Hi all, Our team is flying Paul V's flight computer for GPSL2019. We need a backup tracker...anyone have a Tinytrak or Opentracker to sell? Thanks, Mike KD0MEQ

GPSL is just around the corner. Things are shaping up for a great weekend, but we need your registration information soon. Please register on the Superlaunch.org web page. Also, get your hotel

GPSL 2019 is June 13,14,15 in Pella, IA. It is time to start developing a presentation you would like to share with the group. There has been a lot of ballooning activity over the past year and I am

We're in touch now.

It depends on what you want to do, and how much you want to spend. If you only want to receive the track, then a cheap $25 Baofeng UV5R HT will receive the APRS Signals. Use a good magnetic mount

Hi I'm working with a group at the University of Saskatchewan who want to start flying balloons as part of one of their grad student programs. One of the items on their to-do list is to build up

Mustafa, I wrote you a private email through the groups.io system within this GPSL list. That was about a week and a half ago. I inquired about the LightAPRS Tracker you were telling us about in

In the Arduino IDE, you can turn on line numbers under FILE->Preferences. Its a checkbox that says "Display line numbers" FI - On the tracksoar, there is a GPS LOCK led that will flash at one

There is a way to turn the line numbers on, but the delay(500); was added just under the call to sensors_setup(); just before if (APRS_SLOT >= 0) .......

In the Arduino ISD showing line numbers is one of the options that can be set on or off. Barry VE6SBS

I am looking at the sketch and see that it doesn't number it's lines. I assume I just count code lines and not blank or comment lines?

I am using V2.

There are two versions of the Tracksoar. They are very different designs (and run different f/w) so you need to be sure with one you have. I've flown version one, it worked fine without much fuss. I

After an hour there still was no transmission.

Try leaving the tracker on longer. I’m going from memory, but I believe the GPS LED is simply tied to the 1 PPS output and it may blink regardless of whether the GPS has lock or not. The first time

Dang speech to text. The LED was on constantly for the 30 seconds I watched it. I turned off the tracker after watching it for 30 seconds.

The LED was on constantly until I turned it off the only did was not blinking for 30 seconds.

If you mean the PTT LED is alternately on for 30 sec’s and then off for 30 sec’s you have definitely have a problem. And although it’s called a PTT LED it isn’t really a true PTT LED, but

I'll try testing that. My D72 doesn't even break squelch, so I was thinking the TrackSoar wasn't even trying to transmit. I had one suggestion to remove the comment statements and then look at debug

I have an older Kenwood TH-D7A that has trouble decoding packets that have a short TXD, especially when the squelch is turned on. I don't know if the D72 has the same issues. You can try running