I have had the 101D for a week now and don't like the audio out. I am a icom user and the icom audio siginal reports are excellent and the Yaesu 101d with the heil 781 doesn't have the punch as to my

I was able to get FlRig and FlDigi to connect to my 101D via win4yaesu virtual USB port (Enhanced for CAT and Standard for PTT). When I vary the VFO the frequency on FlDigi tracks. Good so far. Questi

Is there any trick to setup FTDX101D to send 10 ~ 20W carrier to tune the non-Yaesu (FC-40) remote antenna tuner - hopefully by using "TUNE" button ? TU

Hello, thanks for adding me to the group. A little background to the question is, I'm contesting with N1MM+ and would like to use the Spectrum Display in N1MM+ during a contest. I have bought a FTdx10

Hi, I’m new to this group. I purchased the FTdx101D a few months ago and still doing the learning curve. I’m having trouble with the following adjustments. The manual does not explain very well the in

So far I have a love hate relationship with this so called "flagship FTDX101", jury is still out as to whether this is a keeper or not. As well as the other list of issues, that I have with this radio

Hello, I would like to know if there is a way to set the audio bandwidth wider than approximately 3 KHZ when on USB data mode. I work mostly FT8 and occasionally there is a station calling CQ around 2

Hello There is a new version of Win4YaesuSuite which corrects a couple of issues with the use of a WinKey with the CW Terminal. Win4YaesuSuite is a comprehensive control program for the FTDX1200, FTDX

This is a remote operation I use AnyDesk but I am unable to get the radio audio. My setup is a FTdx5000 with easydigital interface to a soundnlaster P3 sound card . the sound card connects to the comp

I have a heil foot switch which has an adapter from phono plug to rca plug. The center pin on the rca plug has broken off and is all the way in to the reception on the back of the radio. (PTT plug). I

Hello I just received my new FTdx101D and obviously I have some problems: 1) I am using Omnirig: which radio should be selected in Omnirig? 2) CAT speed or can this be adjusted in the FT101? 3) Obviou

Have I managed to miss something here, but what's the use of an an external keyboard? Can you use it to have a QSO in CW, RTTY or PSK or is it just for programing the memories? If so what is the advan

In the past 40 years I have owned and enjoyed several Yaesu Radios as listed below. I have had the occasional venture to other brands but I guess I am Yaesu through and through. Radios and their manuf

Been trying to use the CW decode on my FTDX101D. No success? Yes I do have a decoder in my head that I've been using for over 50 years. :) Anyone else experience non CW decode? Why do I want to use th

Hello I have the Yaesu FTDX101d now for 8 weeks . I offten had the problem that the touch screen not reacts when i touch it. The extral mouse works well. Anyone had this same problem? Is there a soulu

Going in to my third week with the 101D, my first dual receiver rig. Presently I have the transceiver set up to run FT8 using the USB cable only. My question is if I wanted to decode FT8 or RTTY on tw

I don’t think I have seen the answer in any Icom, Kenwood or Yaesu group. I have IC-9700 and TS-890, and thinking to add FTDX101D to my shack. Each manufacture does have USB Driver download page. “Sil

I had seen some ad's for this new FT710 which looks like a new lower cost version of the FTDX10, maybe it might be directly competitive with the 7300 but with some added features that are NOT on the 7

I did some experimenting with the FTdx101D I own. I had trouble trying to set the MIC gain, AMC setting, and COMP level. MIC Gain: My first experiment was to find out the MIC input dynamic range. I go

I haven't had luck finding any comments about this and I've noticed this 2 or three times since purchasing my FTDX-101D new last January. This happened last night (7/31). I observed signals were lower