|
Change in E-mail delivery for lists on groups.io
All,
Recently I have been transferring four old YG lists to new lists on groups.io
There is one recurring problem, a few members immediately quit the new group when they are welcomed as new
All,
Recently I have been transferring four old YG lists to new lists on groups.io
There is one recurring problem, a few members immediately quit the new group when they are welcomed as new
|
By
SP4149
·
#4592
·
|
|
Re: Backwards Bachmann 2-8-0
What do you mean by "it only runs in reverse"?
Wayne Long
What do you mean by "it only runs in reverse"?
Wayne Long
|
By
Wayne Long
·
#4591
·
|
|
Re: Backwards Bachmann 2-8-0
Is it possible that the 2 wire plug between the engine and tender has had the clip removed and been installed the opposite of what it should be? It could also be the 4 wire which is flipped, I don't
Is it possible that the 2 wire plug between the engine and tender has had the clip removed and been installed the opposite of what it should be? It could also be the 4 wire which is flipped, I don't
|
By
Darren Boes
·
#4590
·
|
|
Backwards Bachmann 2-8-0
Hi Guys,
I have a Bachmann Spectrum 2-8-0 that has been sitting on the shelf since I bought it ages ago because it only runs in reverse. Any ideas what might be wrong with it?TIA
Bob Weston
Hi Guys,
I have a Bachmann Spectrum 2-8-0 that has been sitting on the shelf since I bought it ages ago because it only runs in reverse. Any ideas what might be wrong with it?TIA
Bob Weston
|
By
Bob Weston
·
#4589
·
|
|
Re: Invitation to join groups.io accepted.
Thanks for adding me
By
william
·
#4588
·
|
|
Invitation to join groups.io accepted.
At noon today the invitation to join groups.io was accepted and transfer (copying of the group database) has been requested?.
When the transfer is complete, including membership profiles, all
At noon today the invitation to join groups.io was accepted and transfer (copying of the group database) has been requested?.
When the transfer is complete, including membership profiles, all
|
By
Ken Clark
·
#4587
·
|
|
Re: Decision Time For HO Steam - Poll
So far 4 list members have voted to move the list, out of the 4 who voted.
Less than 1% of the members, maybe the messages aren't getting to all members
and no one has complained.
Since it costs
So far 4 list members have voted to move the list, out of the 4 who voted.
Less than 1% of the members, maybe the messages aren't getting to all members
and no one has complained.
Since it costs
|
By
Ken Clark
·
#4586
·
|
|
Re: Decision Time For HO Steam - Poll
HI Ken
I agree. a move seems like a good idea. A couple of other groups I'm in have done so already
Mark
HI Ken
I agree. a move seems like a good idea. A couple of other groups I'm in have done so already
Mark
|
By
prgm_mgr
·
#4585
·
|
|
Re: [HOsteam] Decision Time For HO Steam - Poll
Ken
Move the list io . Yahoo groups has had two many breakdowns in the last six months.
Doug Boudakian
Ken
Move the list io . Yahoo groups has had two many breakdowns in the last six months.
Doug Boudakian
|
By
Doug Boudakian
·
#4584
·
|
|
Re: [HOsteam] Decision Time For HO Steam - Poll
John,
One thing a move will show is how many members are really on this list.
My other list lost 10% of it's members just due to dead e-mail addresses.
When you think outside the box,
You are out of
John,
One thing a move will show is how many members are really on this list.
My other list lost 10% of it's members just due to dead e-mail addresses.
When you think outside the box,
You are out of
|
By
Ken Clark
·
#4583
·
|
|
Re: [HOsteam] Decision Time For HO Steam - Poll
Maybe it should be moved now as it seems nothing is being done at Yahoo to assure the future.
Again I have not experienced these problems but then several of the groups I belong to I just for
Maybe it should be moved now as it seems nothing is being done at Yahoo to assure the future.
