Topics

Ris: [Emco-CNC-Users] emco 5 cnc no start


alessandro212
 

Hello. sul.mio.modello non.posso I can choose codes M but only codes
_._, _._, _

Inviato dal mio dispositivo Huawei


-------- Messaggio originale --------
Oggetto: Re: [Emco-CNC-Users] emco 5 cnc no start
Da: "f1pmiller via Groups.Io"
A: Emco-CNC-Users@groups.io
CC:


you need a start line with spindle speed, tool etc and a M30 end line in cnc mode


MCOGS
 

The start line is 91 for incremental or 92 absolute. If 92, x and z are offset values from center. 

A M03 turns the spindle on. 
You also need a m30 to end the prog.