|
Project Loon post
I have been using flight waare to keep track of them, had one fly almost directly over me a few weeks ago passed only about a mile north of me. classic pumpkin look in binoculars. was super bright in
I have been using flight waare to keep track of them, had one fly almost directly over me a few weeks ago passed only about a mile north of me. classic pumpkin look in binoculars. was super bright in
|
By
Joe WB9SBD
· #17658
·
|
|
Burst altitude
Hi Steve, Thanks for making the confirmation on my calculations. I was amazed that that little balloon granted with no work to do could reach as high as it was calculating to be. I was close, I was ab
Hi Steve, Thanks for making the confirmation on my calculations. I was amazed that that little balloon granted with no work to do could reach as high as it was calculating to be. I was close, I was ab
|
By
Joe WB9SBD
· #17614
·
|
|
Burst altitude
It has been a LONG LONG time since I have calculated a burst altitude. Let me see if I am STILL doing it correctly.. I did a calculation on a tiny 100 gram Kamont balloon. Now i know in theroy this wo
It has been a LONG LONG time since I have calculated a burst altitude. Let me see if I am STILL doing it correctly.. I did a calculation on a tiny 100 gram Kamont balloon. Now i know in theroy this wo
|
By
Joe WB9SBD
· #17612
·
|
|
calculate elevation
geez 20+ years ago I had a .BAS program where if I put into it my lat/long/alt, and a second lat/long/alt it would spit out a az and el of where the balloon would be in my sky. is there a way to do th
geez 20+ years ago I had a .BAS program where if I put into it my lat/long/alt, and a second lat/long/alt it would spit out a az and el of where the balloon would be in my sky. is there a way to do th
|
By
Joe WB9SBD
· #17593
·
|
|
Balloons This Morning
Looks like three were launched by Ravens this morning! Depending on where they go I may be able to see them. https://www.flightradar24.com/HBAL04/25366d23 Joe WB9SBD
Looks like three were launched by Ravens this morning! Depending on where they go I may be able to see them. https://www.flightradar24.com/HBAL04/25366d23 Joe WB9SBD
|
By
Joe WB9SBD
· #17591
·
|
|
Hydrogen regulators?
They key is for H2 is left hand thread. AND even for safety the pressure it can take. that one looks good in both cases. NOW the one we have been using 30+ years of flights, been using H2 from first f
They key is for H2 is left hand thread. AND even for safety the pressure it can take. that one looks good in both cases. NOW the one we have been using 30+ years of flights, been using H2 from first f
|
By
Joe WB9SBD
· #17577
·
|
|
Superpressure balloon valve / was Re: [GPSL] K5NOT-11 WSPR Balloon Failure
I remember the data that matched mine, was the actual flying flight. There was a small but very detectable spike just before burst. And when I did the tensile strength test it was the same way almost
I remember the data that matched mine, was the actual flying flight. There was a small but very detectable spike just before burst. And when I did the tensile strength test it was the same way almost
|
By
Joe WB9SBD
· #17566
·
|
|
Superpressure balloon valve / was Re: [GPSL] K5NOT-11 WSPR Balloon Failure
I did have these numbers, But it was a long time ago. The numbers I got I did it by testing a piece of the envelope it's tensile strength, and doing the tons of math to learn what the pressure differe
I did have these numbers, But it was a long time ago. The numbers I got I did it by testing a piece of the envelope it's tensile strength, and doing the tons of math to learn what the pressure differe
|
By
Joe WB9SBD
· #17560
·
|
|
Superpressure balloon valve / was Re: [GPSL] K5NOT-11 WSPR Balloon Failure
It was a 1500 Kaymont balloon. Knowing the pressure differential is extremely low. When I tested the ping pong ball, I know it leaked badly. The texture of the ball just would not give a good seal. I
It was a 1500 Kaymont balloon. Knowing the pressure differential is extremely low. When I tested the ping pong ball, I know it leaked badly. The texture of the ball just would not give a good seal. I
|
By
Joe WB9SBD
· #17558
·
|
|
K5NOT-11 WSPR Balloon Failure
I did that once. But the ping pong ball surface is too textured and does not make a bubble tight seal. I did a silicone ball and o ring. Even that getting the right spring tension at these tiny tiny p
I did that once. But the ping pong ball surface is too textured and does not make a bubble tight seal. I did a silicone ball and o ring. Even that getting the right spring tension at these tiny tiny p
|
By
Joe WB9SBD
· #17550
·
|
|
Seeing K7HAK11 in waterfall and copying VA5BNC15 direct on APRS here in Alabama
where do you think K7HAK is located Bill? I asked last night for anyones guess and no one had an answer. It may have gone right over me. after sundown so may have been even visible. Joe WB9SBD
where do you think K7HAK is located Bill? I asked last night for anyones guess and no one had an answer. It may have gone right over me. after sundown so may have been even visible. Joe WB9SBD
|
By
Joe WB9SBD
· #17507
·
|
|
Looks like we have a race on our hands.
