Date   

Re: FTDX101MP overshoot

Fernando EC1CT
 

NO...Got one connected to Acom 2000A amplier and no problems with overshoot so far.
73
EC1CT Fernando
 
 

From: Roberto
Sent: Monday, March 1, 2021 2:28 PM
To: FTDX101D@groups.io
Subject: Re: [FTDX101D] FTDX101MP overshoot
 
Dear Gents,
 
The question is very simple ...
 
Does the MP version have any ALC Overshoot question Yes or NO.
 
Please do not refer to the document what Yaesu released on the D version. The question is if the MP version also had or still have this ALC overshoot problem ?
 
That's all
 
Ofcourse persinal expeeiences of MP users are more then welcome following this topic.
 
Thanks in advance
 
73 Roberto PB5X
 
 
 
Verzonden vanaf mijn Samsung Galaxy-smartphone.
 
-------- Oorspronkelijk bericht --------
Van: F5PNI <f5pni@...>
Datum: 01-03-2021 13:34 (GMT+01:00)
Aan: FTDX101D@groups.io
Onderwerp: Re: [FTDX101D] FTDX101MP overshoot
 
Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73

Libre de virus. www.avg.com


Re: FTDX101MP overshoot

Tom Lewis
 

The serial number for my MP is 1C220008.

My FTdx101D is for sale and since I still have it I checked it too. 
Its serial number  9G030181 and has the same version of firmware as my MP.
It shows no overshoot. I can post the pictures if needed.

73 Tom, N4TL


Re: Mouse Control

Jaime Perez
 

The mouse I have tried were not bluetooth only wireless and I have plug them with the 101 OFF, the good one the M187 you can plug it with the rig ON not problem.
Thanks.
Jaime, EA6NB.


Re: Mouse Control

TOM - K2TC
 

Hi Jamie –

My Logitech M310 works fine on my 101D

 

73’s,

Tom, K2TC

 

From: FTDX101D@groups.io <FTDX101D@groups.io> On Behalf Of Roger Hartel
Sent: Monday, March 1, 2021 9:24 AM
To: FTDX101D@groups.io
Subject: Re: [FTDX101D] Mouse Control

 

I found that it was necessary to install the USB Bluetooth adapter when the radio was powered down.

The adaptor would then be discovered on power up, and the mouse would work fine.

 

On Mon, Mar 1, 2021, 6:52 AM Jaime Perez <ea6nb@...> wrote:

I have tested also with the 101MP two others Logitech wireless mouse, M185 and M325 and neither works with the rig both goes well with any PC. To use a mouse with the 101 is quite practical, that I always use for everything is in the screen and also with the menus you just keep the screen clean and use the mouse at about 50 cm not the same with an IC-7610 only play in the spectrum display. I will have the new M187 next Friday and will post if it works the same as the one I use.
73, Jaime, EA6NB.


Re: FTDX101MP overshoot +101D

Rejean Leveille
 

Hi,
same group for D & MP model.
This overshoot problem was reported back in June 2019 and at that time some radios were sent back to Yaesu CA and UK for a modification, also a software review later.
Some doubts to contact Yaesu's support line with his serial number,,,

73, Rejean va2am


Re: FTDX101MP overshoot

Jan <l32beta@...>
 

Thanks Tom. Could I have the serial number
You may contact me by direct email: pa4jj at pa4jj.nl


Re: FTDX101MP overshoot

Tom Lewis
 

Hello,                                                    March 1, 2021


I bought Yaesu FTdx101D 14 months ago. I like it so much I bought an FTdx101MP about a month ago.


I tested the MP for overshot on the first CW character.  I used a Tektronix TDS2012B oscilloscope. The radio is connected to a dummy load. I put a T connector in the cable so I could capture the signal on the scope.


I took four pictures on my cell phone and posted the pictures to QSL net. The trace show no overshoot.


Here are the locations of the pictures.

https://www.qsl.net/n4tl/2021-03-01-Yaesu-FTdx101MPpix1.jpg

https://www.qsl.net/n4tl/2021-03-01-Yaesu-FTdx101MPpix2.jpg

https://www.qsl.net/n4tl/2021-03-01-Yaesu-FTdx101MPpix3.jpg

https://www.qsl.net/n4tl/2021-03-01-Yaesu-FTdx101MPpix4.jpg


73 Tom N4TL


Re: FTDX101MP overshoot

Roberto
 

Ok merci.

73 Roberto



Verzonden vanaf mijn Samsung Galaxy-smartphone.

