MSRP $450 Makes the GGD "Harriman" cars look like a real value... ken clark www.shastasprings.com -- ken clark HO and Sn42

I haven't had one of these for a long time, and then only briefly. One big problem with the PFM logging 2-6-6-2 is that the drivers are 10% oversize and the whole engine was proportionately inflated.

After the recent discussion on resistance soldering; I dug deep into my workshop and found some interesting extras and orphans... I have Hotip 200 watt units - used, working, with and without handpiec

Grandt Line is calling it quits. https://www.grandtline.com/ Over the years I have used their universals, gears, and even a motor or two in a variety of projects and built many kits using their detail

What's next for this poor engine? Yellow Borg? Red Warbonnet? ken clark www.shastasprings.com -- ken clark HO and Sn42

Today, I've been doing maintenance on my e-mail messages, deleting thousands of old messages if the goal. Yhe last two months I have been getting hundreds more each week and I haven't deleted all of t

I would like to put a C&O type cab on a Mantua 2-8-2, any suggestions? I'm also interested in putting a track wiper on a Mantua Pacific any suggestion on where to get small pieces of phosphor bronze.

At one time these locos were everywhere, Now I don't seem them discussed. Anyone still running on of these oldies but goodies? Have you upgraded the motor/drivetrain?

The new motor (six pole, four magnetic poles) is 18.2mm x18.2mm square designed for automobile mirrors, it can handle up to 24 volts. AT 12 volts the no load RPM is 7200RPM at 40 milliamps. The price

Hi Guys, I have a Bachmann Spectrum 2-8-0 that has been sitting on the shelf since I bought it ages ago because it only runs in reverse. Any ideas what might be wrong with it?TIA Bob Weston

My project for this month is working on upgrading an old loco from my youth. My father built our first layout on a 5x9 sheet of plywood (ping pong table sheet) and it had two levels. Initially we used

All, Recently I have been transferring four old YG lists to new lists on groups.io There is one recurring problem, a few members immediately quit the new group when they are welcomed as new members. P

All, Recently I have been transferring four old YG lists to new lists on groups.io There is one recurring problem, a few members immediately quit the new group when they are welcomed as new members. P

At noon today the invitation to join groups.io was accepted and transfer (copying of the group database) has been requested?. When the transfer is complete, including membership profiles, all members

All, I have been list owner for over ten years, during that time discussions have slowly dies off or moved to other groups like DCC or Repowering or RR specific. Below are the yearly message counts fo

Ken Move the list io . Yahoo groups has had two many breakdowns in the last six months. Doug Boudakian

Maybe it should be moved now as it seems nothing is being done at Yahoo to assure the future. Again I have not experienced these problems but then several of the groups I belong to I just for informat

All Scale Rails Issue #18 January / February 2018 has just hit the internet! www.AllScaleRails.com www.AllScaleRails.com Included in this issue: KATO 2017 Contest, Trainfest 2017, CN's Little Obie, Ra

All Scale Rails Issue #17 November / December 2017 has just hit the internet! www.AllScaleRails.com Subscribe to our free email list & Get notified when new issues come out. https://gem.godaddy.com/si

Look up Wawa and Concordville Railroad for one all dressed up back in the 1970s. Now at a restaurant in New Jersey, I think. BobD. Powered by Cricket Wireless -------- Original message -------- From: