HI, Can someone tell me the dimensions of the fan because I want to buy it before I dismantle the radio. 73, Cornel YO4NA

Had a issue a couple of years ago with windows 11 computer where the virtual USB silicon lab driver were not supported for windows 11. does anyone know if the silicon lab drivers for the 3000 are now

Need source for ftdx3000 to ldg tuner

To whom it concerns, I received a mail that my MTA (mailserver) is bouncing emails send by MTA's from groups.io It looks like that at least 1 MTA is on the blacklist Below a small excerpt of what is s

Anybody using one, and what do you think of it? I know most matching speakers are over priced but wanted to get one to match my 3k while there are a few left.

I own a Yaesu FTdx-3000 which has of late been having an issue with the receive dropping down about 10-20% after unkeying from a transmission ( on SSB ) . It lasts until I tap the PTT on the mic and y

New owner of an FTdx3000. great radio! Step up from the IC-7300 and with SDRplay bandscope the 3000 is a pleasure to operate. I have an ALS-600 with the ARI-500 band switch. I have the correct cable s

I am a firm believer in never upgrading if the radio is working fine. But I am willing to try it since I had an FFT crash (I think) because the FFT screen no longer shows itself - and comes up V00-00

As you know the clarifier knob spins too easily. If you use Walmart, Super Sliders felt pads # 4842222W, 1 inch. Make an X with a razor knife, in the center large enough to allow it to fit over the tr

hi to you all… after looking at a few msgs ftom Dave C from a few yrs ago..about how he has troubles or did in 2021…and a few tips from others i decided to take the radio apart…cause i heard the click

I did a reset on the radio and now I cant get it working with ft8. Also I wonder if anyone can use the ftdx3000 in the ft8 menu as mine does not work at all. Previously I used the ftdx5000 model and i

Page 93 of the user manual indicates "IF SHIFT and WIDTH status" are saved in the memory channel. I cant get this to work. If I save the VFO to (example) Memory number 7 when the WIDTH control is set

Hi List, I am having an issue when a recorded SSB message is played via the FH-2 remote keypad. When playing a message, the RX audio mutes and I hear the recorded message playing, however there is no

Anyone here that can recommend their FTDX3000 speaker setup for SSB and Cw? I am trying to reduce audio hiss so I am using -0100hz on the IF shift for Cw and -0200hz for Ssb. My MS4 does pretty well b

Following the instructions on page 35 of the manual doesn't appear to work. After I press the V/M button, VFO A displays 5.405.000, along with LSB & CW. Turning the main VFO dial doesn't do anything;

Really liking my new to me radio. I use a manual tuner so often I am switching to AM to tune up. the Mode button skips the AM option now (it didn't before). I can still get it to AM with the SDRuno in

Just setup JS8 Call my problem sems to be both VFOs need to be on same frequency If I set my VFO-B to JS8 frequencies it will transmit on VFO-A totally differant set frequency that I have programmed t

I have a brand spankin' new FTdx3K. Love it so far. Most of the time it works great but sometimes does some strange things on power up. 1. Dim freq readout illumination. It does respond to changes in

I purchased my radio from another ham and I'm wondering if it has the DVS-6 installed. Is there a way to tell if it is installed without removing the cover?

I am asking for a hint on what to pay attention to when setting the audio in the FTdx3000 with the Heil Pro7 set to participate in the competition and DX. I don't have long talks on the bands, I mainl