-------- Oorspronkelijk bericht --------
Van: F5PNI <f5pni@...>
Datum: 01-03-2021 15:40 (GMT+01:00)
Aan: FTDX101D@groups.io
Onderwerp: Re: [FTDX101D] FTDX101MP overshoot

Hi Roberto,
No ALC overshoot problem on the MP version

Best 73


Re: FTDX101MP overshoot

F5PNI
 

Hi Roberto,
No ALC overshoot problem on the MP version

Best 73


Re: Mouse Control

Roger Hartel
 

I found that it was necessary to install the USB Bluetooth adapter when the radio was powered down.
The adaptor would then be discovered on power up, and the mouse would work fine.

On Mon, Mar 1, 2021, 6:52 AM Jaime Perez <ea6nb@...> wrote:
I have tested also with the 101MP two others Logitech wireless mouse, M185 and M325 and neither works with the rig both goes well with any PC. To use a mouse with the 101 is quite practical, that I always use for everything is in the screen and also with the menus you just keep the screen clean and use the mouse at about 50 cm not the same with an IC-7610 only play in the spectrum display. I will have the new M187 next Friday and will post if it works the same as the one I use.
73, Jaime, EA6NB.


Re: FTDX101MP overshoot

F5vjc
 

Hi Sylvain, yes thank you I have received your photos and email.
I will be able to locate the resistor with this help, much appreciated.

73, Denis F5VJC

On Mon, 1 Mar 2021 at 15:10, 33 73s via groups.io <f6cis_ep=yahoo.fr@groups.io> wrote:
Hi Denis,

Did you rxing my two email ?

73s Sylvain F6CIS

Le lundi 1 mars 2021 à 14:58:24 UTC+1, F5vjc <foxfive.vjc@...> a écrit :


Bonjour Jean Gabriel, I am looking for the information on the Hardware modification, I understand it is to change only one resistor SMD.

Merci, 73
Denis F5VJC

On Mon, 1 Mar 2021 at 13:34, F5PNI <f5pni@...> wrote:
Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73


Re: FTDX101MP overshoot

33 73s
 

Hi Denis,

Did you rxing my two email ?

73s Sylvain F6CIS

Le lundi 1 mars 2021 à 14:58:24 UTC+1, F5vjc <foxfive.vjc@...> a écrit :


Bonjour Jean Gabriel, I am looking for the information on the Hardware modification, I understand it is to change only one resistor SMD.

Merci, 73
Denis F5VJC

On Mon, 1 Mar 2021 at 13:34, F5PNI <f5pni@...> wrote:
Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73


Re: FTDX101MP overshoot

F5vjc
 

Bonjour Jean Gabriel, I am looking for the information on the Hardware modification, I understand it is to change only one resistor SMD.

Merci, 73
Denis F5VJC

On Mon, 1 Mar 2021 at 13:34, F5PNI <f5pni@...> wrote:
Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73


Re: FTDX101MP overshoot

Barry D. Jacobson
 

I think this attached document is it.

--
Barry Jacobson
WA2VIU
bdj@...
@bdj_phd

On Mon, Mar 1, 2021, 5:37 AM F5vjc via groups.io <foxfive.vjc=gmail.com@groups.io> wrote:
Sylvain, please can you tell me where to find info for the Hardware mod on the FTdx101D.

Thanks, 73 F5VJC

On Mon, 1 Mar 2021 at 08:47, 33 73s via groups.io <f6cis_ep=yahoo.fr@groups.io> wrote:
Yaesu issued a doc June 18, 2019 with the list of FTDX-101Ds affected by overshoots in issue (attached doc).

If your 101D dates from the first production series, you will of course have to install the update on the FW side.
You will also need to make the modification on the HW side. Yaesu (if under warranty) or a good tech can make this modification easily (it only has a small SMD resistor to replace).
I made the modification myself on my 101d, it takes me less than 30mn!

If your device is under warranty, your best bet is to contact Yaesu.

Nb. Essential modification if you use LDMOS SSPA for example ...
LDMOS do not support overshoots ...

73s Sylvain F6CIS


Le lundi 1 mars 2021 à 08:23:43 UTC+1, Rasika Liyanage via groups.io <vk2qv=yahoo.com@groups.io> a écrit :


Rejean, I have 101D with FW MAIN VO1-14. But i still have the overshoot problem on all HF bands. May i know when and under what FW it has been fixed please?

Thanks


Re: FTDX101MP overshoot

Roberto
 

Dear Gents,

The question is very simple ...

Does the MP version have any ALC Overshoot question Yes or NO.

