Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Emco-CNC-Users@groups.io group. File: emcoxfer.py Uploaded By: Description: A python

Upon further tries, it seems like it isn't a bearing issue after all. Every repetitive OD cut with the same parameter gets bigger and bigger about 0.002. Something seems to be skipping gears...again,

Larger machine looms and so these guys have to be sold :- A/ - Emco Compact 5 CNC Lathe with 6 position ATC Mechanically good, some marks to panels. The machine is configured for Wellturn system curre

Bonjour à tous, J'ai une fraiseuse EMCO VMC 100, j'ai besoin de recharger les données machine qui sont stockées sur une mini cassette alors que le calculateur dispose d'un lecteur de disquette. Est-ce

Hi, Regarding my Compact 5 CNC, I've never grasped why some 02/M99 commands run just fine and others trigger an alarm. I've been looking through the manuals trying to figure out what rule I'm running

Hello everybody, I've acquired a Compact 5 CNC lathe completely functioning and in very well condition. It's an MK4 and I would like to send programs to the machine with Mikes Free Interface. I've tri

I'm retrofitting a PCTurn 50 and would like to save the Berger steppers. I have studied the diagram for the control board (Y4A 018 000) and am stuck understanding at least three things about the contr

I am very new to Emco machines. But I bought three.and intend to convert one of the F1 CNC mills. So just as a preamble I have connected it up and have the panel lights on and the traverse buttons ind

Centrally inside the cabinet there is what I take to be the main driver board. It has three red diodes and these are not illuminated. Could I have dead card here?

I looked on the floor behind my rocking horse to no avail. Can B5-50 holders be obtained anywhere please?

Hi - There appears to be little or no machinery advertised in the group. - " Is it permitted?" If so are there any caveats to be observed?

Trying to decide on retrofit control system my Compact 5 + ATC. Have machines with Mach3, PlanetCNC and Estlcam. But happy to adopt any system for this, that will facilitate programming of the ATC ? A

The spindle in my VMC100 mill is getting rough. Tine to renew the spindle bearings. Does anyone know the spec of these bearings? On the parts list (item 19 on my diagram) they look like ordinary deep

Hi, for those who might be interested I have been able to purchase these belts in the UK from the BearingshopUK . they are 0.5 inch wide reference 480MXL050 - £2.76 each plus VAT and carriage. I got t

Bonjour à tous, Je viens d'acheter une fraiseuse EMCO VMC 100 TM02 et souhaite la rétrofiter. Le rétrofit d'une machine est une nouvelle aventure, Je suis intéressé par les retours d’expériences de ce

Hi. I hope someone can help me with a question about the spindle motor encoder on my VMC100 mill. I converted the mill to Mach 3. The motor is driven by a Parker variable DC drive - a bit basic but do

Anybody has documents describing how to connect the robot interface to the machine? I'm not sure what cables I need to connect and where to place it. Arjan

Hi everybody. does anybody know a current source of stepper drive belts in the UK ? - MXL 48 teeth 0.500 inch wide. thanks in anticipation regards John Bright

I believe it fits the Compact 5. 120vac. With reversing switch. $50 plus shipping. Marty Mesa, AZ

I have my EMCO PC Mill 55 now running on Siemens 810/840D and WinCAM and I have a Fanuc 21i license lying around. I see the current Siemens controls have dialog programming, and I really want to test