It's been some time since yaesu released an update .... MAYBE during Dayton Hamvention??? Hummmmm?!?! Scott W2ntv

I've finally got my 101 MP to work with WSJT. I am receiving signals from other stations, but when I transmit no signal is going out. The same thing happens when I try to transmit in single sideband.

Anyone using the Koss SB/45 headset with their FTdx101? I am trying to get my set adjusted correctly. There are a lot of adjustments available and it is a challenge to set the correct ones. Below are

Hi everyone ....... I came across this very interesting reading device. You know it, has anyone already bought it? What do you think, can it be useful? Thanks and best regards https://www.catknobz.com

Hi guys is there anyone here that owns ftdx101D/MP and Flex 6xxx ? I'd like to hear impressions expecially about CW dx operation. Thanks a lot, 73 Giorgio IK1BXN (ik1bxn@...)

... and it is wonderful! I packed up the IC-7300 and took a drive down to Martin Lynch... His very helpful staff fed me coffee while I tried out the IC-7610 and FTdx101D - and the answer was clear...

I have read the manual and do not understand the purpose of the orange lights above the band buttons. I read the "i" explanation and just don't get it. 73, Tony K2SG

Hi my 101D external monitor just suddenly stopped working... I Found many stories about this issue. Was there any clarification from yaesu about this issue?

Has anyone come up with a VFO control knob solution for the FTDX101D connected to the PC for better ergonomics compared to a mouse? I am used to have that with a Flexradio or a RC-28 knob for the Icom

Hello I have the Yaesu FTDX101d now for 8 weeks . I offten had the problem that the touch screen not reacts when i touch it. The extral mouse works well. Anyone had this same problem? Is there a soulu

Day 2 with my 101D! Everything is working perfectly. Didyneed a firmware upgrade. Works great on FT8, SSB and CW! The receiver is just amazing! My K3 had an NR (noise reduction) button and I’m thinkin

I have an external tuner, ldg 200 and when I go down to 5 watts to tune it powers down and I use AM when during so. I switched antenna ports and still does same thing. This is new and never seen opera

... can the internal ATU be used to tune up the antenna on the second, or third socket? Martin (G8FXC)

Line 8 of his dump says “Backend copyright: LGPL”, so we should be able to request the source code. Has anyone done this and and it was discussed before I joined? What part of the system does “Backend

So I finally ordered my 101D and it’s arriving tomorrow! Now all I have to do is connect it to y Mac Studio and get it to work! I’ve been told that I have to download the silicon drivers then plug in

Since the last FW update.........

I often sync RX1 and RX2, for a sort of "diversity" reception. Each receiver uses a different antenna: RX1 with my main TX/RX antenna and RX2 with a receive only antenna. When activating the RX clarif

Hello all, and thanks for letting me join! I'm planning a shack upgrade (accountant told me to spend some money and who am I to disagree!) and the FTdx101D is looking increasingly like the solution...

Hello. After watching a youtube video on the subject I bought a Logitech mouse, model M325 (it also has the small orange star on the bottom of the mouse) and installed the small receiver that came wit

I have recently acquired a FTDX 101D with an M90 D Mic. I have been experimenting with the zillion settings available on the radio. Not yet satisfied ! For those owners who are FTDX 101D/MP users with