Date   
Re: Relettering Blackstone Coach

Dusty
 

Think the Vallejo color is 71-017 Russion green?

Westside Heisler #3

Paul Sturtz
 

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul

Re: Westside Heisler #3

Doug Cummings
 

Should be water in the forward tank and oil in the rear one. There should be a large lid on the water tank, and a smaller one on the oil tank. 


From: "Paul Sturtz" <apa_208@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 7:38:35 PM
Subject: [HOn3] Westside Heisler #3

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul

Re: Westside Heisler #3

Doug Cummings
 

Ooooooooooops, I should know better. . . . . . .water in the rear, oil in the front. 

Doug


From: "Doug Cummings" <dougcummings@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 8:19:58 PM
Subject: Re: [HOn3] Westside Heisler #3

Should be water in the forward tank and oil in the rear one. There should be a large lid on the water tank, and a smaller one on the oil tank. 


From: "Paul Sturtz" <apa_208@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 7:38:35 PM
Subject: [HOn3] Westside Heisler #3

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul
_._,_._,_


Re: Relettering Blackstone Coach

tonyk537
 

The red was posted also but I can't find it.

Re: Relettering Blackstone Coach

Mike Conder
 

I've tried the Vallejo Red Leather bUT it's a bit off.  I'm not good with mixing paints so was hoping someone had already done the footwork on this.

If not, time to practice mixing!

Mike Conder 

On Sat, Jan 12, 2019, 10:51 PM tonyk537 via Groups.Io <Tonyk375=aol.com@groups.io wrote:
The red was posted also but I can't find it.

Re: Relettering Blackstone Coach

tonyk537
 

Found it.  Sorry I don't remember who posted it but they said it was the best color.

Vallejo Burnt Cadmium RAL 8012  In their Model color line.

Re: Relettering Blackstone Coach

Mark Kasprowicz
 

Mike,

It's Railmatch LMS Crimson Lake.

A Friend in England.

Boone Morrison Collection on ebay

Keith Wiseman
 
Edited

Hello All,

We are finally listing much of Boone's collection on ebay.  Many Cars, structures etc that are the subjects of many of His articles and more.  We will have more items, loads of parts etc over the next few weeks.  All is being sold as auctions due to the terms of the consignment.  I am happy to answer any questions here, but items have to sell as auction listings. Link to the items below.  

https://www.ebay.com/sch/m.html?_odkw=&_ssn=wisemodserv&hash=item23b3a7d10a%3Ag%3AZkUAAOSwprtcOqLi%3Ark%3A58%3Apf%3A0&item=153337975050&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313.TR12.TRC2.A0.H0.Xmorrison.TRS0&_nkw=morrison&_sacat=0

Keith Wiseman 
Wiseman Model Services. 

FS: Blackstone HOn3 K-27 453, 458

silent_11111 <silent_11111@...>
 

Hey everyoneI have 2 Blackstone engines I'd like to sell. K-27 #458 Moffat Tunnel Herald  B310123-S
K-27 #453 Flying Grande Herald w/Doghouse
B310102-S

 

Both engines have seen minor use on my small setup.

 

I'm asking $350 shipped for each to the lower 48.

I highly prefer PayPal.

 

Thanks

Re: Westside Heisler #3

Paul Sturtz
 

Thanks, Doug.  Now I can properly weather it.
Paul

Re: A Trip on the EBT

Steven Haworth
 

Nice modeling!  Even having seen this in person, this is a great view and shows things I didn't fully realize.  Scenery and structures are coming along very nicely - well done!!

- Digger
RGS history - http://www.rgsrr.info/
Blog - http://rgsrr.blogspot.com/               FB - https://www.facebook.com/stevesrgs/


On Fri, Jan 11, 2019 at 12:46 PM Dave Phillips <daphilli@...> wrote:
Robert,

Here’s a direct link to the FEBT Company Store: https://www.febt.org/Costore

Dave Phillips
FEBT Company Store


Re: Relettering Blackstone Coach

Mike Conder
 

Thanks Tony!

Thanks Friend for England  (aka FFE)!

Mike Conder 

On Sun, Jan 13, 2019, 1:56 AM Mark Kasprowicz <marowicz@... wrote:
Mike,

It's Railmatch LMS Crimson Lake.

A Friend in England.

priming F.U.D.

kevin b
 

to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: NG truck identification

James Bass
 

Eureka Hill RR, Mike.

Sam Bass

Re: priming F.U.D.

Mike Conder
 

I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder

On Mon, Jan 14, 2019 at 3:56 PM kevin b via Groups.Io <arcatruck13=yahoo.com@groups.io> wrote:
to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: priming F.U.D.

Mike Conder
 

I meant, " ... painting a red boxcar or something..."

Darn autocorrect.

Mike Conder

On Mon, Jan 14, 2019 at 7:57 PM Mike Conder <vulturenest1@...> wrote:
I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder

On Mon, Jan 14, 2019 at 3:56 PM kevin b via Groups.Io <arcatruck13=yahoo.com@groups.io> wrote:
to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: priming F.U.D.

kevin b
 

thank you sir.
that's exactly what I needed to know.

have a happy day.
Kevin.


 

I've used a Krylon red primer with excellent results.  Highly recommended, easy to weather if you're paying a red boxcar or something.

Mike Conder


Re: NG truck identification

Mike Conder
 

Thanks Sam, I knew I read wrong but just couldn't come up with the name and knew you'd eventually help me get it right!

Mike Conder

On Mon, Jan 14, 2019 at 5:24 PM James Bass <tinticng2@...> wrote:
Eureka Hill RR, Mike.

Sam Bass

Re: C&NW NG truck identification

roundbell@...
 

There is a C & NW (Wisconsin ) N G box car on display in a S G gon at the Duluth RR Mus. (Quite nice with a Mc Giffert log loader as a bonus. Didn't look to see if it had trucks.    Wayne Weiss



-----Original Message-----
From: tonyk537 via Groups.Io <Tonyk375@...>
To: HOn3 <HOn3@groups.io>
Sent: Wed, Jan 9, 2019 2:42 am
Subject: Re: [HOn3] NG truck identification

On Mon, Jan 7, 2019 at 09:32 PM, Randy Hees wrote:
Was going to ask if the A&NM 2nd hand flat cars from the C&NW lines in the Black hills or Wisconsin.  But doubled checked the Narrow Gauge discussion group and a 2009 posting from Dave Grandt said they were most likely from Wisconsin.