I found out - with no apparent solution - that the Winkeyer would not (RF) key the rear CW jack but would work properly with the front CW jack on my FTDX-101D. Because a manual key (J-38) would work w

As a Mac user from sometime in the 90's, I use Aether (aka AetherLog) which does not insist on consuming a lot of screen real estate. It interfaces to a wide range of radios and uploads to eQSL and Lo

I too suggest using (making) a simple BAND DATA cable.

PSK31 if not affected by the choice of LSB or USB - either work.

I don't know if your issue and mine are similar but early on, I discovered that I could not key the rear CW port with a WinKeyer while everything works as expected using the front CW port. Perhaps try

Thanks Rejean - working very well now!

Yes, the roofing filter is at 3 kHz and the width control is also set at 3 kHz.

Clearly, I've set something incorrectly. When in DATA mode (DATA-U) and with the corresponding LCUT FREQ set to OFF, I am really not receiving any signals lower than 500-600hz and the waterfall view c

Steve When you tire of having to turn the Quadra on to get to an antenna, do what several of us have done and build your own BAND DATA 1 cable.

If I had one, it's completely MIA and I'm trying to get set for next weekend's RTTY contest. 73 & Thanks

For programs (apps) that don't explicitly support the FTdx-101, I've found that choosing FTDX-5000 works "well enough"

Let me another another of what I believe is a bug, though minor. After the latest update, I noticed that the code sent with the internal keyed sounded bad, as if the weighting was off. I changed the C

Just wondering - does this occurs with both CW ports (front & rear)? I've had trouble with the rear CW port on my radio not accepting keying from an external keyed (Winkeyer USB) which also defies log

Working from the assumption that JS8CALL and WSJT-X are pretty much the same code in this area, here's what works for me: FTdx-101 MENU GENERAL CAT RATE 38400 CAT TIME TIMEOUT TIMER 1000 TX GENERAL VO

I thought the following fix item #4 might have been related to your issue: "4. When CW keying speed is 45 wpm or more, QSK DELAY TIME (time setting from the transmit operation to actual transmission o

The answer turns out to be similar to the FTDX-5000's setting: Set MODE PSK/DATA : DATA SHIFT equal to the value of MODE RTTY : MARK FREQUENCY or as close as possible. In my case, I set DATA SHIFT to

Not much actual information regarding the transciever interface in the amplifier manual. Looks like the easy pat is to obtain the MFJ DB-DB15Y cable.

I wish to use DATA-L for RTTY since this would be a good weekend to try this. I know it's an old convention but most RTTY and PSK DX Cluster spotting has been with reference to the MARK frequency on t

Correct - I'm using a stereo plug wired per the manual.

My "chat" with Yaesu today went about as well as I expected. They and the radio have no problem. I could not extract an answer to why the sidetone sounded OK when the RF carrier was full key-down. The