Day 2 with my 101D! Everything is working perfectly. Didyneed a firmware upgrade. Works great on FT8, SSB and CW! The receiver is just amazing! My K3 had an NR (noise reduction) button and I’m thinkin

I have an external tuner, ldg 200 and when I go down to 5 watts to tune it powers down and I use AM when during so. I switched antenna ports and still does same thing. This is new and never seen opera

... can the internal ATU be used to tune up the antenna on the second, or third socket? Martin (G8FXC)

Line 8 of his dump says “Backend copyright: LGPL”, so we should be able to request the source code. Has anyone done this and and it was discussed before I joined? What part of the system does “Backend

So I finally ordered my 101D and it’s arriving tomorrow! Now all I have to do is connect it to y Mac Studio and get it to work! I’ve been told that I have to download the silicon drivers then plug in

Since the last FW update.........

It's been some time since yaesu released an update .... MAYBE during Dayton Hamvention??? Hummmmm?!?! Scott W2ntv

I often sync RX1 and RX2, for a sort of "diversity" reception. Each receiver uses a different antenna: RX1 with my main TX/RX antenna and RX2 with a receive only antenna. When activating the RX clarif

Hello all, and thanks for letting me join! I'm planning a shack upgrade (accountant told me to spend some money and who am I to disagree!) and the FTdx101D is looking increasingly like the solution...

Hello. After watching a youtube video on the subject I bought a Logitech mouse, model M325 (it also has the small orange star on the bottom of the mouse) and installed the small receiver that came wit

I have recently acquired a FTDX 101D with an M90 D Mic. I have been experimenting with the zillion settings available on the radio. Not yet satisfied ! For those owners who are FTDX 101D/MP users with

I have recently acquired a FTDX 101D with an M90 D Mic. I have been experimenting with the zillion settings available on the radio. Not yet satisfied ! For those owners who are FTDX 101D/MP users with

Anyone using the Commander to control the FTdx101D/MP? Ohil W8UV

I'm trying to use FT8 on a 101MP. I've set the power out at 100 watts. When I try to transmit, all looks well but there is no power output. I've gone over all the settings. I've read of this problem b

I spent what seemed like hours trying to get CAT control to work in WSJT. Finally, abt 0400, it worked. But I can TX but nothing shows up on the wsjt waterfall during Rx. I'm using audio codex 6 which

Dear all, My FTDX-101 MP purchased one year ago fails after pressing power on button. https://youtu.be/UXVMhesvdzI Seems to be a fault on the FPS101 power supply. There is no service manual for the FP

Today I received my € 100 cashback Thank you Yeasu -- 73JanPA4JJ______________________________________________________My dxspider clusters running 24/7 on a raspberry pi 2pa4jj-2 telnet 77.174.195.163

Bill would to care to tell kow well the Commander works with the rig? Phil W8UV

Hi guys I’ve discovered after upgrading to windows 11, that my audio cards Line and Speakers are not seen in various pc programmes anymore. In pc system devices they are showing up under Audio devices

I operate FT8 using the "PRESET" mode in the 101D's menu. This selects the ssb bandwidth of 50-2800 Hz or so. This seems to work well for me. On this forum I have read that other operators use the "DA