I recently got a VMC-100 with missing MSD information. When I turn the controller on it boots up into edit mode, with the below codes: alarm 780: safety lock active. alarm 460: reference position acti

Good day everybody, I have a defective CPU from a Compact 5. Unfortunately, an incorrect segment display only occasionally appears when starting. Operation is no longer possible. Does anyone have any

I have the DC spindle motor for my C5 that works, spins and vibrates after the balance mass on the armature let go. I made a balancing ring between the commutator & rotor iron with m6 slugs to spend f

Context : This post follows on from conversation on a separate thread. ( Compact 5CNC CPU schematic ). I am looking for the ROM code for the later EMCO C5 lathe. Hello again Dieter - and others.... It

Hi EMCO friends around the globe, First of all I really appreciate everybody’s input and contribution in this group. I read all the messages and it is because of this group’s support I was able to sta

That's because the interface card was built into the 55 series 2 machines electrical cabinet. It also had a mini ITX P.C. in the cabinet as well. One still needs a external P.C. with a Ethernet connec

To All: Does anyone out there know who purchased the EMCO PCmill50 from Tennessee? The auction included a box of Lathe stuff and I am interested in buying the contents minus the CD’s. It appeared that

This past weekend my powerdrawbar air manifold decided to lock up. I took off the snap ring and bushing and it will not budge. I dont want to have to purches a new ROHM drawbar assembly. Has anyone re

Guys... Internals from the PC Turn 50 Untested, as-is What’s it worth? Buyer pays shipping, US preferred. Shipping from Spokane, WA 99223 Brad

Hello everyone! first i would like to apologize for my english (google translator + some corrections). then, for more than a year i have been in possession of an emco f1cnc milling machine and a compa

Hello ! I'm looking for ratio for spindle pulleys. And for ratio for ballscrew pulleys. Ballscrew pitch looks like for 2.5mm, and ratio 0.5 but not sure. Thanks !

Hi guys, I have the leftover Windows 98 computer that came with an EMCO PC Turn 50 lathe. It has the ISA slot. The hard drive is dead but it does power up and you can enter into the BIOS. I've given u

I hope that I did not just purchase a $1700. paper weight. I have been turning fountain pens on conventional machinist lathe for 20 years. To date around 3,000 pens. I just retired from my day job of

Hi. Does anybody have a list, or can point me to the documentation, of the supported G codes when the lathe is run in the Emco55 mode. I know buried in the Software Manual it says DIN/ISO 66025, but t

I have gone through small steps to get this emco PC turn 55 running and I have not been successful. I get an error code (8140 ACIF not responding) not sure if this stops me from doing anything all I k

Chris, post either the Ebay item number or a link to the machine. These guys can tell you more, but $1700 for a machine you can't see running seems awfully stiff for me. The fact that it doesn't have

Hi, I have (2) Fanuc control panels for sale, they were received with an Emco PC Turn 50 lathe. They are in OK condition (see photos) and untested. Selling as is. I'd like to sell them as a pair for $

Hi, I just bought an used PCMILL 55. The computer has win98 first edition + wincam in dutch. I want to change language in wincam from dutch to english. It is possible? Thank you Federico

Does anyone have any experience with this? I am reluctant to put my hand into the Autodesk Monkey Trap, preferring to believe that if I buy a spanner, I expect it to remain a spanner in my toolbox ind

Bonsoir, Voilà j’ai reçu ma carte Acorn Centroid et fait un câblage test. Le Logiciel reconnait bien la carte. J’ai branché un driver chinois (2H45B) mais ça ne fonctionne pas. Quel type de driver je