So I have some Emco PC turn 55 Lathes and Mills that I would like to fit with the Centroid Acorn but I have seen that people are having problems with the tool changer. I have down loaded the schematic

Hello. sul.mio.modello non.posso I can choose codes M but only codes _._, _._, _ Inviato dal mio dispositivo Huawei -------- Messaggio originale -------- Oggetto: Re: [Emco-CNC-Users] emco 5 cnc no st

Hi, I bought 7 EMCO compact 5 CNC and am retrofitting them with LinuxCNC. If anyone need the transformer, buttons or electronic card, I can let them go for free since I replace all the electronic comp

Hello everyone, I'm now a proud owner of a Compact 5 CNC MK4 (unfortunately without Toolchanger) 😊 I'm testing right now.... I use MFI at the moment and have some questions... I wrote a simple program

Just one other matter if I may. - Inside the machine back panel there was a large, fairly heavy "C" shaped fabricated frame. It was not attached, just sitting inside the cabinet. What on earth is this

Hi James. I have the complete control cabinet. One of the driver boards does not work, otherwise all OK. I am in Taunton . Please email me direct jsh.hiltons@.... Regards John

I was cleaning out my cabinet and found an Emco ISA card I know that people are frequently looking for these, so i figured I would post it here to see if anyone has any interest. Thanks, Jason

My Z axis is losing steps, and the only cause I can find is that the motor and ballscrew pulleys are very worn. The pulleys are mxl pitch, and are 40 teeth and 80 teeth. I can find some on the net, mo

Dear All Please let me know if someone have following PC Interface Board for EMCO PC turn 55. Emco PCCOM (RS 422) - Board (AC95) Product number is Y4A083000 Regards Sohail Sohail@...

Well, since I am basically at the end of my build, still messing around with programming the turret, thought I would buy a nice cutoff tool for it. I have most other tooling that will fit everything e

I haven't gotten any answers on my Z-axis motor, so what about replacing it? Anything anyone can recommend that will still use the original system? I want to upgrade to a Gecko, but not yet. Thanks, N

Hey everyone. I finished upgrading my compact5 CNC to stepper motors, smooth steppers and a gecko drive. It is running but I am having a hard time calibrating mach3 to get it to move accurately. I can

I have a PC 50 mill that was used a few times 20 years ago and has been sitting in class room. I'm replacing the steppers and controllers. If anyone needs any original parts, just email. I have everyt

I have a emco pc 50 turn and a emco pc 50 mill. Does anyone have the original software and manuals I can get from you?

I Downloaded the old emco CAD Cam Software from the file section. With my Compact 5 CNC i use a win xp Laptop. But the Old DOS Software won't run on xp. How did you manage it? Is there an additional t

Anybody want to sell his ISA computer card? I'm helping a school where the computer is gone, but the machine is still there. Regards Arjan

While I have the software installed on the PC for the PCTurn 50, the computer I have, an older Compaq 486/DX2-66 has an apparent bad floppy controller. Unsure I can turn the onboard controller off and

Hello, I downloaded the "5CNC.ZIP" from the file section and installed it succesfully! Is there a DXF-Import function? I've read it somewhere?!? Greats Felix

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Emco-CNC-Users@groups.io group. File: Bedienungsanleitung EMCO Compact 5 CNC.pdf Uplo

I have a Compact 5 CNC, All of a suddent the stepper motor that drives the tooling (left and right directions) stopped working. The motor itself is good still, it's moving. I thought it might be the b