Thanks for the info. I have the S18 on its way. I will test it when it gets here, then send in the SDA 100 for an update as required. Quick service? BTW, I have never used HRD, but it seems it gets

Actually, it is true diversity reception. You can separate the two receivers as John and I do, or you can use the menu and set to audio to feed both receivers into a mono audio line. That may be more

Forgot to say, there are more than one "Diversity". It could be; spatial diversity, frequency diversity, polarization diversity, phase diversity, etc. Further reading;

I refer to this a perversity reception using a software defiled radio.

Well, excuuuuuse me :) John K7FD

Diversity is that; 2 receivers with two different antennas, and a commuting process to select the one offering best receotion. That is Diversity. It is in use for years on VHF repeaters, for

This is not Diversity reception Only RX with 2 receiver + 2 speaker. If you have Diversity reception receiver you will see new world 😊 Like Anan Transceiver have real Diversity reception RX. De

Hi Josè it seems it’s a mess, anyway I suggest you to have a look to FC-40 diagram maybe it helps. A friend of mine did some fast temptatives in the past but no good results were reached….then he

Try asking SteppIR for a transceiver interface swap by mail to avoid having to send the whole unit in. Let them send you a good interface first to avoid having to open the SDA100 twice (wishful

Hello, Need to connect a generic ATU (N7DDC 1000W) to the FTDX101D, the ATU's existing pins to force the TUNE manually are: a.- TX Request b.- GND c.- /TX Request Based on other tuners i.e.

Howard is correct, I had to send my unit in for an update. It would not track, it now does. Be sure to tell them NOT to reset all. They did and did not ask me. I wound up having to reset all the

I'm not sure if I'm correct but I believe the SDA100 transceiver interface needs a factory-only firmware update as there was an incompatibility issue with the FTdx101. I connect through a dedicated

You need 21-6018-01. I have downloaded the entire interface cable page for you as an image and attach it here - hope this helps. 73, John

I believe you want S18. This is from the compatibility chart on the Steppir website (https://consumer.steppir.com/shop/parts/controllers/transceiver-interface-cable/): 73 Fred K3FRK

I have the SDA 100 Controller for a Steppir antenna. I think I need a new Cable to connect to the FTdx101d. Does anyone know which one, and if there are any other considerations? Ken K5WK

We (HRD Software) have that one. It's track here (there are duplicates on it; just don't want to create more duplicates of the same bug

I found yet another bug. Now when you print sheet labels, i.e. Avery 5160, you can no longer change the starting row or column. It always prints the 1st row, 1st column. I've told tec. support about

I’m no longer a hardcore DXer or contest nut but have found two receivers very entertaining during my casual CW ragchews. I use the ‘separate’ setting on my headphones and then sync Main and Sub

IMHO, the Inrad headset is the best choice by far. I've owned them all. Heil sounds good but are poorly constructed. I would never by Heil again.

I have one of the Radio Sport headsets with the boom mike. Very well built, it almost looks like a David Clark headset, and it's very comfortable. Not cheap, but why cheap-out with a $4k radio. 73,