Hi all, I'm wondering about the functional differences between T1 and T2. Has anybody worked on both in order to compare them? Is the T2 only easier in use or does the T2 offer functions or opportunit

Hey does anyone know the tool change command for the turret to change tools? I tried m06 T0101 and it says value too long. I also tried t01 and nothing. I’m able to press CTRL-1 and it rotated but not

Can someone upload their C:\WinNC directory for the PCturn50 and PCmill50? I’m having some issues with configuring. Thanks!

Thinking of selling my compact 5 lathe if anyone is interested as It not getting used enough. nick

The shield on my C5 was too dark and scratched so I decided to make a new one. I laser cut some acrylic and bent it using a strip heater. It came out really good, so I figured I'd post it here in case

Gentlemen, I kindly ask for your support My cnc 5 hangs, when the program reaches G78. In manual mode it shows rpm. When I switch from manual to cnc mode the indicator turns dark. Obviously it's becau

Hello Emco Lovers, i have a F1 and will make a Retrofit ! First problem is the Stepper Motor! The original shaft lenght is 24mm ....I find never a Motor with this Length....! What have do the Other wh

So i bought a compact 5 cnc some time ago mostrly to learn the basics needed for homegarage use. Everything has been working fine except the tool turret. Already from day 1 it acted a bit strange. Whe

Hello, I had an Emco pc turn 50. I saw the lathe working when I bought it. In transportation the computer mother board failed. I converted the lathe and gave it to my son. I kept the hard drive from t

Hi All, I found a short text about a research paper where a guy decoded the EMCO TCP signals. The network protocol used in communication was identified as Transmission Control Protocol (TCP). To achie

Hello all. I was curious if anyone has the WINNC software. I have the MSD files, just don’t have an installation file of WINNC as the drive is corrupted. I’ll gladly pay for it. Thank you.

so as David suggested, Freedos was not compatible with running the lathe software, My teacher provided me with a bunch of floppy drives and I was able to download Dos 6.22 and then the lathe software.

Hi All, I've got an Emco F1 Woodworker in quite good condition. I assumed, that I just need to change the beltgears between electricmotor and spindle to change the ratio from 8000rpm to 2000rpm. Today

I have emco pcturn55 in a perfect working order hardly used updated already to latest win98 to accept flash usb, am asking $2500 for the whole unit with pc, if not sold within a week planning to conve

Hello, I am looking to convert an Emco F1 mill. Question 1. What stepper power motors does this need, (volt/amp or torque?). Question 2. Has anyone used the Masso G3 controller, to convert an Emco CNC

Hello, I am a high school student who was asked by my teacher to revive a Compact 5 PC machine. Keeping it short, the machine is fine but the computer running it died. Using a new PC I was able to mak

Bonjour à tous, Je viens d'acheter une fraiseuse VMC 100 TM02 la face du calculateur à dû être changé car elle est équipé d'un lecteur de disquette alors que les données MSD de ma machine sont sauvega

Hi! I have a vmc-100 and inside is a Willy Vogel oilpump. I wonder a bit about how it is supposed to work? There is AC going in to start the pump but also a solenoid. Should I first run the pump to ge

Hi can any of you help me out and tell me whats the designation/name of the collet on the picture? I tried to take dimensions as accurate as I can with a calipers. Thanks Stefan

Im got a very early converted Mach3 EMCO6p and I'm looking if it has any home/limit switches? Where should I look? It does not home, or give a signal passing a certain point, so it must bebe connected