Date   
A friend with cars for sale.

Steve Hatch
 

 
I had an HOn3 layout which I had to dismantle when we moved here.  I have about 40 freight cars which I painted and lettered with the D&RGW bug herald scheme.  I'd like to give them a good home.  I know you model Sn3 but if you know anyone interested in these cars, I can provide a list.  I'd like to get some money for the cars but can be flexible on the price.  Thanks.
 
Terry Fearn

send him e-mail at:
fearnca (at) msn.com
             (@)

Re: A friend with cars for sale.

Towne Comee
 

Thanks for letting me know, Steve.  I'll put the word out to the very few friends I have who model HOn3!

Towne
 
8804 Brigadoon 
San Antonio, Texas 78254
210-647-1965
 


On Saturday, January 12, 2019, 1:41:50 PM CST, Steve Hatch <hatch@...> wrote:


 
I had an HOn3 layout which I had to dismantle when we moved here.  I have about 40 freight cars which I painted and lettered with the D&RGW bug herald scheme.  I'd like to give them a good home.  I know you model Sn3 but if you know anyone interested in these cars, I can provide a list.  I'd like to get some money for the cars but can be flexible on the price.  Thanks.
 
Terry Fearn

send him e-mail at:
fearnca (at) msn.com
             (@)

Re: Relettering Blackstone Coach

tonyk537
 

Someone posted it for a Vallejo color on the old board.  I'm looking for it.

Re: Shapeways Prep Question

Dusty
 

Ended up Simple Greening with Ivory Liquid chaser.
So far...
1. Fit body to floor.
2. Drilled/tapped floor for 0-80.
3. Disassembled Blackstone trucks removing side bearer roller assembly.
4. Attach trucks.
Next....
1. Finalize truck/couple height. (Think temporary gluing)
2. Enlarge side bearer center hole to clear truck mounting bolster pad.
3. Reassemble trucks.
4. Test and trim body side bearer to clear truck side bearer rollers.
5. Reassemble and test.

Margarita time.

Dusty Burman 

Re: Shapeways Prep Question

Lee Gustafson
 

Dusty,

That's a good day's work! What's on the schedule for Sunday? ;-)

Lee Gustafson




-----Original Message-----
From: Dusty <dustburm@q.com>
To: HOn3 <HOn3@groups.io>
Sent: Sat, Jan 12, 2019 6:14 pm
Subject: Re: [HOn3] Shapeways Prep Question

Ended up Simple Greening with Ivory Liquid chaser.
So far...
1. Fit body to floor.
2. Drilled/tapped floor for 0-80.
3. Disassembled Blackstone trucks removing side bearer roller assembly.
4. Attach trucks.
Next....
1. Finalize truck/couple height. (Think temporary gluing)
2. Enlarge side bearer center hole to clear truck mounting bolster pad.
3. Reassemble trucks.
4. Test and trim body side bearer to clear truck side bearer rollers.
5. Reassemble and test.

Margarita time.

Dusty Burman 

Re: Relettering Blackstone Coach

Dusty
 

Think the Vallejo color is 71-017 Russion green?

Westside Heisler #3

Paul Sturtz
 

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul

Re: Westside Heisler #3

Doug Cummings
 

Should be water in the forward tank and oil in the rear one. There should be a large lid on the water tank, and a smaller one on the oil tank. 


From: "Paul Sturtz" <apa_208@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 7:38:35 PM
Subject: [HOn3] Westside Heisler #3

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul

Re: Westside Heisler #3

Doug Cummings
 

Ooooooooooops, I should know better. . . . . . .water in the rear, oil in the front. 

Doug


From: "Doug Cummings" <dougcummings@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 8:19:58 PM
Subject: Re: [HOn3] Westside Heisler #3

Should be water in the forward tank and oil in the rear one. There should be a large lid on the water tank, and a smaller one on the oil tank. 


