Ken, Good to hear. Yes , in many tuners there is often a sweet spot of signal strength. Once the tuner is fully quieted on the station of interest, additional signal strength can sometimes creates

Neglected to mention that our 'old' compressor/heat pump (heat pump not used) unit and replaced inside unit were both Lennox and trouble-free for 30+ years. Glenn

The Bryant system we installed a few years ago has been faultless and the programmable control system is great. While it will likely last us into our dotage (are we there yet?), if we needed another I

I put in a high efficiency 2 stage American Standard furnace (Same as Trane) and 3 ton AC unit about 10 years ago here in Chicago. Have had only 1 problem. Thermistor failed on the blower motor about

Hi Herb I purchased and installed the attenuator and it works! Certainly less noise and the signal is cleaner. I still do have to adjust my antenna direction for best results, but just wanted to

Too bad Magic Touch didn't tell us about Lennox ...

The advice you are getting here is good. Parts availability and reliability are key, and varies by ‘generation,’ that is, era. I replace a Trane 2.5 years ago. My contractor sells many brands and

Hi Bob, Just this weekend I replaced both, the furnace was from 1979 and the AC from 1975! I'm not so sure on the Furnace, but the AC was definitely that old. The Furnace is an 80k BTU and the AC was

Hi Bob, Replaced our home's unit [FHA/AC] about a decade ago, Trane, med-eff [no fancy air plumbing], variable speed, two stage unit... has been ultra reliable and very reasonably quiet in

I don't know where you are located, but I can offer the following: (keeping in mind that free advice is worth what you pay for it) It is my understanding that "high efficiency"

Hi- I'm poking around hoping to find a Fisher R-200-B. Doesn't seem to be a common item but thought I'd ask. Good luck with the spring cleaning.

Anyone have good or bad experiences to share with newer installs of forced air gas heaters with AC? Mine unit works, but is 33 years plus old, so replacing. Boy has inflation hit these this year -

Thanks Jim. I may be able to ship stuff later, but for now just clearing thinks to make room, which means not all stuff is perfectly aligned, but it all works. If not, won't sell it - it's free or

looks to have all the right stuff - never heard of it though. I wonder if it's solid state?

I bought a Sansui receiver from Bob recently. He knows his stuff and the unit is pristine. I was most satisfied with the purchase and highly recommended him. R/ Jim From: FMtuners@groups.io

Hi. Pleasae note that it seems the difference between 911 and 911A, is that the former is FM only and the latter AM/FM. In the notes on tuners on FMtuners website, the difference is thought to be that

Hi All; If anyone is willing to pickup gear locally, I am currently doing a minor clean of the basement, and would be willing to sell, or even give away items for less than 1/2 what you normally would

Hello Lucaa, must admit I didn't know this tuner or its twin, so I googled it and found that does have some good points..

hi lucaa! and welcome to this fine forum! this is a fine place to advertise something like this. per the forum's home page: "For Sale or Wanted posts are allowed, but is restricted to one post, per

Thanks! The TX6800 does seem to be the likely match for the SX580. I checked it out on the tuner info and stereomono sites. Receiver and tuner both came out in 79. Looks like Pioneer put quite a