That is easy check. Inject -73dBm, or 50uV, in your ANT socket, that should display S9 in your smeter. 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Bob Bruns <bobbruns@...

#problem

Art, please, Can you let us know your comparison between your Heil Proset and Beyerdynamic DT880 ? Thanks 73, Maximo

As far as I know, headphone's impedance is not important. They only use to split in two; high or low impedance. Regarding the headphones, my advice is to stay away from "ham headsets" and look for any

ALC is recommended NOT to connect it. Just PTT and RF are more than enought. Output power is regulated from radio's output power. That way is my Acom working for years, and before Acom Drake L7, with

My advice is to stay away from those "Ham Headsets", very expensive bad sound, and not conformtable at all, mainly those "Helicopter/Pilot" style. There are a couple of models, with a large time in th

Hi Jan, You can start here: http://www.nu9n.com/essb.html 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de ftdx101mp <ftdx101mp@...> Enviado: martes, 8 de febrero de 2022 12:39

Pedro, I can see now, you don't like eSSB at all !! Well, this is like CW/SSB, FT8, SSB/eSSB, Yagi/Quad, QRP/QRO, etc. There are plenty of options to spend our time, and our money. Some of us like eSS

Ola Pedro, I think your estatement on the interface is fully unrespecful. To say that about something you haven't tested it, for my understanding you are insulting every happy user, and all the people

Visita y registrarte mi nuevo canal en YouTube EA1DDO Ham Radio De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Pedro Madeira <pedro_transistor@...> Enviado: lunes, 7 de febrero de 2022 2

Gents, Rode NT1A is a large diafragme condenser mic, professional mic. It needs 48 VDC, called Phantom power. Only the Yaesu FTDx-9000 series has this feature, to be able to use this type of mic, with

That sounds bad advice to me De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de ray sylvester nr1r via groups.io <dxhogg@...> Enviado: lunes, 7 de febrero de 2022 11:49 Para: FTDX1

Hi John, First, you need any type of "mic preamp", this will provide the phantom power supply for the mic, and will allow you to do some adjustments to your mic as; mic gain, output. Average mic pream

Have you tried Full reset ? 73, Maximo

You need to select MAIN and/or SUB in the radio´s menu. You can send MAIN on left channel, and SUB on right channel. Then you need to configure WSJT to use left or right (or MONO) channels input. 73,

Franco is talking about his own software for FTDx101 series, NOT a new firmware. 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Ken - K4XL <grimm@...> Enviado: miércoles, 29 d

You can use a SDR Online to monitor your signal. You will see how your real signal looks like. 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Macy monkeys <macymonkeys@...

If you see your signal at both sides during USB/LSB then you need to adjust your mic gain, AMC and PROC. 73, Maximo EA1DDO

You need to pay attention to the bandwidth on screen during Tx, because it is different than Rx. I meant, you can keep 50K on Rx, but during Tx it will change to something else. I use to keep waterfal

Hi Ludovic, Please, Can you let us know what have you seen on the bottom end? Is the bandwidth down to 50 or 100 Hz ? Thank you 73, Maximo

Hi, Yes, that is true. It is a known issue, already reported to Yaesu. Hopefully, Yaesu will fix it at some point, with a new firmware. You can check next video out: https://www.youtube.com/watch?v=30