anyone have a guess where k7hak really is? looks like last up date was almost 30 min ago. it may pass very close to me. Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme
anyone have a guess where k7hak really is? looks like last up date was almost 30 min ago. it may pass very close to me. Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme
|
By
Joe WB9SBD
· #17502
·
|
|
Heating a APRS tracker?
Plus what kind of "Warmer" Most need O2 to operate, and of course where it's cold there is no O2 so just dead wasted weight. Joe WB9SBD
Plus what kind of "Warmer" Most need O2 to operate, and of course where it's cold there is no O2 so just dead wasted weight. Joe WB9SBD
|
By
Joe WB9SBD
· #17451
·
|
|
Go To The Edge Of Space!
oops address https://newatlas.com/space/space-perspective-balloon-capsule/ Joe
oops address https://newatlas.com/space/space-perspective-balloon-capsule/ Joe
|
By
Joe WB9SBD
· #17416
·
|
|
Go To The Edge Of Space!
Only cost ya 125K dollars. But i feel they lost a major cool part, they have the 2 hour trip up, float at 100K for 2 hours, then vent some from the balloon, and about 2 hours down and land in the ocea
Only cost ya 125K dollars. But i feel they lost a major cool part, they have the 2 hour trip up, float at 100K for 2 hours, then vent some from the balloon, and about 2 hours down and land in the ocea
|
By
Joe WB9SBD
· #17415
·
|
|
Imaging the Surface
Thats what I was wondering how the Government from orbit has perfectly neutral colors. Joe WB9SBD
Thats what I was wondering how the Government from orbit has perfectly neutral colors. Joe WB9SBD
|
By
Joe WB9SBD
· #17357
·
|
|
Imaging the Surface
I have yet to see a pic from say 60K and up from anyone's balloon, that you can say the image of the ground even when looking straight down is not color shifted way into the blue. it's almost like a B
I have yet to see a pic from say 60K and up from anyone's balloon, that you can say the image of the ground even when looking straight down is not color shifted way into the blue. it's almost like a B
|
By
Joe WB9SBD
· #17355
·
|
|
Imaging the Surface
Watching the news this morning they had a thing on how they are using orbital satellites to monitor the Covid-19. It was amazing imagery! I can understand Optics on getting the clear resolution. But h
Watching the news this morning they had a thing on how they are using orbital satellites to monitor the Covid-19. It was amazing imagery! I can understand Optics on getting the clear resolution. But h
|
By
Joe WB9SBD
· #17353
·
|
|
Payload Power Sources
DUH?! I shouldn't be reading charts at like 3 AM. UG! Thanks to all who answered my BrainFart! Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com
DUH?! I shouldn't be reading charts at like 3 AM. UG! Thanks to all who answered my BrainFart! Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com
|
By
Joe WB9SBD
· #17308
·
|
|
Payload Power Sources
I am very confused on a battery pack. Say you have a pack that can run 1 amp of current draw for 10 hours. One would think that if you only drew 0.5 amps that it should run for 20 hours or close to it
I am very confused on a battery pack. Say you have a pack that can run 1 amp of current draw for 10 hours. One would think that if you only drew 0.5 amps that it should run for 20 hours or close to it
|
By
Joe WB9SBD
· #17303
·
|