Again I have not experienced these problems but then several of the groups I belong to I just for
|
By
John Hagen
·
#4582
·
|
|
Decision Time For HO Steam - Poll
All,
I have been list owner for over ten years, during that time discussions have slowly dies off or moved to other groups like DCC or Repowering or RR specific. Below are the yearly message
All,
I have been list owner for over ten years, during that time discussions have slowly dies off or moved to other groups like DCC or Repowering or RR specific. Below are the yearly message
|
By
Ken Clark
·
#4581
·
|
|
All Scale Rails Issue #18 January / February 2018
All Scale Rails
Issue #18
January / February
2018
has just hit the internet!
www.AllScaleRails.com
www.AllScaleRails.com
Included in this issue:
KATO 2017 Contest, Trainfest 2017, CN's
All Scale Rails
Issue #18
January / February
2018
has just hit the internet!
www.AllScaleRails.com
www.AllScaleRails.com
Included in this issue:
KATO 2017 Contest, Trainfest 2017, CN's
|
By
All Scale Rails All Scale Rails
·
#4580
·
|
|
Issue #17 November / December 2017
All Scale Rails
Issue #17
November / December
2017
has just hit the internet!
www.AllScaleRails.com
Subscribe to our free email list & Get notified when new issues come
All Scale Rails
Issue #17
November / December
2017
has just hit the internet!
www.AllScaleRails.com
Subscribe to our free email list & Get notified when new issues come
|
By
All Scale Rails All Scale Rails
·
#4579
·
|
|
Re: [HOsteam] Re: Bachmann HO Porter 0-6-0T
Look up Wawa and Concordville Railroad for one all dressed up back in the 1970s. Now at a restaurant in New Jersey, I think.
BobD.
Powered by Cricket Wireless
Look up Wawa and Concordville Railroad for one all dressed up back in the 1970s. Now at a restaurant in New Jersey, I think.
BobD.
Powered by Cricket Wireless
|
By
Robert Deffinger
·
#4578
·
|
|
Re: Bachmann HO Porter 0-6-0T
1/2014 Model Railroader states the following:
The Bachmann model matches a photo of an 0-6-0 side tank locomotive shown in the 1892 Porter catalog. The major dimensions of the model, including its
1/2014 Model Railroader states the following:
The Bachmann model matches a photo of an 0-6-0 side tank locomotive shown in the 1892 Porter catalog. The major dimensions of the model, including its
|
By
Joe Bania
·
#4577
·
|
|
Re: [HOsteam] Bachmann HO Porter 0-6-0T
I have one on order at this moment, with the intent of stripping it down to the mechanism and building another loco on top – provided the wheel diameter and base are close. So if there is a
I have one on order at this moment, with the intent of stripping it down to the mechanism and building another loco on top – provided the wheel diameter and base are close. So if there is a
|
By
Robert kirkham
·
#4576
·
|
|
Bachmann HO Porter 0-6-0T
Hello,
I am in need of the wheel diameter and wheelbase for the Bachmann HO Porter 0-6-0T, please?
Also, does it have a prototype?
Thanks.
Glen Mills
Hello,
I am in need of the wheel diameter and wheelbase for the Bachmann HO Porter 0-6-0T, please?
Also, does it have a prototype?
Thanks.
Glen Mills
|
By
Vera Mills
·
#4575
·
|
|
All Scale Rails Issue #16 September / October 2017
All Scale Rails
Issue #16
September / October
2017
has just hit the internet!
www.AllScaleRails.com
www.AllScaleRails.com
Included in this issue:
National Model Railroad Association,
All Scale Rails
Issue #16
September / October
2017
has just hit the internet!
www.AllScaleRails.com
www.AllScaleRails.com
Included in this issue:
National Model Railroad Association,
|
By
All Scale Rails All Scale Rails
·
#4574
·
|
|
Walthers USRA 0-8-0
Looking to replace the plastic valve gear with working valve gear. Need a suggestion as to what would be appropriate.
Thanks,
Rich Ramik
Looking to replace the plastic valve gear with working valve gear. Need a suggestion as to what would be appropriate.
Thanks,
Rich Ramik
|
By
richramik@...
·
#4573
·
|