toggle quoted messageShow quoted text
Are you up to building your own? A SWAC/2 is a great throttle and has memory - speed won’t change when you unplug, move to a different location, and plug in again.
On Mon, Sep 21, 2020 at 7:58 PM <Climax@...
Earl, before I got into PFM Sound, I used MRC 501 transformers. I actually took them apart, removed the rheostat and used a telephone cable between the transformer and a small box with a metal lid that screwed on that I got at Radio Shack. I also installed a double pole double throw center off toggle so I could reverse direction or just shut the power off. I put the MRC units under the layout and have about 20 feet of cable so I had a 40 foot reach. One end went into the transformer and the other into the bottom end of the box. I had a loop on the top of the box so I could hang it up on hooks on the side of the layhout. Since my room was only 30 x 30 that was enough. Worked like a champ.
From: Earl Knoob
Sent: Sep 21, 2020 10:48 PM
Subject: [HOn3] DC Power Supply Search
After many years I am getting back into HOn3 and once settled into my new house, I can start on my first layout in over 30 years.
The layout will be a one-man operation, with one train running at a time. I will be doing old-school DC. With over 25 HOn3 locomotives that I'd like to see running at some time or another, adding DCC decoders to all of them is.....well not going to happen.
I have found there is very little in the way of DC quality power supplies available today. Looking through Walther's catalog, MRC seems to be the only one left in business. I need to have tethered walk around capability, which further limits my choices.
Any and all suggestions appreciated,