toggle quoted messageShow quoted text
In the Arduino ISD showing line numbers is one of the options that can be set on or off.
From: GPSL@groups.io [mailto:GPSL@groups.io] On Behalf Of L. Paul Verhage KD4STH
Sent: Monday, April 01, 2019 9:04 AM
Subject: Re: [GPSL] TrackSoar
I am looking at the sketch and see that it doesn't number it's lines. I assume I just count code lines and not blank or comment lines?
There are two versions of the Tracksoar.
They are very different designs (and run different f/w) so you need to be sure with one you have.
I've flown version one, it worked fine without much fuss.
I recently purchased version two, and am experiencing the problems that KD4STH described.
I contacted Tracksoar and they suggested I add "delay(500) to line 61 of the sketch.
That seemed to help (the led's are operating more or less like my version 1), and I can hear the squelch tripped on my handheld with PTT goes bright, but I don't hear the FSK data.
I put it aside at that point as I'm also trying to get a DIY LoRa tracker working, and I have Version 1 to use.
Be very interested if someone gets Version 2 working.