[HOsteam] Re: Flat can with a long shaft.


Victor Bitleris
 

Hi Pete,
Very good! It looks like you were able to get two magnets that fit perfectly. That is about the best case possible. If the motor has good bearings and good balance, which I suspect it does, it should last darn near forever. I would feel really good about putting a decoder in with that motor.
Most people have to use about 3 or 4 (or more) magnets and also use steel shims to fill out the space properly. Even under the imperfect conditions of needing to use shims, the performance is increased significantly and plenty good enough to use a decoder. Yours appears to be just about the best case I have seen.
Good luck and regards,
Vic Bitleris
Raleigh, NC

To: HOsteam@yahoogroups.com
From: locoi1sa@comcast.net
Date: Sat, 11 Feb 2012 01:12:38 +0000
Subject: [HOsteam] Re: Flat can with a long shaft.
































Fellas.

There are 3 more pics in the album with the new magnets.

Pete


















[Non-text portions of this message have been removed]