Date   
Re: Calling all builders!

 

On the subject of fingers --- In one of my engineering jobs I was responsible for a small workshop that the engineers and techs could use.  It had a floor standing drill press.  My simple rule on work holding was do not put your finger closer to the turning drill than the length of the drill bit.

Re: Calling all builders!

 

On the  subject of power tools, has anyone here gotten familiar with any of the new breed of portable band saws?  I want something for the hobby room that I can set up with a good 24 tooth Lenox bimetal blade.  Before I get too deep into inventing a solid benchtop mount for the thing I'd like to hear from anyone who has looked in this direction.  Anyone have links to pics or drawings of shop built table top structures for semi-permanent fixed mounting of one of these portable saws?  I know that Milwaukee has a $400 collapsible "job site" saw mounting rig; but it's huge and a bit pricey.   I want to experiment and if that type of saw turns out unsuitable for hobby work it can still "hang out" in my cold welding shop for cutting stuff that is too big for my old 4x6 cutoff saw.  EdW in Los Gatos, CA

Re: Calling all builders!

George Saridakis
 

Hi Dusty,

I have the Byrne table saw, thickness sander, disk sander, and the Proxonn mini chop saw.

I am very happy with all of these tools and would recommend them.

George

Re: Calling all builders!

Mike Van Hove
 

Rich, Thanks for the info.

Mike

On Feb 22, 2020, at 9:37 AM, richrands <rands00@...> wrote:

Mike,
Pete Smith has Tom's saw and swears by it. One of these days I plan on buying one myself.
Rich Rands

Re: Ore Wagon - HO

Mark Lewis
 

Rich:

What an amazing looking model!  This will be a great addition to your line-up of HO scale wood wagons.

Mark Lewis
Narrow gauge modeling in N.C.


On Sat, Feb 22, 2020 at 10:39 AM richrands <rands00@...> wrote:
The second wagon we have just released in HO scale. The #2101 Ore Wagon is modeled after an important wagon used for hauling ore from back country mines to the railhead. It is a laser cut wood and white metal kit. Detailed instructions with photos included.

https://www.berkshirevalleymodels.com/apps/webstore/products/category/1558878?page=1

Re: Calling all builders!

Glenn
 

I can attest to the blood part, 21 stitches in my right thumb. I don't remember how many in my index finger. Both from my Dremel. Today I cannot use a smart phone as there is a tunnel down the middle of the finger where the stitches went.

I bought my Dremel in 1979 just after they came out. I use it all the time. since it's purchase I have acquired saw blade stabilizers, fine tooth blades, and  a saw sled,

I purchased the sled for a seller on eBay, it greatly improves the saws performance and utility.

I mounted the saw om a square of plywood and clamp that to my work bench when I need it. I store the saw in the knee hole of my work bench.

For those safety conscious ones. All my small power tools are mounted on bits of plywood that have bolts through them that drop into holes drilled in the bench top. This keeps them from wandering around if the clamps vibrate loose.

Glenn



-----Original Message-----
From: Climax@...
Sent: Feb 21, 2020 11:33 AM
To: HOn3@groups.io
Subject: Re: [HOn3] Calling all builders!

Any of those will draw blood in an instant, and separate a digit from your hand leaving you with only 9! 
Dave


Ore Wagon - HO

richrands
 

The second wagon we have just released in HO scale. The #2101 Ore Wagon is modeled after an important wagon used for hauling ore from back country mines to the railhead. It is a laser cut wood and white metal kit. Detailed instructions with photos included.

https://www.berkshirevalleymodels.com/apps/webstore/products/category/1558878?page=1

Re: Calling all builders!

richrands
 

Mike,
Pete Smith has Tom's saw and swears by it. One of these days I plan on buying one myself.
Rich Rands

Re: Calling all builders!

Dusty
 

Thank you everyone for your input.

I have used the Dremel saw and the larger Jarmac. I have used a couple of Chinese Came saws as well. I've been underwhelmed by the Chinese saws. For quickie cuts or rough cuts I use the Dremel. It works and its powerful. I use the Jarmac for more important work. I have no exposure to the Proxxon saw.

The Byrnes sliding table and the rip taper guage look very useful. The tilting table looks limiting in some aspects but better than a tilting arbor in others.

I have survived the last 20 years without a Byrnes saw but they appear to be very capable. Maybe it's a potentially expensive case of tool 'lust'.

Dusty Burman 

Re: Calling all builders!

Jeff Young
 

I have a Byrnes disc sander.  There is a world of difference between it and a Dremel, Jarmac, Proxxon, etc.  It’s built to much tighter tolerances, and as such can deliver much tighter tolerances to the work being performed.

On 21 Feb 2020, at 16:48, Michael Dunn <mdunn@...> wrote:

I can't speak to Dremel or Jarmac, however I am very happy with every product I have purchased from Byrnes, including Jim's table saw.

The machining and construction are visually impeccable, but more importantly; it is a solid tool that gives repeatable results at a very fine scale.

Between the saw and Jim's thickness sander, I have not purchased a piece of dimensional lumber in 8 years - other than a 4"x6"x18" block of basswood!

I'm not aware of an instance where the extra money for one of Jim's saws was ever regretted. His rope walk is as much an art piece as a tool.

M


On Feb 21, 2020, at 10:47 AM, Dusty <Dustburm@q.com> wrote:

Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Re: Calling all builders!

Michael Dunn
 

I can't speak to Dremel or Jarmac, however I am very happy with every product I have purchased from Byrnes, including Jim's table saw.

The machining and construction are visually impeccable, but more importantly; it is a solid tool that gives repeatable results at a very fine scale.

Between the saw and Jim's thickness sander, I have not purchased a piece of dimensional lumber in 8 years - other than a 4"x6"x18" block of basswood!

I'm not aware of an instance where the extra money for one of Jim's saws was ever regretted. His rope walk is as much an art piece as a tool.

M


On Feb 21, 2020, at 10:47 AM, Dusty <Dustburm@q.com> wrote:

Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Re: Calling all builders!

Climax@...
 

Any of those will draw blood in an instant, and separate a digit from your hand leaving you with only 9!  Properly used any of the saws will do any job you need.  I have a Dremel and it scares he hell out of me more than my full size Craftsman table saw.  As a kid the neighbor across from me was Norwegian and a wood worker.  He had a wood shop in a separate building.  He had his 3 fingers in a Mason jar full of formaldehyde on a shelf above the saws, impressive for a kid!  After 73 years and working on all kinds of saws, lathes, milling machines and other stuff I still have all mine, but I have to admit that I have lost blood once in a while.
Dave

 -----Original Message----- 
From: Dusty
Sent: Feb 21, 2020 10:47 AM
To: HOn3@groups.io
Subject: [HOn3] Calling all builders!

Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Re: Calling all builders!

Mark Rosche
 

Can second the recommendation of the Proxxon mitre/chop saw...even the larger mini table saw from Proxxon is very good (the smaller Proxxon table saw I would NOT recommend though)...

Regards,

Mark

Don‘t take life too seriously...no one gets out alive anyway....

Re: Calling all builders!

Mike Van Hove
 

Dusty,
I never used it, but my good friend, the late Tom Troughton, used one and loved it.  Said there was no comparison to the Dremel or others.
Those of you who knew Tom, know that he was very particular about his workmanship, and he was at the top of the heap as a model builder.
Therefore, I would say if you can afford the Brynes Saw, get it, you won’t be disappointed.
I think maybe Pete Smith or John Kalin may have bought his saw, after he died, maybe they will chime in here, for more information.  Perhaps Allen Pollock can tell you who bought the saw from his wife, Sheryl.
Tom was a good friend, and I sure do miss him.
Mike Van Hove
Columbia, Mo

On Feb 21, 2020, at 9:47 AM, Dusty <dustburm@q.com> wrote:

Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Re: Calling all builders!

Stephen Silver
 

I just bought a Proxxon Chop/Mitre Saw.  If I were buying a table saw for scale sized pieces, I would look at the Proxxon

Life is mostly attitude and timing


On Friday, February 21, 2020, 07:47:54 AM PST, Dusty <dustburm@q.com> wrote:


Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Calling all builders!

Dusty
 

Does anyone use a Byrnes table saw? Opinions? Hefty price but it looks much higher quality than Dremel or Jarmac.

Dusty Burman 

Re: PSC tank car kits

Robert Bell
 

Thanks Jim.  I was planning on making it narrow gauge by the simplest method - either adding NG trucks & couplers, OR building tank and mounting it on a flatcar.  From what you say, I will be adding NG trucks.

Thanks again!
Rob

sold: 3 sprue nippers.

lloyd lehrer
 

all gone to good homes.

lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097

--
lloyd lehrer

one left: Micromark sprue nipper

lloyd lehrer
 


# 82393 mircomark Price $19.95
My price:13 bucks includes shipping .  Paypal friends or checks.

lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097

--
lloyd lehrer

Re: FS: 3 sprue nippers

lloyd lehrer
 

apologies I should have been off group.
lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097


On Thu, Feb 20, 2020 at 2:49 PM lloyd lehrer <lloydlehrer@...> wrote:
three and new in their plastic sleeves.

lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097


On Thu, Feb 20, 2020 at 2:48 PM Mark Lewis <narrowrails12@...> wrote:
Lloyd

Are yours brand new and do you have just the 1 pair for sale?

Mark Lewis 
Narrow gauge modeling in N.C.

On Thu, Feb 20, 2020, 5:06 PM lloyd lehrer <lloydlehrer@...> wrote:
New Micromark plastic sprue nippers
Tweezer Sprue Cutter, Despruing Tweezer
# 82393 mircomark Price $19.95
My price:13 bucks each includes shipping .  Paypal friends or checks.
lloyd lehrer, MANHATTAN BEACH, CA (310)951-9097

--
lloyd lehrer


--
lloyd lehrer