Hi, guy so my next intention is to run the pc50 mill with a ge fanuc controller. I was able to install the winnc program on a windows xp computer, but it appears that the program don't see the control

Hi guys, Rick here with a problem. I bought an emco pc50 mill that came with the old computer system. The mill was running good when I tested the movements. But today when I went back to run it again

hello there i have recently got a VMC 100 1995 and have found that the spindle motor casting has been damaged and I think I will need to replace it if anyone can help ( i will also be looking for othe

I have a clean CNC 5 for sale in Woodland Hills. Have manuals and extra tape drive and one tape. $2200 local pickup, will not ship. Please contact me at zg925@... if interested. Zg925athotmaildotcom

Hi, I have just got hold of an Emco Compact 5PC, it all seems to be in working order. What is the recommended SW for it nowadays? MACH3, MACH4 or what else is there out there?

Hello i am Jord from the Netherlands. Is there any on that can help me to understand how to work with the original Wincam software to get my machine to work normally. I have all the books and software

I have an Emco 50 Mill. Also some manuals and software. But you also need a code that matchs with your RS485 card. Jan

I'm trying to correct Backlash in m EMCO Concept 105. I tightended the nut (16) and it helped a lot, but still when I press against the table I get something like .25mm movement (corrected from .9mm).

I want to use drills in my EMCO 6P, but in an online search I don't find reduction sleeves from the 20mm hole in the turret to any other size. Where should I get these? Arjan

Hi All, Anybody have an exploded view for the (manual ver.)? Trying to figure out how the (X axis) anti-backlash nut works... Thanks!

Hi Everyone, I'm new to this group and have been having trouble getting through the wincam tutorials (level 2) that came with the pc55 lathe. I would like to ask if anyone could help clarify what I am

Does anyone have a spare tailstock, or just the main casting, that they'd be will to sell? --Mike

I have been working on a 8 position turret for an modified compact 5. The turret uses a NEMA 23 stepper and a single microswitch for position #1. The controller is an Ardunio Mega with a touchpad and

Hi can someone tell me what bearings are used inside the tailstock in 120/220 P version? Mine are missing :) Thanks Stefan

hello everybody, I just registered, I have two Emco lathes, a pc version and recently a cnc version that I can't get to work, the spindle turns, if I select the manual operation pressing the direction

hello giorgio, the lathe works but does not accept the M codes but only the G codes, the spindle has only functions of selector on / offe, if I write the proggram everything works correctly, I can't c

hi, yes ho.tried it introduced a program of a few lines on the machine and everything works correctly, but I wanted.to try a program send with more than 160 lines from pc, but with adapter does not go

I installed 840D control on my "new to me" Concept Mill 105. pulled the MSD and PLC data from a with the machine included CD. Now I tried to do a toolchange but to hear the Z axis going up and then a

Hi does anyone here has experience with this type of lathe? I am about to purchase one, and one of the things that interests me the most is there a way to load the gcode to the machine (and not use th

So I see this has been posted about quite a bit but I thought would ask a question specific to my application. I have an Emco Compact 5 CNC (yellow one. Early 90’s I think). I retrofitted it with new