Take a few minutes read the first few pages on the front panel buttons. you sound frustrated

Agreed. Inappropriate Jack, he was trying to help you. KM5L

Fascinating....and surprising, at best. And they want $75 for a simple straight through DB15 and RCA cable.... Not for me!

Steve When you tire of having to turn the Quadra on to get to an antenna, do what several of us have done and build your own BAND DATA 1 cable. -- Harry K7GQ

Steve Indeed, that is what I read in the manual also. Dirk on4ct

i made a cable that connects the ftdx101mp to band data 1 and alc 1 on the quadra . that way the amp can stay off and feed thru as long as the v/p 1000 is switched on from the front panel

Just received my 101d after owning and running the FT2000 for nearly 23 years with the Quadra. Am I wrong in concluding the connection from the 101d to the Quadra can be a simple "straight thru"

Hi Also if you recorded a message you then can analyze it with the AF-FFT your frequency voice peak during the transmission. One way to see what the equalizer does. Off voice subject, there are many

Jack, if you select "MULTI" you will see an oscilloscope on the left and AF-FFT on the right, as well as the waterfall above it. When you transmit, those waveforms will reflect the transmitted audio.

Thanks for the non-reply. I take it you don't have a clue about the question. Hopefully someone else will. 73 Jack KZ5A

bottom of the screen are 7 screen modules to play with

I've only had this radio a few days so probably missing something.... Anyway is there a way to "manage" the TX screens? Mine switches to big audio scope and no second meter on alternate

Mike No it doesn't, I HAVE tried it. Even with the monitor level on "11" SSB yes, CW no 73 Fred

I use OBS to livestream. In SSB using MONI on the 101D, the viewing audience can hear both my radio and my microphone, however in CW, they can hear the radio, and they can also hear me sending CW

Hi, No push on the vox -- 73' Rien PA7RA

Fred, I have not tried it but if you put MONI on to get the sidetone from the 101, I would expected what I hear on the headphones to come out of AF Out. In which case you would either get received

Mine included just behind keep airflow moving VA3AQB 🇨🇦 Alan

Thanks very much. that seems to work. I appreciate the help very much! What part of italy are you from? My grandparents were from the Naples area. A town called Baia Latine .

If in doubt to call them with your serial number, there was a hardware I think and also a software review to fix this noise or vibration for the D model at low fan speed. Problem not seen on MP

Hi you got 2 choices, TX ground to key or the band data Tx ground goes through a mechanical relay (10-15 msec) then you need to add your amplifier delay 10-15 msec. If you could setup RF output at 30