The amp 15pin you can ground 2 pins and will send a carrier which is adjustable power in the menus. VA3AQB 🇨🇦 Alan

Hi Rick The only solution I see right now will be to select AM mode that got its own RF power memory settings 25 or 50 w maximum (D or MP) or lower saved with mode control. There is no low power tune

I currently run an IC-7610 along with an Acom 1200S amp and Acom 04AT tuner. There is a momentary pushbutton on the amp which initiates a TUNE cycle in which the amp sends a CAT command via a cable

Got passed that now. I’m normally very good with computer stuff. Now to just figure out how to start it lol I selected com port baud etc How to start it running. Sorry Franco what am I missing

Thanks Rejean - working very well now! -- Harry K7GQ

Hi: Just tested 1,2khz filter during the last CQWW, it works really good, the receiver comes very selective and help a lot to avoid the adjacent near signals, the DSP filters used at 2.0khz. So, for

Hi, Yes it's strange this choice of BP roofings * The first problem is that nobody seems to have produced intermediate filters, bandwidth between 1.8 to 2.3KHz ... and our usual manufacturers do

My guess. A d a very eli5 explanation of this guess. The roofing filter has something like 30db attenuation out of its band. Increasing to that as you get further from the 1.2 head. So even though

Yes this is odd, we cannot receiver wider than the first stage roofing filter. Down conversion receiver roofing filter near 9 mHz has a narrower skirt over old up conversion for the same roofing

Hi AGC at off, this looks like you excided the maximum SDR converter signal, to be careful with that damaging some circuit. Lock-up is the last defense level,,, AGC Off to be used with extreme low

I agree it seems odd but with the 1200 roof and dsp at 2700 the received audio is thinner but quite listenable and it appears adjacent interference is reduced. Ideal in the middle of an SSB contest.

Sorry. But I may be misunderstanding this. If the roofing filter is at 1200. How is having the dsp filters wider then that going to achive much. I'll look at your QRZ page. But would absolutly love

Hi all, I have the 1200Hz filter in my FTdx101D rig. I use it rarely but I have just carried out an experiment. I tuned 2 kHz away from a loud signal and splatter was S9 plus 10 dB (!) with 3 kHz

Hi Alan, I think you have a problem. If I click on the link http://radioclub.no-ip.org/ftdx101cat/ftdx101_cat.zip or http://web.ticino.com/wlog2000/update/ftdx101_CAT.zip the download start

Yeah that my guess as well. Id love to hear someone who has the 1200. But for ssb it seems utterly useless. Some wider then 600 digital modes sticks me as the only possible use for it. If I radio

Salut Régis I really think it's not worth it. In my personal opinion, if you set the R.FIL to 600Hz or 3000Hz or if you move the 1200Hz to SSB only with WIDTH you can already have a personal

Hi John has disappeared these days ... I just wrote to his "sysop" but for now no info. 73 Franco http://www.qrz.com/mycall

Does anyone know what happened to the 101MP group? Has the 101MP io group been dissolved? Tks, John WA4AIP ARRL Charter Life Member Sent from my iPad PRO

Hi, Radio Setting / PSK/Data shift 1500 Hz & USB (DATA-U) and nothing ON for DNR,DNF,NOTCH, CONT. 73, Rejean, va2am

Yes, the roofing filter is at 3 kHz and the width control is also set at 3 kHz. -- Harry K7GQ