From: "Paul Sturtz" <apa_208@...>
To: HOn3@groups.io
Sent: Saturday, January 12, 2019 7:38:35 PM
Subject: [HOn3] Westside Heisler #3

May sound like a dumb question, but which of the two hatches on the bunker is for filling water and oil?  Looked all over to no avail.
Paul
_._,_._,_


Re: Relettering Blackstone Coach

tonyk537
 

The red was posted also but I can't find it.

Re: Relettering Blackstone Coach

Mike Conder
 

I've tried the Vallejo Red Leather bUT it's a bit off.  I'm not good with mixing paints so was hoping someone had already done the footwork on this.

If not, time to practice mixing!

Mike Conder 

On Sat, Jan 12, 2019, 10:51 PM tonyk537 via Groups.Io <Tonyk375=aol.com@groups.io wrote:
The red was posted also but I can't find it.

Re: Relettering Blackstone Coach

tonyk537
 

Found it.  Sorry I don't remember who posted it but they said it was the best color.

Vallejo Burnt Cadmium RAL 8012  In their Model color line.

Re: Relettering Blackstone Coach

Mark Kasprowicz
 

Mike,

It's Railmatch LMS Crimson Lake.

A Friend in England.

Boone Morrison Collection on ebay

Keith Wiseman
 
Edited

Hello All,

We are finally listing much of Boone's collection on ebay.  Many Cars, structures etc that are the subjects of many of His articles and more.  We will have more items, loads of parts etc over the next few weeks.  All is being sold as auctions due to the terms of the consignment.  I am happy to answer any questions here, but items have to sell as auction listings. Link to the items below.  

https://www.ebay.com/sch/m.html?_odkw=&_ssn=wisemodserv&hash=item23b3a7d10a%3Ag%3AZkUAAOSwprtcOqLi%3Ark%3A58%3Apf%3A0&item=153337975050&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313.TR12.TRC2.A0.H0.Xmorrison.TRS0&_nkw=morrison&_sacat=0

Keith Wiseman 
Wiseman Model Services. 

FS: Blackstone HOn3 K-27 453, 458

silent_11111 <silent_11111@...>
 

Hey everyoneI have 2 Blackstone engines I'd like to sell. K-27 #458 Moffat Tunnel Herald  B310123-S
K-27 #453 Flying Grande Herald w/Doghouse
B310102-S

 

Both engines have seen minor use on my small setup.

 

I'm asking $350 shipped for each to the lower 48.

I highly prefer PayPal.

 

Thanks

Re: Westside Heisler #3

Paul Sturtz
 

Thanks, Doug.  Now I can properly weather it.
Paul

Re: A Trip on the EBT

Steven Haworth
 

Nice modeling!  Even having seen this in person, this is a great view and shows things I didn't fully realize.  Scenery and structures are coming along very nicely - well done!!

- Digger
RGS history - http://www.rgsrr.info/
Blog - http://rgsrr.blogspot.com/               FB - https://www.facebook.com/stevesrgs/


On Fri, Jan 11, 2019 at 12:46 PM Dave Phillips <daphilli@...> wrote:
Robert,

Here’s a direct link to the FEBT Company Store: https://www.febt.org/Costore

Dave Phillips
FEBT Company Store


Re: Relettering Blackstone Coach

Mike Conder
 

Thanks Tony!

Thanks Friend for England  (aka FFE)!

Mike Conder 

On Sun, Jan 13, 2019, 1:56 AM Mark Kasprowicz <marowicz@... wrote:
Mike,

It's Railmatch LMS Crimson Lake.

A Friend in England.

priming F.U.D.

kevin b
 

to all.

I have some questions about priming shapeways printed Frosted Ultra Detail:

I've just finished giving my models a simple green and warm water wash up, now allowing time to air dry etc.
(thanks for the discussion about that)

what I would like to know is:

what do you guys use to prime with?

has anyone used an automotive type primer (spray can) on FUD before?

thanks in advance for your help.

Kevin.

Re: NG truck identification

James Bass
 

Eureka Hill RR, Mike.

Sam Bass