Hello all. I’m new to this so please be gentle, I have an Emco Compact 5 CNC with a 6 tool turret(the yellow one). It is decent condition and I would like to retrofit it to be able write programs in G

Wanted to buy inexpensively, PN Y4A 015 000 or Y4A 012 000 axis controller for AC88 vintage.PC Mill or PC Turn. I would prefer a Mill control, but beggars cant be choosers. My intent is to pull the fi

Just scanned over this post after being pinged all day, In all honesty they are have there good points and bad there is no wrong way to do it, it's all down to budget I have seen someone to a retrofit

It seems that my original post has become inundated with advertisements for a product called Acorn and its promoters video channel. Let me tell you why I am not using this product. If you are, good fo

This is a rather excellent piece of work by a fellow in Finland (I think). I have not seen it posted here and I emailed to ask if I could post his files but have not heard back from him. I don't think

Like everybody else I am upgrading my Compact 5. As an engineer in the 80s I am completely comfortable with the electronics and have done some repairs despite the lack of decent schematics. My machine

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Emco-CNC-Users@groups.io group. /Emco PC Turn 50 & PC Mill 50 documenta

Not sure what I need to do. Complete newbie to FANUC controls and emco machine. Any help is appreciated

Hi Thankyou for the membership. I have a emco vmc100, and have lost the MSD. I tried to contact emco, but No help to get the MSD. Have checked inside, No papers, No tapes. Hope someone have the MSD, a

Hi Doug I can open the file, and Read it 😁 Will try print it and punch it in, and see what Will happen. 😁 Thank you Regards Tony Sendt fra Yahoo Mail på Android

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Emco-CNC-Users@groups.io group. /_Compact5_EN.pdf Uploaded By: lancia03

Hello, If someone has Emco 5 Compact manual, please send.

Hello all, I have been working on my PCMill 50 with Fanuc 0 control (AC88) and was wondering what the max feeds/speeds are for others machines. Stock, my machine topped out at 29IPM feedrate, and 2500

I just aquired a new to me EMCO Turn 50. I got it with the original PC with wincam. The first time I booted I tested the axis and spindle and axis worked, but the second time the spindle does not star

Hi, guy so my next intention is to run the pc50 mill with a ge fanuc controller. I was able to install the winnc program on a windows xp computer, but it appears that the program don't see the control

Hi guys, Rick here with a problem. I bought an emco pc50 mill that came with the old computer system. The mill was running good when I tested the movements. But today when I went back to run it again

hello there i have recently got a VMC 100 1995 and have found that the spindle motor casting has been damaged and I think I will need to replace it if anyone can help ( i will also be looking for othe

I have a clean CNC 5 for sale in Woodland Hills. Have manuals and extra tape drive and one tape. $2200 local pickup, will not ship. Please contact me at zg925@... if interested. Zg925athotmaildotcom

Hi, I have just got hold of an Emco Compact 5PC, it all seems to be in working order. What is the recommended SW for it nowadays? MACH3, MACH4 or what else is there out there?

Hello i am Jord from the Netherlands. Is there any on that can help me to understand how to work with the original Wincam software to get my machine to work normally. I have all the books and software