, I am looking for HO scale figures. I have looked at Woodland Scenic, and others at Walthers, but there does not seem to be a good selection of RR workers. Any information would

On Thu, Sep 29, 2022 at 11:16 PM, Mike Conder wrote: Not sure if this helps, but Eric Xing is working on the Sharon coupler and may even have them available already. I plan to get LOTS! Mike

Not sure if this helps, but Eric Xing is working on the Sharon coupler and may even have them available already. I plan to get LOTS! Mike Conder

Why don't HOn3 modelers use the Kadee 148 coupler?, I was thinking about using them but have decided to get out of narrow gauge, it's just too hard to get anything when you live in Australia so I will

The D&RGW largely used Full Sized Sharon MCB couplers on its narrow gauge equipment. There were other manufacturers of MCB full sized couplers including Climax, Tower, La Trobe, and Janney. The AAR

What type of couplers did the D&RGW and the RGS use on their cars? The reason I'm asking is that my intent was to use Sergent Engineering "Sharon" type coupler for the rolling stock on my layout,

Hey Dave, I did some 3D models of the 4 wheel cars and initially had a 3D printed link and pin coupler that worked quite well, although it was incredibly tiny and not very conducive to operations. But

Wayne, Just a thought....You would probably get much more interest in these 2 locomotives, if you posted a number of photos of them, out of the box/foam cradles and show the bottoms of each

FOR SALE - two K-27’s. Foam and boxes in good condition – loco’s never run – both NIB – no wheel wear Type Number Finished Model

Thanks Bill for looking. I too did not see anything. I think my buddy is correct. I probably got the last set I used from W&R, when they were selling parts. I’m contacting other importers to see

I looked at Cal-Scale on www.bowser-trains.com and didn't see any without lights attached. Bill Lugg

JC You might try Wiseman's old brass parts. John Stutz

Mike, I have no clue. A buddy suggested they are W&R brackets. They did import Heavyweight NP passenger cars. Ho is HO

Cal-Scale? Mike Conder

I bought part number 2881, but that’s not it.

JC, Also in the PSC HO Steam Catalog, is part number 32550, tender marker light bracket, f that helps. Bill Lugg