I have an Emco 50 Mill. Also some manuals and software. But you also need a code that matchs with your RS485 card. Jan

I'm trying to correct Backlash in m EMCO Concept 105. I tightended the nut (16) and it helped a lot, but still when I press against the table I get something like .25mm movement (corrected from .9mm).

I want to use drills in my EMCO 6P, but in an online search I don't find reduction sleeves from the 20mm hole in the turret to any other size. Where should I get these? Arjan

Hi All, Anybody have an exploded view for the (manual ver.)? Trying to figure out how the (X axis) anti-backlash nut works... Thanks!

Hi Everyone, I'm new to this group and have been having trouble getting through the wincam tutorials (level 2) that came with the pc55 lathe. I would like to ask if anyone could help clarify what I am

Does anyone have a spare tailstock, or just the main casting, that they'd be will to sell? --Mike

I have been working on a 8 position turret for an modified compact 5. The turret uses a NEMA 23 stepper and a single microswitch for position #1. The controller is an Ardunio Mega with a touchpad and

Hi can someone tell me what bearings are used inside the tailstock in 120/220 P version? Mine are missing :) Thanks Stefan

hello everybody, I just registered, I have two Emco lathes, a pc version and recently a cnc version that I can't get to work, the spindle turns, if I select the manual operation pressing the direction

hello giorgio, the lathe works but does not accept the M codes but only the G codes, the spindle has only functions of selector on / offe, if I write the proggram everything works correctly, I can't c

hi, yes ho.tried it introduced a program of a few lines on the machine and everything works correctly, but I wanted.to try a program send with more than 160 lines from pc, but with adapter does not go

I installed 840D control on my "new to me" Concept Mill 105. pulled the MSD and PLC data from a with the machine included CD. Now I tried to do a toolchange but to hear the Z axis going up and then a

Hi does anyone here has experience with this type of lathe? I am about to purchase one, and one of the things that interests me the most is there a way to load the gcode to the machine (and not use th

So I see this has been posted about quite a bit but I thought would ask a question specific to my application. I have an Emco Compact 5 CNC (yellow one. Early 90’s I think). I retrofitted it with new

So I have some Emco PC turn 55 Lathes and Mills that I would like to fit with the Centroid Acorn but I have seen that people are having problems with the tool changer. I have down loaded the schematic

Hello. sul.mio.modello non.posso I can choose codes M but only codes _._, _._, _ Inviato dal mio dispositivo Huawei -------- Messaggio originale -------- Oggetto: Re: [Emco-CNC-Users] emco 5 cnc no st

Hi, I bought 7 EMCO compact 5 CNC and am retrofitting them with LinuxCNC. If anyone need the transformer, buttons or electronic card, I can let them go for free since I replace all the electronic comp

Hello everyone, I'm now a proud owner of a Compact 5 CNC MK4 (unfortunately without Toolchanger) 😊 I'm testing right now.... I use MFI at the moment and have some questions... I wrote a simple program

Just one other matter if I may. - Inside the machine back panel there was a large, fairly heavy "C" shaped fabricated frame. It was not attached, just sitting inside the cabinet. What on earth is this

Hi James. I have the complete control cabinet. One of the driver boards does not work, otherwise all OK. I am in Taunton . Please email me direct jsh.hiltons@.... Regards John