So true, so true. And both funny....and kind of sad. But SO TRUE! -- 73, K4TK/Tim Titus, AL

In the time it took to read Tim’s response, my IC-7300 would have been unboxed, on the air with perfect audio…and have three QSOs in the log ;) That said, I, too, have spent HOURS (and DAYS)

Wow, that was a lot of info. Just checked band plan. Unfortunately, 7.168 is out of General region. In process of upgrading. Hope to take test soon. Thanks for that detailed

hours of monitoring signal on both the scope on the radio, another radio in the shack using a dummy load for antenna and watching signal while making adjustments, and working for many hours on 7.168

Hi Tim, curious what tests you did to arrive at your settings. In previous threads, people have been unsure what AMC does. Seems consensus is like an AGC circuit to prevent peak

Ahhh...but 40 on AMC keeps my signal super clean, even running close to legal limit. As I said, my tests showed I had to take mic gain to 70 on my Heil mics to get adequate power and audio levels

Yes, RFG control is necessary with AGC=off otherwise there can be a large amount of distortion. Unfortunately when trying to optimize best s/n on a weak signal AGC= off and adjusting the RFG works

like was mentioned by others on here, part of it depends on your AMC setting. I have my AMC set very "restrictive", as in a 40. That gives me VERY clean TX signal....but also means I have to turn up

Hell Michael, It is strange that this very basic filter is specified at 1.2KHz from BP ... I had bought one that I had measured and of course opened to find out ... Nb. When using this filter, the

Thanks for the info. -- Barry Jacobson WA2VIU bdj@... @bdj_phd

https://www.mars.af.mil/ They use frequency's just out side of the US Amateur Bands, the MARS mod removes the out of band TX limit, and allows TX everywhere. Some want this for better operational

Seems like we're talking about two different things, the beneficial used of the RF Gain control and the rig locking up. The rig shouldn't lock up no matter, so that's a bug. In my experimentation,

You can get good idea of what it will sound like by selecting the 3kHz filter and turning the WIDTH control to 1200 Hz. That sets the width if the IF DSP filter at 1200 which has steeper skirts that

Le 25/04/2021 à 22:37, DM4YY@... a écrit : You will increase the resistance of strong sigs in particular condition (contest / pile up). If you never have problem when there

Hello YL s and OM s, my question is if someone has the Yaesu XF-128SN SSB filter installed in his Yaesu 101 D / MP transceiver and can share experience report, whether this filter brings what or the

I've seen that behaviour with the previous Fw too. It was always like that. Not a new thing. 73, Maximo De: FTDX101D@groups.io <FTDX101D@groups.io> en nombre de Franco <hb9oab@...> Enviado:

AGC OFF depending the signal + noise floor, this is possible to overload the SDR receiver and going to a lock-up situation not able to calculate. To be careful AGC OFF only for very weak signals

There's a you tube video of someone doing just that on and FTDX10 - - - https://www.youtube.com/watch?v=LTByL1rmQdQ

Perhaps related, but DNR level 1 caused very bad distortion on big CW sigs with 202004. 202104 fixed it, and I find DNR to work much better overall on CW. With 202004, I just didn't use it as it

Yeah. I heard this was true (shorting the pads while doing a hard reset), but haven't tried it. .