Please do not refer to the document what Yaesu released on the D version. The question is if the MP version also had or still have this ALC overshoot problem ?

That's all

Ofcourse persinal expeeiences of MP users are more then welcome following this topic.

Thanks in advance

73 Roberto PB5X 



Verzonden vanaf mijn Samsung Galaxy-smartphone.

-------- Oorspronkelijk bericht --------
Van: F5PNI <f5pni@...>
Datum: 01-03-2021 13:34 (GMT+01:00)
Aan: FTDX101D@groups.io
Onderwerp: Re: [FTDX101D] FTDX101MP overshoot

Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73


Re: FTDX101MP overshoot

Barry D. Jacobson
 

Sorry if this was sent by someone else. Had just woken up and didn't see whole thread.

--
Barry Jacobson
WA2VIU
bdj@...
@bdj_phd

On Mon, Mar 1, 2021, 5:58 AM Barry Jacobson <bdj@...> wrote:
I think this attached document is it.

--
Barry Jacobson
WA2VIU
bdj@...
@bdj_phd

On Mon, Mar 1, 2021, 5:37 AM F5vjc via groups.io <foxfive.vjc=gmail.com@groups.io> wrote:
Sylvain, please can you tell me where to find info for the Hardware mod on the FTdx101D.

Thanks, 73 F5VJC

On Mon, 1 Mar 2021 at 08:47, 33 73s via groups.io <f6cis_ep=yahoo.fr@groups.io> wrote:
Yaesu issued a doc June 18, 2019 with the list of FTDX-101Ds affected by overshoots in issue (attached doc).

If your 101D dates from the first production series, you will of course have to install the update on the FW side.
You will also need to make the modification on the HW side. Yaesu (if under warranty) or a good tech can make this modification easily (it only has a small SMD resistor to replace).
I made the modification myself on my 101d, it takes me less than 30mn!

If your device is under warranty, your best bet is to contact Yaesu.

Nb. Essential modification if you use LDMOS SSPA for example ...
LDMOS do not support overshoots ...

73s Sylvain F6CIS


Le lundi 1 mars 2021 à 08:23:43 UTC+1, Rasika Liyanage via groups.io <vk2qv=yahoo.com@groups.io> a écrit :


Rejean, I have 101D with FW MAIN VO1-14. But i still have the overshoot problem on all HF bands. May i know when and under what FW it has been fixed please?

Thanks


Re: FTDX101MP overshoot

F5PNI
 

Hi F5VJC,
I can send you overshoot release document information, but you need, if your transceiver is in the serial number list from YAESU information, like Sylvain send it up, and if you don't make the last update, make the specific update with overshoot release.

Best 73


Re: Mouse Control

Jaime Perez
 

I have tested also with the 101MP two others Logitech wireless mouse, M185 and M325 and neither works with the rig both goes well with any PC. To use a mouse with the 101 is quite practical, that I always use for everything is in the screen and also with the menus you just keep the screen clean and use the mouse at about 50 cm not the same with an IC-7610 only play in the spectrum display. I will have the new M187 next Friday and will post if it works the same as the one I use.
73, Jaime, EA6NB.


Re: FTDX101MP overshoot

F5vjc
 

Sylvain, please can you tell me where to find info for the Hardware mod on the FTdx101D.

Thanks, 73 F5VJC

On Mon, 1 Mar 2021 at 08:47, 33 73s via groups.io <f6cis_ep=yahoo.fr@groups.io> wrote:
Yaesu issued a doc June 18, 2019 with the list of FTDX-101Ds affected by overshoots in issue (attached doc).

If your 101D dates from the first production series, you will of course have to install the update on the FW side.
You will also need to make the modification on the HW side. Yaesu (if under warranty) or a good tech can make this modification easily (it only has a small SMD resistor to replace).
I made the modification myself on my 101d, it takes me less than 30mn!

If your device is under warranty, your best bet is to contact Yaesu.

Nb. Essential modification if you use LDMOS SSPA for example ...
LDMOS do not support overshoots ...

73s Sylvain F6CIS


Le lundi 1 mars 2021 à 08:23:43 UTC+1, Rasika Liyanage via groups.io <vk2qv=yahoo.com@groups.io> a écrit :


Rejean, I have 101D with FW MAIN VO1-14. But i still have the overshoot problem on all HF bands. May i know when and under what FW it has been fixed please?

Thanks


Re: FTDX101MP overshoot

Rasika Liyanage
 

Thanks for the document. Serial # on my 101d is 0G150016. I bought it June 2020.

4501 - 4520 of 11003