Just a quick post for anyone considering buying the Radio Today guide to the Yaesu FTDX101 or any of my other books. Amazon has announced big price increases on the printing cost of all books from 20t

HI I give the possibility to choose in the available cmd for the WATERFALL W/F FIX CURSOR CENTER and for each one 3 different possibilities (L) (N) (S)... FIX(L) FIX(N) FIX(S) CURSOR(L) CURSOR(N) CURS

I am currently running firmware version Main 'V01-23'. It came on the 101MP when I bought it from DX-Engr. I am able to SAVE MEM LIST and MENU SAVE with no issues to the SD card. No issues here. But I

I have figured out through trial and error, that when I plug the FTDX101D or FTDX10 USB into a PC, the PC creates two com ports. In my experience, the lower numbered of the two, is for RTS/DTS keying.

Hello There is a new version of Win4YaesuSuite. This release adds a high SWR alarm and speech speed for the visually impaired. There are a number of additional fixes which you can find in the release

Hi Folks, I wanted to see what this 70MHz band was about so I followed the steps to enter the radio into 70MHz/GEN mode. But when I did, the previous saved menu and Mem list saved to my SD card stoppe

Hello everyone, just a short question - where I do have a thinking problem: Is it possible to hear the audio when in CW mode at the Remote side? If yes, when I use a Contest Logger at the Remote-Side-

I find that B mode does not behave expected. The 101 manual described the following behaviour: 'releasing both sides of the paddle transmits the currently generated "Dash" side followed by a "Dot" sid

Well, at last I'm a few days from buying the radio from DXE. Have been following the posts here for a few months, but did not read anything pertinent to my question. The only options or accessories I

Attached is an amended version of Lou, W7HVs list of improvements for the FTdx101. Personally, I could live without many of them but there are about 15 items that are quite valid for a majority of own

It appears the TX GND terminal is shorted (grounded) , probably from nearby lighting strike Thinking about using the TX GRD terminal on the 15 pin linear as an alternative to activate 10 GHZ remote am

Why haven't there been any firmware updates for the FTdx101 since 2021 other than the one Main firmware update on 12/14/2022? Has Yaesu lost interest? It would be nice to have the TXREQ-GND low power

Since I posted a screen shot in the "Why no firmware updates?" thread, I've had several requests for access to the code of 101Cats, my FTdx101D CAT control application. I'm more than happy for people

Hi all does anyone know the current production date of the FTDX-101D ? 73 Spiros

I am trying to use IF OUT (main) for panadapter with an RSP1A and SDRUNO. is anyone successfully doing this? I have entered IF of 9.005 in SDRUNO, but rig frequency and SDR frequency in SDRUNO do not

On My IC-705 you can set a transmit delay so the RF out is delayed very slightly on the start of xmit. This is to prevent an SWR spike when switching external devices via the XMIT/GND port. I can't fi

I get to take my FTDX101D - and a bunch of other radio stuff - to Italy in July. Woohoo! Anyone have advice for flying? The actual radio is small enough it would qualify for carry-on but there'd be da

Hello, I just noticed that every time I turn on my FTDX101MP it is now in Fine Tuning mode. I can turn off Fine Tuning mode prior to turning of the radio but always when turning it back on the radio i

For those interested in building stuff themselves, I made a CAT driven bargraph display that shows all meters of the FTdx-101 at the same time (with a tune-button incorporated). Why? Just because you

Arrived yesterday. Spent several hours making settings, going over the manual. Put it on the air late yesterday... QRP 5W CW.. worked a couple stations in Europe. This is my new high-end QRP rig!. I k