Conductive traces (was: Re: [HOn3] MDC Moose Jaws Loco)

Bill Lugg

Not directly applicable to the Moose Jaws topic, but possibly useful in general, here are a couple of links to materials that I've seen written about in the MR press recently:

This one was in an article in MRH I believe and was used to conduct power to lights in the shell of a diesel.  Unfortunately I don't remember how the wires were bonded to the trace now.

Here's the copper foil tape I think Dave is talking about below, 21.8 yards of the 1/4" wide material seems like it would last a long time for an HO model builder and the price seems pretty reasonable. I'm not sure it would solve Kevin's issue though.

Bill Lugg

On 11/8/20 8:23 AM, wrote:
You can get that copper foil sticky tape at any outlet that deals with stained glass windows.  It can be gotten in most widths, a good variety to have on hand is recommended.   In addition to what has been talked about here, you can use it inside structures, stuck to walls or under "wall paper" or sandwiched between wood, or even painted, to run power around in structures.  To change directions one only has to fold the tape and never cut it.   I also use it for copper roofs on structures as well.  With the proper chemicals you can weather the "real copper" and make it various shades of green.

-----Original Message-----
From: Bruce
Sent: Nov 8, 2020 8:20 AM
Subject: Re: [HOn3] MDC Moose Jaws Loco

Not sure of availability in Europe but here in the U.S. Amazon has
it.  I bought a four roll pack (life time supply) for $12.  Search
"copper foil tape".

I used mine for a electric distribution bus inside my East Broad
Top roundhouse.

Never thought of it for on an engine or rolling stock. Thanks Mark!

Join to automatically receive all group messages.