Hmmmm... seems the OP (NR1R) deleted his original post.

Not a bad idea. Found this which I had downloaded long time ago, but forgot. -- Barry Jacobson WA2VIU bdj@... @bdj_phd

I use SDR Console with the FTDX101 along with a SDRPlay RSP1 connected to the rx out on the rig. The whole setup works with Omnirig, my logging, WSJT and whatever else I want to run. Can open 4

Angel, I plug a monitor and mouse into the radio, and use that as a panadapter. No need for a computer and software. To me, that was one of the benefits to this radio. Good luck, Joe K1VW

I’m using SDR Console v3 with OmniRig on my FTDX-101D to allow me point and click freq changes, mouse scroll and the much nicer spectrum/waterfall/pana display from my SDRC V3 / Hermes Lite 2 - fed

Hi I would suggest you to download Yaesu Ftdx101 literature from files including the block diagram from their site and you will get all your answers. About audio performance this is all about

Hi N2YWL.... " I'm looking to see if I can using any of these applications to manage and view the ftdx101d receiver using this application spectrum scope? " Exactly what applications are you referring

Not sure there is such thing as an "optimum" DNR setting. It would all depend upon YOUR conditions, noise levels, signal strengths, etc. I adjust mine quite often, depending upon conditions at the

Hi Folks, Please looking for help. I'm looking to see if I can using any of these applications to manage and view the ftdx101d receiver using this application spectrum scope? I'm not interested in

Have SDRplay RSPdx to connect to RX OUT (Main) on back of "D". What experience does one have that can recommend which software works best? The SDRplay or HDSDR, both using Omni-rig for control of

I forgot to add that by doing that it makes it so much quieter. Normally on any other radio I would turn on and hear the noise and shut it back off because I don't want to hear it. With the 101d and

I love the VC Tune. I use it in combination with the rf gain on 80m. If the band is noisy (storms and even local interference) i turn the VC Tune ring to the left till it about a quarter in from the

While the FTDX101 is marketed as a hybrid SDR, I believe this refers to the band spectrum display. There are some advantages to sound quality in analog receivers because the digitizing process

Hi Ludovic, Please, Can you let us know what have you seen on the bottom end? Is the bandwidth down to 50 or 100 Hz ? Thank you 73, Maximo

Hello, look at the spectrum of the FTdx101 emission (on a websdr or other tranceiver for example) and you will see that : If you set

Yes, but how often is that really a problem with a radio with 107 dB of close-in dynamic range? 73, Scott K9MA

As said before, some apps like also Logger32 Log Software work with the old Controller! 73

Don’t know about suggestions, but I do know it works, and I use it on 80 a lot. Watch the noise spikes move on the bandscope. K5FUV Sent from AT&T Yahoo Mail for iPad

Be sure the mic is set to rear. Sometimes I change back to front and forget, and no power out. K5FUV Sent from AT&T Yahoo Mail for iPad

Look at program settings the audio, soundcard In-Out !!!! For some reason sometimes the windows go to the default sound card.