Topics

EMCO PC Turn 50 Spindle wont rotate


arjan.dijk
 

I just aquired a new to me EMCO Turn 50. I got it with the original PC with wincam. The first time I booted I tested the axis and spindle and axis worked, but the second time the spindle does not start. (I know there was some error with the spindle). If I run a program the spindle does not start and the XZ axis start to move. What can I do to track the problem? What can I measure with a multimeter? Anybody had this problem?


Croonen
 

hallo Arjan, ik heb nog 2 modules liggen van een emco turn 50 voor de spindel als je ze nodig heb laat dan maar iets weten.


Op vr 27 sep. 2019 om 22:53 schreef arjan.dijk <arjan.dijk@...>:

I just aquired a new to me EMCO Turn 50. I got it with the original PC with wincam. The first time I booted I tested the axis and spindle and axis worked, but the second time the spindle does not start. (I know there was some error with the spindle). If I run a program the spindle does not start and the XZ axis start to move. What can I do to track the problem? What can I measure with a multimeter? Anybody had this problem?