Hi Tim The Mill's a '97 iirc, I'm not really looking to sell it unless I can replace it! I'll be buying another PC from Emco in the near future and restoring it once I'm done with the big lathe. Thank

Hi all Selling some stuff as I need some space, and I also don't need 3x CNC lathes... I have a PC Turn 120 for sale, was 100% working but an opto sensor on the toolchanger has gone and I have my hand

I've tried editing the MSD as you say with no luck. I know Emco UK just referred my request to Emco Austria, so why not email them and see if you can get it directly? Happy to send you my MSD, I just

Hi Get in contact with your local Emco reseller. If you provide them with your serial number, they'll give you your MSD image. Emco UK were very helpful! I also have a PC Turn 120 from 1997-98 (can't

I had great difficulty in finding the floppy version of Windows 98, the solution I went with was piggybacking an internal CD ROM drive set to slave on the same IDE cable as the hard drive and installi

Not for the compact 5, but I can take code from the LinuxCNC post processor and hand edit it to work on Fanuc 0. It's slow going and tedious but perfectly usable with some time.

I've checked the optical sensors, it's all very clean but I cleaned it again anyway. I need to remove it properly and meter the sensors but I don't have time to do that until next week. I do get a sen

I think the problem is mechanical. If I take the tool turret off, I can see it turning in reverse and I get a "6040 Tool Turret Index Failure". If I put it on (even loosely), it indexes and then no to

Hi Michel The machine is running! I can use almost all the functions now. The only thing that doesn't seem to operate is the tool changer. I have tried M6;Tx, just Tx, the display changes but the tool

Hi Michel I have the MSD for the Turn 120 from Emco, they are in the process of getting me the MSD for the Mill 100. I used the "SUPERVISOR" password in Wincfg though and it appears I might be able to

Hi Michel! So I am using the AC88 software from this group, there is no installation, it's just drag and drop so it only has Mill50 and Fan0.m folders with it. I also have a 5 floppy set up from this

Hi all, I've managed to get the AC88 WinNC to run on the PC, but I believe I need different folders. The folders supplied are Fan0.m, and Mill50. If you have them, please can you upload: Fan0.t Mill10

So I've managed to install everything I need except I need the machine data disk. Emco haven't responded to any of my recent emails. Is there another way to get hold of this? Thanks!

Thanks for clearing that up! I'll give that a go as soon as I've got the PC running. Currently waiting for a >66mhz processor to install Windows 98.

I’m not sure what you mean by AC88? Sent from Mail for Windows 10

Hi Does anyone have copies of WinNC Fanuc 0T and Fanuc 0M for Windows 98? Emco are currently looking for me but not having a lot of luck but if they find them I’ll upload them to the files parts of th