Some people, instead of enjoying this supperb radio, with best Rx specs ever, they act as "beta testers", looking for the minimum thing to start complaining about. To report an issue is ok, but when t

I do remember to read here something regarding a hardware update, weeks ago. De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Matt Wells <m0vpl@...> Enviado: martes, 6 de abril de 2021 12

Hi Harry, Sure, I feed my audio pro modules line level to the FT Dx-101D, using a box called Golden Maxima: http://goldenmaxima.ea1ddo.es/Adapter_eSSB.php 73 De: FTDX101D@groups.io <FTDX101D@groups.io

Hi Morgan, all, Apologies for the late reply, but we had the CQWPX contest last weekend and you know... NCC2 is quite remarcable piece of hardware, indeed. But that is the only way when using analogic

Apologies Franco, my post was not a response to yours, just a general reminder for anyone who need it. In my case, I use both receivers with different antennas. Would be good to implement (in future r

if you have a signal (from an antenna) and you need to feed two different receivers, you need to split 50/50 (using a splitter). Those 50% means 3dB. Both receivers will get same signal 3dB less than

Hi all, Just to share a short video showing the FTDx-101D running both receiver at same time, one horizontal dipole and second vertical dipole. YouTube stereo audio keeps main receiver on the left cha

I understand you need two antennas, one on each receiver, same band/frequency, then SYNC “mixes” signals from both antennas/receivers. That feature is sometimes called “diversity”. Is like that? 73, M

That video shows two or three different jobs. First job was to fix a front knob. Then to replace a chip. Last part of the video was to install an optional filter. From minute 5:15 As you can see, it i

As far as I know, those filters are not a difficult task. You need to remove bottom radio's cover, then you will see both Rx boards, side by side, with default filters already there, and the free mark

Some people is doing that at home, themselves. I've done myself the second VC-Tune installation too. 73, Maximo Visita y registrarte mi nuevo canal en YouTube EA1DDO Ham Radio De: FTDX101D@groups.io <

I think you need to build an bespoke interface. Perhaps an Arduino is enough, to read the CAT messages and act a relay output when Antenna 2 message is received. A different approach... If you use Ant

You can assign ANT1 to VFO1 for TX and Rx, and ANT2/ANT3 to VFO2 for Rx.

As far as I understood, AMC is the "Input gain" and PROC is the "Output gain" of the audio processor engine. For best linearity results, AMC should no be set above 50. Unfortunatelly, I fon't have any

You need to understand that brand use to sell models specific for every market or area. Perhaps, a specific model is market in US and not in EU, but you can found opposite and a model marketed here is

What's the difference? You pay for an item, they send it to you. Done. If it's coming from here, there or Japan, doesn't matter. (Confirm final price). Am I wrong? 73, Maximo De: FTDX101D@groups.io <F

I heard a rumour about a new big yaesu. Something to replace the FT Dx-9000 series, using FT Dx-101D technology. Let's wait and see... 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre

Yamaha CM500, in UK https://www.amazon.co.uk/Yamaha-CM500-Headset-Built-Microphone/dp/B000BZ6ZX0 https://www.ebay.co.uk/itm/202735279356 73, Maximo M0HAO De: FTDX101D@groups.io <FTDX101D@groups.io> en

You buy a 8pin connector, then identify the mic, audio and ground wires from the headset. Here you are ready to solder every wire on the correct connector's pin. Job done. Are we amateur radio, isn't

I use Sennheiser HMD 280 Pro https://fr-fr.sennheiser.com/casque-micro-live-broadcast-controle-studio-tv-hmd-280-pro 73, Maximo