Re: #18

Paul Sturtz
 

Not sure I understand the question.  There is a fine line in cutting the gearbox; too much and it can be ruined.  Too little and there isn't enough clearance for the new smaller wheels.  Many of the Bachmann axle gears are split and must be fixed.  I used washers cut from aluminum tubing and press fit on the axles,  The photo shows what I did.  The LED on the cab end must be shortened if you lower the cab.  Not difficult but easy to mess up.  Hope this helps.
Paul Sturtz

Join HOn3@groups.io to automatically receive all group messages.